Ok AMD Geniuses, need your help

Printable View

Show 100 post(s) from this thread on one page

03-30-2010, 04:49 PM
Movieman

Ok AMD Geniuses, need your help

Where does one find heatsinks for 12 core magny cour cpu's?
I need two..:D
03-30-2010, 04:55 PM
Movieman

hey, 6 mins and no reply..
You guys are slipping!:rofl:
03-30-2010, 04:56 PM
richierich

I thought you were so awesome you could construct your own?
03-30-2010, 04:56 PM
richierich

Or how bout a bunch of pennies?
03-30-2010, 04:59 PM
demonkevy666

mounting holes measurement ?
03-30-2010, 05:00 PM
Movieman

Quote:

Originally Posted by richierich

I thought you were so awesome you could construct your own?

Oh now you are just a barrel of laughs today aren't ya?:rofl:

Quote:

Originally Posted by demonkevy666

mounting holes measurement ?

I'd have to have the board for that and not here yet.
03-30-2010, 05:02 PM
demonkevy666

Quote:

Originally Posted by richierich

Or how bout a bunch of pennies?

pennies are a zinc not copper though.

Quote:

Originally Posted by Movieman

Oh now you are just a barrel of laughs today aren't ya?:rofl:

I'd have to have the board for that and not here yet.

I found one.
http://www.acmemicro.com/estore/show...tid=:lastcatid

look the same as socket F :/
03-30-2010, 05:12 PM
wuttz

http://www.dynatron-corp.com/en/prod...spx?cv=1-3-289

from: http://www.amdzone.com/phpbb3/viewto...natron#p179657
03-30-2010, 05:22 PM
Movieman

Quote:

Originally Posted by demonkevy666

pennies are a zinc not copper though.

I found one.
http://www.acmemicro.com/estore/show...tid=:lastcatid

look the same as socket F :/

:shrug: If I have to..:rofl:
03-30-2010, 05:41 PM
perkam

Nice 0_0

I`ve been waiting for this thread !!! :woot: :woot: :woot:

Read this first MM: http://www.xtremesystems.org/forums/...ht=magny-cours

It has OC info too :) And this video goes through what a Magny-Cours rig should look like: http://www.youtube.com/watch?v=tNrBavjByfw

As you will notice, they are using 1200W Thermaltake PSU for two 12-core processors, but you will probably not need more than a good 750 Watter as it is only two of them and their TDP is relatively low, especially the 1.9Ghz ones.

As for PPD, you are looking at about 57K PPD at stock and about 72K PPD at 2.4Ghz.

Perkam
03-30-2010, 06:18 PM
charged3800z24

when ever you find them... we have to see results you know ;)
Keep us posted.:up:
03-30-2010, 06:24 PM
Movieman

Quote:

Originally Posted by perkam

Nice 0_0

I`ve been waiting for this thread !!! :woot: :woot: :woot:

Read this first MM: http://www.xtremesystems.org/forums/...ht=magny-cours

It has OC info too :) And this video goes through what a Magny-Cours rig should look like: http://www.youtube.com/watch?v=tNrBavjByfw

As you will notice, they are using 1200W Thermaltake PSU for two 12-core processors, but you will probably not need more than a good 750 Watter as it is only two of them and their TDP is relatively low, especially the 1.9Ghz ones.

As for PPD, you are looking at about 57K PPD at stock and about 72K PPD at 2.4Ghz.

Perkam

I have a 750w PCP+C for them, waiting on a board, have up to 18-1 gig DDR3-1333 ECC REG available for it if needed, just need to buy HS..
Case,drives,ect are here.
03-30-2010, 06:34 PM
cirons

Quote:

Originally Posted by Movieman

I have a 750w PCP+C for them, waiting on a board, have up to 18-1 gig DDR3-1333 ECC REG available for it if needed, just need to buy HS..
Case,drives,ect are here.

Where did you get your motherboard MM? i've been waiting patiently for newegg to pop up some g34 boards but they dont' have any yet. They do have the 6172 though :)
03-30-2010, 06:42 PM
perkam

Quote:

Originally Posted by Movieman

I have a 750w PCP+C for them, waiting on a board, have up to 18-1 gig DDR3-1333 ECC REG available for it if needed, just need to buy HS..
Case,drives,ect are here.

kk. Each processor has Quad memory channels, meaning it will require at least 4 dimms per processor, meaning you will need to use a minimum of 8 DIMMs for the entire rig or 16 DIMMS (8 in each one) as maximum as you cannot use 9 (it has to be in multiples of two).

For HSF, Dynatron is currently the only one with released AMD G34 Socket Heatsinks: http://www.dynatron-corp.com/en/prod...st.aspx?cv=1-3

Here are a few on sale:

http://www.ncix.com/products/index.p...cture=DYNATRON
http://www.acmemicro.com/estore/show...tid=:lastcatid

@Cirons...MM is not like us mortal men, he is not limited by trivial issues like Newegg availability :rofl: :rotf:

Perkam
03-30-2010, 07:08 PM
Movieman

Quote:

Originally Posted by perkam

kk. Each processor has Quad memory channels, meaning it will require at least 4 dimms per processor, meaning you will need to use a minimum of 8 DIMMs for the entire rig or 16 DIMMS (8 in each one) as maximum as you cannot use 9 (it has to be in multiples of two).

For HSF, Dynatron is currently the only one with released AMD G34 Socket Heatsinks: http://www.dynatron-corp.com/en/prod...st.aspx?cv=1-3

Here are a few on sale:

http://www.ncix.com/products/index.p...cture=DYNATRON
http://www.acmemicro.com/estore/show...tid=:lastcatid

@Cirons...MM is not like us mortal men, he is not limited by trivial issues like Newegg availability :rofl: :rotf:

Perkam

O)k, I like that dynatron A6:
http://www.dynatron-corp.com/en/prod...-3&id=214&in=0
Same design as the Dynatron H46G that I modded to take 80mm Vantec tornadoes. 77x77mm, easy mod and the Vantecs cool my Harpers at 3750 so they should easily cool the MC's..
Board is a different thing, I emailed the manufacturer for one.:D
03-30-2010, 07:40 PM
perkam

Quote:

Originally Posted by Movieman

O)k, I like that dynatron A6:
http://www.dynatron-corp.com/en/prod...-3&id=214&in=0
Same design as the Dynatron H46G that I modded to take 80mm Vantec tornadoes. 77x77mm, easy mod and the Vantecs cool my Harpers at 3750 so they should easily cool the MC's..
Board is a different thing, I emailed the manufacturer for one.:D

I tried looking for the A6 MM, but couldnt find any.

There might be some out by the time you get your board, but right now it looks like you will have to stick with the A5s :S

Here is an alternative to the A5 that seems to have a thicker copper base: http://cooljagusa.com/productshow.asp?id=232 but you will have to call them for availability.

Perkam
03-30-2010, 07:48 PM
Movieman

Quote:

Originally Posted by perkam

I tried looking for the A6 MM, but couldnt find any.

There might be some out by the time you get your board, but right now it looks like you will have to stick with the A5s :S

Here is an alternative to the A5 that seems to have a thicker copper base: http://cooljagusa.com/productshow.asp?id=232 but you will have to call them for availability.

Perkam

I don't mess around my friend.
E mailed Dynatron sales dept 5 mins ago and asked if I could purchase direct from them. I bought from them 3 years ago straight from the office..:D
03-30-2010, 08:31 PM
cirons

Quote:

Originally Posted by perkam

kk. Each processor has Quad memory channels, meaning it will require at least 4 dimms per processor, meaning you will need to use a minimum of 8 DIMMs for the entire rig or 16 DIMMS (8 in each one) as maximum as you cannot use 9 (it has to be in multiples of two).

For HSF, Dynatron is currently the only one with released AMD G34 Socket Heatsinks: http://www.dynatron-corp.com/en/prod...st.aspx?cv=1-3

Here are a few on sale:

http://www.ncix.com/products/index.p...cture=DYNATRON
http://www.acmemicro.com/estore/show...tid=:lastcatid

@Cirons...MM is not like us mortal men, he is not limited by trivial issues like Newegg availability :rofl: :rotf:

Perkam

haha, well guess i'll just have to live vicariously through his build.
03-30-2010, 08:48 PM
perkam

Quote:

Originally Posted by Movieman

I don't mess around my friend.
E mailed Dynatron sales dept 5 mins ago and asked if I could purchase direct from them. I bought from them 3 years ago straight from the office..:D

It looks like I needed to heed my own words :p:

I am sure you will have them...in the next six minutes :ROTF: :rofl:

Perkam
03-30-2010, 09:22 PM
richierich

Almost 5 hours and no results.
MM, you are slipping :rofl:
03-30-2010, 09:26 PM
Movieman

Quote:

Originally Posted by richierich

Almost 5 hours and no results.
MM, you are slipping :rofl:

I did say the cpu's arrived today but no board yet..;)
03-30-2010, 09:46 PM
chew*

Bleh you got away with no Xtreme cooling on the gainestown's........I have a plan this time though :fact:

:hrhr:
03-30-2010, 09:49 PM
Movieman

Quote:

Originally Posted by chew*

Bleh you got away with no Xtreme cooling on the gainestown's........I have a plan this time though :fact:

:hrhr:

Runs,hides,locks doors and then decides to just up and move to Pago-Pago!:rofl:
03-30-2010, 10:43 PM
chew*

Quote:

Originally Posted by Movieman

Runs,hides,locks doors and then decides to just up and move to Pago-Pago!:rofl:

Googlemaps ftw.......you can run but you can't hide.

http://www.google.com/mapdata?CxVeHS...JBU5ABA8oBAmVu

:hrhr:
03-30-2010, 10:48 PM
Movieman

1 Attachment(s)

Quote:

Originally Posted by chew*

Googlemaps ftw.......you can run but you can't hide.

:hrhr:

Crap, but you forget this is New Hampshire where the motto is :
Live Free or Die!

I'll have to get the neighbors kid to set a trap for you!:rofl:

Show 100 post(s) from this thread on one page