Guide: DIY Printed Circuit board Making
DIY Printed Circuit board Making.
Printed circuit board or PCB has its vital role in today’s high-tech life. From TV to toys from Computer to mobile, all electrons work with a PCB inside. Commonly a PCB is made up of a fiber board with copper tracks to join different electronic components together so that they can acts as a single unit or circuit. A PCB can have from a single layer of copper connection used in common electronics like toys, in pc mouse etc, or can have up to seven connection layers in single PCB used in Computer motherboard or mobile phone PCB.
Today by this small tutorial I like to share with you the most common process of DIY PCB making at your home. I came to know this process in my school time, but one can Google and find many process of PCB making. Secondly I adopted this process because it’s very easy and low in resources. There is no proper name for this process but generally it’s called “Laser print PCB etching”.
As the name says a laser printout is etched on a blank PCB.
Items needed:
1. PC and a Laser Printer (to design and printout the circuit layout).
2. Toner Transfer Paper (to transfer the toner layout on to the PCB).
3. Blank PCB.
4. Hex blade, zero no. sandpaper and files (to cut the desire piece of PCB, polish and file the rough surface).
5. Lamination Machine.
6. Ferric Chloride and Iso-Propanol.
7. Plastic washing tray and brushes.
8. Drill bits to drill holes on to the PCB for component placement.
Few WARNIGS:-
1. Be very care full when using cutting or drilling tools. If you are not familiar with these tools better get help from a professional.
2. Be very-very careful when working with CHEMICALS. Try not to come in direct contact with the chemical, if so immediately wash the effected body part with lot of running water.
3. For eching process FeCl3 solution is needed. When adding H20 to FeCl3, fumes of HCL is releases which is harmful when inhaled.
Now let’s get started. In this tutorial I am making a 4-channel Fan Controller.
Initial circuit design and layout is done.
http://img812.imageshack.us/img812/653/43050887.jpg
http://img715.imageshack.us/img715/2852/tt2z.jpg
Now printing the layout on to the toner transfer paper.
http://img405.imageshack.us/img405/8358/59529154.jpg
Now cutting the blank PCB.
http://img444.imageshack.us/img444/3866/img0753j.jpg
http://img530.imageshack.us/img530/9760/img0754cn.jpg
Now use sand paper to make the PCB clean and shiny.
http://img687.imageshack.us/img687/7544/img0755o.jpg
Role the PCB and printout through the lamination machine, this will stick the paper onto the PCB. Now leave the PCB in soap water for an hour and then genteelly peel off the paper. Now PCB has only toner in the form of the circuit layout.
http://img243.imageshack.us/img243/3027/img0756f.jpg
http://img535.imageshack.us/img535/3434/img0757sd.jpg
Now it’s time to bring the chemicals in action.
http://img815.imageshack.us/img815/4262/img0748.jpg
Add some distilled water in a plastic tray. (USE ONLY CHEMICAL DISTILLED WATER) battery water has some acid properly.
http://img193.imageshack.us/img193/3594/img0758ih.jpg
Now add FeCl3 powder.
http://img249.imageshack.us/img249/733/img0759x.jpg
Hot exothermic reaction, HCL fumes are librated.
http://img408.imageshack.us/img408/5841/img0760o.jpg
Drop the PCB in.
http://img815.imageshack.us/img815/2712/img0761.jpg
Leave it for an Hour.
http://img819.imageshack.us/img819/381/img0762.jpg
http://img101.imageshack.us/img101/3716/img0763gg.jpg
Look carefully Fecl3 is eating the copper.
http://img180.imageshack.us/img180/3007/img0764x.jpg
http://img710.imageshack.us/img710/1116/img0765d.jpg
http://img339.imageshack.us/img339/3222/img0766t.jpg
After etching only toner is left.
http://img13.imageshack.us/img13/5672/img0767kc.jpg
Clean the PCB with Iso-Propanol.
http://img526.imageshack.us/img526/8947/img0768sb.jpg
http://img229.imageshack.us/img229/7598/img0769t.jpg
This removes the toner and shiny copper tracks are left.
http://img32.imageshack.us/img32/6221/img0770mj.jpg
http://img576.imageshack.us/img576/7602/img0772u.jpg
it’s time to drill some holes. I am using 1mm drill bit and a DC motor for this job.
http://img31.imageshack.us/img31/120/img0773l.jpg
http://img256.imageshack.us/img256/528/img0750e.jpg
http://img265.imageshack.us/img265/9062/img0774em.jpg
http://img229.imageshack.us/img229/6711/img0775z.jpg
Done. Your PCB is now ready to be fitted with the components.
http://img696.imageshack.us/img696/2402/img0776qb.jpg
http://img44.imageshack.us/img44/6256/img0777j.jpg
All assembled and undergo testing. Seems everything is fine and the circuit is working perfectly.
http://img190.imageshack.us/img190/8862/img0778bt.jpg
Some pics of final product.
http://img28.imageshack.us/img28/5082/img0779a.jpg
http://img268.imageshack.us/img268/7365/img0780a.jpg
http://img341.imageshack.us/img341/2766/img0781iu.jpg
http://img4.imageshack.us/img4/1743/img0782tq.jpg
This finishes my tutorial. Hope you like it.
I have tried my best to put this tutorial in good shape, but still please ignore any mistakes.
Thanking
Rakesh Sharma
