Retail 980X with Gigabyte board plus...

Printable View

04-16-2010, 12:08 AM
stephenyeong

Retail 980X with Gigabyte board plus...

It seems it is my first new thread here.

Got a retail i7 980X for 2 days, with some overclock tested on a non retail board.
I brought it because it has a impressive low voltage compare with other LGA1366 CPUs I never seen before.

My config
Intel core i7 980x
Gigabyte GA-X58AUDxxxx
Kingston 2000CL8
Antec TPQ-1200OC
OCZ Vertex Turbo
Cooling: water (D-Tekv2 + blackice GTS360 single pass + D5)

First, lowest uncore test (seems some board not adjustable)

seems my config can only run DDR3 1600 with x13 uncore
http://www.stephenyeong.idv.hk/wp/wp...est-nb-x13.jpg

3000MHz uncore is lowest for DDR3 2000
http://www.stephenyeong.idv.hk/wp/wp...st-nbx15-2.jpg

Then some basic bench
4.4G wprime 32M, 1024M
http://www.stephenyeong.idv.hk/wp/wp...jpg?1146278348

4.8G wprime 32M
http://www.stephenyeong.idv.hk/wp/wp....jpg?233156061

With a 5G CPU-z validation,
I know someone can did it with higher result on water too before
http://www.stephenyeong.idv.hk/wp/wp...g.jpg?39049311
04-16-2010, 12:30 AM
Mad222

Way to go, Stephen:clap:
04-16-2010, 01:22 AM
Labrador

@stephenyeong
Nice! :up: :clap:
batch of this retail???
04-16-2010, 02:50 AM
Yolanda

How much MHz can it give for 24/7 fully stable?
04-16-2010, 06:24 AM
stephenyeong

Quote:

Originally Posted by Yolanda

How much MHz can it give for 24/7 fully stable?

I think for 7x24, I will run it at about 4500MHz
1.22V for 4G
1.4v can run 4.6G 3dmark

I will choose a clock which can run stable with voltage of 1.35v
04-16-2010, 06:29 AM
Movieman

Quote:

Originally Posted by stephenyeong

I think for 7x24, I will run it at about 4500MHz
1.22V for 4G
1.4v can run 4.6G 3dmark

I will choose a clock which can run stable with voltage of 1.35v

How much VTT did you need to get to 5000mhz?
Vcore I assume was at 1.5v?
04-16-2010, 06:33 AM
SteveRo

Quote:

Originally Posted by stephenyeong

I think for 7x24, I will run it at about 4500MHz
1.22V for 4G
1.4v can run 4.6G 3dmark

I will choose a clock which can run stable with voltage of 1.35v

Same here - 980x on chilled water - 4.5 seems good for 24/7, below intel max voltages and temps well under control <60 under load.
04-16-2010, 06:44 AM
stephenyeong

Quote:

Originally Posted by Movieman

How much VTT did you need to get to 5000mhz?
Vcore I assume was at 1.5v?

Because uncore not running at full speed, as I remember about 3000mhz at that moment, VTT should below 1.3volt.

Vcore is 1.4875 not 1.5v, validation only no need too high voltage.

However, benching with 4.8GHz need about 1.5volt.
04-16-2010, 06:47 AM
Movieman

Quote:

Originally Posted by stephenyeong

Because uncore not running at full speed, as I remember about 3000mhz at that moment, VTT should below 1.3volt.

Vcore is 1.4875 not 1.5v, validation only no need too high voltage.

However, benching with 4.8GHz need about 1.5volt.

Thanks for the info.:up:
Trying to get an idea of what I'll need to push my X5680's to on the SR2 to get to 5000mhz..
04-16-2010, 08:43 AM
radaja

stephenyeong,excellent first thread and awesome OC results:up:
04-16-2010, 09:06 AM
klataa

Quote:

Originally Posted by Labrador

@stephenyeong
Nice! :up: :clap:
batch of this retail???

Tell us what batch :) its important for those who want buy one:)
04-16-2010, 04:12 PM
gosmeyer

Quote:

Originally Posted by stephenyeong

I think for 7x24, I will run it at about 4500MHz
1.22V for 4G
1.4v can run 4.6G 3dmark

I will choose a clock which can run stable with voltage of 1.35v

Yep :up:
04-16-2010, 04:39 PM
mk-ultra

Quote:

Originally Posted by stephenyeong

I think for 7x24, I will run it at about 4500MHz
1.22V for 4G
1.4v can run 4.6G 3dmark

I will choose a clock which can run stable with voltage of 1.35v

mine is pretty identical with yours on water

1.35 for 4500mhz
and 4.8 max benchable

got it to validate to 5234 tho :D
no cold yet, need to get a few vga first
04-17-2010, 08:13 PM
Mad222

New batches are pretty impressive on Air
Guess it's 4.5g-4.6g stable with good cooling
Max. CPU Freq. over 5.25g ?:) Not a problem with this baby, man!:D
980x is invincible.....clap::up:

http://i967.photobucket.com/albums/a..._PI32m_Air.jpg

http://i967.photobucket.com/albums/a...80x_06_Air.jpg

http://i967.photobucket.com/albums/a...wPrime_Air.jpg
04-17-2010, 08:35 PM
sofos1990

Nice :D
04-23-2010, 10:13 AM
Mad222

Hey sofos
Check out our new toy:D
http://i967.photobucket.com/albums/a...345/NewToy.jpg

Quote:

Originally Posted by sofos1990

Nice :D
04-23-2010, 10:45 AM
japamd

Holy cow !! Can you tell us the batch of this retail? :D
04-24-2010, 11:32 PM
Mad222

Fyi
3003B466

Quote:

Originally Posted by japamd

holy cow !! Can you tell us the batch of this retail? :d