Gigabyte GA-X58A-UD9 goes 4WAY SLI with GTX 480

Hey fellows,

I know quite a few results have been posted lately with UD9, so I am not going to discover anything extraordinary with my 5,6GHz i980X "champ". However, even if some results have been shown, and some forum sneak peaks have been done, I though that a more "official" preview would not hurt anybody. So I did a nice, clean preview on our website. You might be asking what the heck is so interesting about that. Yeah...I forgot to mention...I did a small "4 x GTX 480 on Gigabyte UD9" preview on our website. Now it sounds more interesting, doesn't it? :yepp:

Anyway, the 4WAY SLI is not the main focus here, I am preparing a massive 1,2,3,4 GTX 480 vs 1,2,3,4 HD5870 article that will be up soon and there I will have lots of numbers about this. The most interesting part is that now 4WAY SLI can be done on other mainboards, not just EVGA 4WAY SLI and SR2. If you want to read the full story, you can use Google Translator. If not, here's some UD9 pics and some 3SLI and 4SLI numbers for you :)


http://lab501.ro/wp-content/uploads/2010/05/46k.jpg
http://lab501.ro/wp-content/uploads/2010/05/UD9.jpg
http://lab501.ro/wp-content/uploads/2010/05/176k.jpg
http://lab501.ro/wp-content/uploads/2010/05/UD9-00.jpg

http://lab501.ro/wp-content/uploads/2010/05/UD9-01.jpg
http://lab501.ro/wp-content/uploads/2010/05/UD9-32.jpg
http://lab501.ro/wp-content/uploads/2010/05/UD9-22.jpg
http://lab501.ro/wp-content/uploads/2010/05/UD9-07.jpg
http://lab501.ro/wp-content/uploads/2010/05/UD9-21.jpg
http://lab501.ro/wp-content/uploads/2010/05/UD9-26.jpg

Congrats , cheap stuff !

I would like to see what could this monster mashine do on 3DMark06 :rolleyes:

well it's looks like motherboard just need 2x nf200 to run quad sli ;)

I want one. (ud9)

Specifically I want a limited edition ALL BLACK version. No wiring schematics no port labeling no nothing. The schematic in the manual is plenty.

Also it seems the giant heat pipe doesn't block any thing like it does on the ud7? Good news.

Edit: is that 4.8 ghz with ln2? If so isn't that really high vcore, especially for ln2?? I got 4.8 under water with much much less vcore.

Monstru's 980X isn't the best unfortunately :( That 4.8GHz frequency is on singlestage phase change cooling ;)

Nice one bro :up: Now remove those stock oven heatsinks and go for some proper all-LN2 action :yepp:

nice review monstru

whats the max vcore in bios? 1.9v like ud7?

man is very ignorant.:eek:

Any chance of seeing what BCLK this can push? I'm really interested in picking one up when it releases, but I'll be using a 920...

nice
wait till you get final revision PCB too :D

nice stuff..... UD9 :surf: wahoooooooo

nice with 4way SLI on another board than EVGA :)

going extreme with 5.6Ghz++ GT + LN2 on cards anytime soon monstru?

and, is the NF200 a must for doing 4way SLI?

This board looks awesome, you guys have any idea of release date?

not long now :up:

what's the minimum expansion slots needed for the motherboard?

Quote:

---

Originally Posted by bobisgod

what's the minimum expansion slots needed for the motherboard?

---

what do you mean?

Quote:

---

Originally Posted by dinos22

not long now :up:

---

Hey dinos can I ask something?

What's its name gonna be? I've heard that it might be named UD9, or UDP7, or UD7P... My bet's on UD9 :yepp:

X58A-UD9 :up:

Nice run there...
4X 480s me likes!!! :up:

Quote:

---

Originally Posted by overclock1366

Congrats , cheap stuff !

---

Thx bro

Quote:

---

Originally Posted by a4kata

I would like to see what could this monster mashine do on 3DMark06

---

2k6 does not scale that good with 4GPU's. Vantage is the most impressive with 4 and 2k3 with 3 GPU's.

Quote:

---

Originally Posted by FatAlbert

well it's looks like motherboard just need 2x nf200 to run quad sli

---

In theory yes, but there is also some bios/driver "thing" needed. I am struggling to get 4Way working on R3E, but no succes untill now.

Quote:

---

Originally Posted by mbreslin

Also it seems the giant heat pipe doesn't block any thing like it does on the ud7? Good news.

Edit: is that 4.8 ghz with ln2? If so isn't that really high vcore, especially for ln2?? I got 4.8 under water with much much less vcore.

---

Yes, the heatpipe does not get in the way. 4.8 is done on SS, 5,6 is done on LN2.

Quote:

---

Originally Posted by George_o/c

Nice one bro Now remove those stock oven heatsinks and go for some proper all-LN2 action

---

Thank you bro. I wish I could go for some proper all-LN2 action, but unfortunately not all the VGA's are mine, so a few of them must go back. I will however hit singleGPU LN2 GTX 480 pretty soon.

Quote:

---

Originally Posted by bassplayer

Any chance of seeing what BCLK this can push? I'm really interested in picking one up when it releases, but I'll be using a 920...

---

I am not working on that for the moment, since I have to finish my 4Way SLI review. This was just a fast sneak preview of the boards capability of doing 4Way. That is why I didn't push to much on BCLK, CPU clocks and such. For that, there are other guys working hard here on XS with this board. :)

Quote:

---

Originally Posted by Hondacity

nice review monstru

whats the max vcore in bios? 1.9v like ud7?

---

Thank you bro, but this is just a simple preview, not a review. I wanted to give you guys a sneak peak before the retail product is launched.

Yes, max vcore is 1.9v.

Quote:

---

Originally Posted by dinos22

nice
wait till you get final revision PCB too

---

Thx bearded one :) Is the final revision PCB even cooler then this? Could they please, oh pretty please, add PCI-E disable jumpers on this board, and an external control unit (like EVGA has)? That would make it a blast.

Quote:

---

Originally Posted by systemviper

nice stuff..... UD9 wahoooooooo

---

Thank you :)

Quote:

---

Originally Posted by dpa

going extreme with 5.6Ghz++ GT + LN2 on cards anytime soon monstru?

and, is the NF200 a must for doing 4way SLI?

---

I will go extreme on single-card only :(
Yeah, 2 NF200 chips seem to be a must for 4Way SLI mobos.

Quote:

---

Originally Posted by Harshal

Nice run there...
4X 480s me likes!!!

---

Thank you my friend :)

Good stuff m8 :up: Keep it up :)

Than you miah!

Now I have a dream....with an A0 hand-picked Gulftown, that could do at least 6GHz 3D, so I could really have fun with this one and put it to work... Oh well, dream over, back to my B1 ES =))

Now, I am pretty amazed nobody noticed something very interesting. I wrote about it in my preview. Check the VRM better :)

Very cool mate :up:

Quote:

---

Originally Posted by Monstru

Thx bearded one Is the final revision PCB even cooler then this? Could they please, oh pretty please, add PCI-E disable jumpers on this board, and an external control unit (like EVGA has)? That would make it a blast.

---

PCI-E disable jumpers would be nice, but external control unit not really needed, they didn't put the buttons under the 4th card like evga did.

Mmmmm, then again, if one was to take the mem cold it could be an issue.

Nice 4 X GTX480 Bro :yepp:

you can always revert back to standard jumpers unless you want to go 4WAY SLI on LN2 and RAM on LN2 as well :shocked: now that would be sweet :D but it would be a bit silly hahaha