266 MHz NF2 Dual Channel Done !!! 4100MB / Sec !!!

After several BIOS modify and timing fine tuning , finally break 4100MB/sec barrier ...

Configuration :

Barton 3200+ @ 266 * 10 @ 2.0V
ChipSet Voltage @ 1.7V
Memory Voltage @ 3.3V
AGP Voltage @ 1.5V
ATI R9800 PRO @ default clock
A-DATA Winbond BH5 Single Side 256MB * 2
DRAM Timing and Driving :
11-2-2-2-2-9-12-Enable-Enable-Fast
Auto-Auto-Auto-Auto-Auto-Auto

Note : CPU is watercooled and an extra FAN for PWM airflaw is a must because there is no CPU FAN air flaw to the PWM when you using Liquid Cooling or Vapor Phase Change Cooling

Here is the picture ...

http://myweb.hinet.net/home8/oskarwu/266-4100.jpg

Just FYI ~~~

GOOD LORD!

what motherboard is that... NF7?

what bios mods did you do and how did you do it?

how is that with only 1.7v VDD ?

Wow! Great score!!!! :D
What bios modifies? :D

This must be DFI :D Lan or infinity. Great job indeed :toast:

Highest Sandrable Score , 3D Mark 2001 fail immediately ...

http://myweb.hinet.net/home8/oskarwu/268-4161.jpg

Ps : For user who use the same board as me , a beta bios will be available soon , besides breaking 260mhz limitation , the new beta bios also bring back the lost bandwidth when the FSB > 200 MHz and multiplier lower than 10X ...

OSKAR, Are you gonna have a NEW BETA bios???
NEWER then the one you did 260x10 with last week??

For Infinity and LP??

Quote:

---

Originally posted by OSKAR_WU
After several BIOS modify and timing fine tuning , finally break 4100MB/sec barrier ...

Configuration :

Barton 3200+ @ 266 * 10 @ 2.0V
ChipSet Voltage @ 1.7V
Memory Voltage @ 3.3V
AGP Voltage @ 1.5V
ATI R9800 PRO @ default clock
A-DATA Winbond BH5 Single Side 256MB * 2
DRAM Timing and Driving :
11-2-2-2-2-9-12-Enable-Enable-Fast
Auto-Auto-Auto-Auto-Auto-Auto

Note : CPU is watercooled and an extra FAN for PWM airflaw is a must because there is no CPU FAN air flaw to the PWM when you using Liquid Cooling or Vapor Phase Change Cooling

Here is the picture ...

[IMG]<snip>[/IMG]

Just FYI ~~~

---

If that is bootable..... Very well done.

Can you say exactly which board this is?????

Most definitely should be DFI. Se the LP thread. Poster's name is on the beta bios links. So that also explains the q about 'bios modifies.'

Not only that but look at his listed memory timings. haven't seen a board with that many other than DFI for NF2's.

My inifinity will be here thursday. I also had an AN7 that I believe disliked my BH5's. So these results are two fold kicka$$ for me to see.

Oscar... are these the same beta bios being directed to by DFI? I didnt see your name mentioned on previous beta bios postings but now I been seeing it. Just wondering if you are at all affiliated or sponsored by DFI.

Great Job on everything. I'm hoping for the 230 range with crossed fingers.

edit: whoa lots of posts got in while I was writing mine. Old news and such.... :toast:

its an infinity or lanparty. the 3.3vdimm is teh giveway.

its new beta bios is doing amazing things.

the question is wheather its a LP or finity.


yeah.. this would be a world record.. beating xDuck!!!:slobber:


mine will be here friday.. cant wait. i just got new bh5 so now i got two sets to test.... :D

This must be the NF2 bandwidth record?

Nice results there!!! Me wants the DFI Infinity NFII Ultra so bad after having 2 POS Abit AN7s :D

Is this the board???????????????? :slobber: :slobber:

DFI NFII ULTRA INFINITY Rev A

http://www.cpucitystore.co.uk/catalo...roducts_id=352

http://www.cpucitystore.co.uk/catalo...s/nf2ultra.jpg

/me thinks about swapping NF7 :slobber:

this is both the fsb AND mem bandwidth record..

!!!!!!

Stable 1:1 FSB yes ;)

I've seen higher FSB clocks, just not 1:1 and/or stable.

Quote:

---

Originally posted by ricjax99
Is this the board???????????????? :slobber: :slobber:

DFI NFII ULTRA INFINITY Rev A

http://www.cpucitystore.co.uk/catalo...roducts_id=352

http://www.cpucitystore.co.uk/catalo...s/nf2ultra.jpg

/me thinks about swapping NF7 :slobber:

---

Yes, either that board or the Rev B Lan Party.

Quote:

---

Originally posted by Walrusbonzo
Yes, either that board or the Rev B Lan Party.

---

Mint!!!!!!!!!!! :toast:

So is 3.3v vdimm bios selectable?? and whats the max vcore? :slobber:

Thanks for replying :toast:

VDimm upto 3.3v
VChipset upto 1.9v
VCore upto 2v

All BIOS selectable.

Quote:

---

Originally posted by Walrusbonzo
VDimm upto 3.3v
VChipset upto 1.9v
VCore upto 2v

All BIOS selectable.

---

Dammit, i knew part of it would let me down :bsod: , i need at least 2.06 to keep this CPU bench stable over 2.4 GHz :( :(

Gutted, was going give dave (the guy at the linked shop) see if i could do a swap and some money dammit. :(

Thanks for the reply tho matey :toast:

When they going to make a board thats vcore > 2.3v, vdimm > 3.4v and vdd > 2v. Surely its not that hard for them to figure that lol :D

You ask too much.... Seriously though, I know what you mean, 2v ain't enough to run my 1700+ at 2.8GHz in my Prommie.

heh, heh, heh.... new bios and a UNlocked Barton... all in the same week.

Gotta get better NB & SB cooling.

Quote:

---

Originally posted by clockedOut
heh, heh, heh.... new bios and a UNlocked Barton... all in the same week.

Gotta get better NB & SB cooling.

---

Nice :banana:

Y'know the digital sound connections on the DFI Infinity, are they optical or coaxial RCA plugs? :idea:

Quote:

---

Originally posted by ricjax99
Nice :banana:

Y'know the digital sound connections on the DFI Infinity, are they optical or coaxial RCA plugs? :idea:

---

:eek: Ummmmm, The Infinity has sound?? :stick:

Optical :D

Quote:

---

Originally posted by clockedOut
:eek: Ummmmm, The Infinity has sound?? :stick:

Optical :D

---

Mint, my home theatre system only has optial inputs, may have to see if i can give one of these babys a try :banana:

You sure they are Optical? They looked Coaxial to me.

LOL, Maybe, I dont know.. ... I dont even have speakers plugged in...

Description from NewEgg
- 1 PS/2 mouse port
- 1 PS/2 keyboard port
- 1 DB-9 serial port
- 1 DB-25 parallel port
- 4 USB 2.0/1.1 ports
- 1 RJ45 LAN port
- 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
- 3 audio jacks: line-out, line-in and mic-in
- 2 audio jacks for center/bass and rear out

wow 266fsb is amazing! any idea what fsb the average nf7-s 2.0 does?