371MHz fsb on an ABIT IC7-G.....NOT BAD(again).... :)

Yeap.........371MHz fsb on an ABIT IC7-G Mobo....... :D :banana:

.....AND I think I'm about to "solve" the 5:4 and the 3:2 ratio problem on this Mobo........I'll know one of these days..... ;)


ALL these are ON AIR on Northbridge with a Thermaltake Tiger heatsink........I'll put a Peltier on it one of these days and I think that I'll "break" the world record which is 378MHz IF I remember well.......


Anyways ........Show is on.......... :D

Clock gen............Take a look at AGP/PCI.......You CAN'T go high if you have SATA HDD's on INTEL's southbridge chipset and locked AGP/PCI at 66/33MHz........NO WAY.......

S-Sandra Memory bench with high fsb and 3:2 ratio........

Congrats, Very nice results man :D

.......and my new pi-fast on this Mobo........

ABIT IC7-G
Modded Prommie with R507 gas
2 x 256MB Kingston Value Rams PC2700(DDR333) with BH6 chips on board

I can bench at 305MHz fsb with the 5:4 ratio till now and STILL moving on.........I think one of these days I'll found out why those ABIT's can't go higher than 280 - 290MHz average fsb's with the 5:4 ratio.......I'll post the "findings"..........I'll borrow a digicam from a friend of mine one of these days(haven't bought one of mine yet)....... :D

Damn, just got a headache. 371MHz FSB ? What's holding you back ?

Quote:

---

Originally posted by hipro5
I can bench at 305MHz fsb with the 5:4 ratio till now and STILL moving on.........I think one of these days I'll found out why those ABIT's can't go higher than 280 - 290MHz average fsb's with the 5:4 ratio.......I'll post the "findings"..........I'll borrow a digicam from a friend of mine one of these days(haven't bought one of mine yet)....... :D

---

Hurry up hipro, solution is badly needed.

http://www.xtremesystems.org/forums/...&postid=296609

Awesome my Friend :slobber: :toast:

Is your P4 an engineering sample?

Quote:

---

Originally posted by NapalmV5
Damn, just got a headache. 371MHz FSB ? What's holding you back ?

---

Thanks guys........ :toast:

I thing the memory controler is holding me back for the time been...... ;)

Quote:

---

Originally posted by spaceboy
http://www.xtremesystems.org/forums/...&postid=296609

Awesome my Friend :slobber: :toast:

---

Thanks a LOT M8........ :toast:

Quote:

---

Originally posted by SPQQKY
Is your P4 an engineering sample?

---

Yes it is.......On ABIT I can use the x8 - x12 - x13 - x14 - x15 - x16..........On an ASUS and EPOX I can NOT use the x8 multi...... ;)

Quote:

---

Originally posted by NapalmV5
Hurry up hipro, solution is badly needed.

---

I'm trying about a month now........ ;)

Amazing scores, hipro5. :toast:
Hope you'll break the record.

Now we know why you've been so quiet over the past weeks. :D

You crazy scientist:):)
Now you must find a good card and play with
AND find the 5/4 problem cause promie is on the way....
good job again as usual:)

Quote:

---

Originally posted by Jupiler
Amazing scores, hipro5. :toast:
Hope you'll break the record.

Now we know why you've been so quiet over the past weeks. :D

---

Thanks Jupiler........I was "quiet" over the past weeks not only for this but cos I'm very busy with my work too..... ;) :D

Insane. Incredible. :bows:
Fark! :bounces: Nice one Hipro!!


Go the bold! :D

Quote:

---

Originally posted by shidokanjohn
You crazy scientist:):)
Now you must find a good card and play with
AND find the 5/4 problem cause promie is on the way....
good job again as usual:)

---

I'm trying my friend......... ;) :D

oh insane and even at 3:2 at such high fsb youd need good ram that can handle the speed

Quote:

---

Originally posted by MCWB
Insane. Incredible. :bows:
Fark! :bounces: Nice one Hipro!!


Go the bold! :D

---

Thanks M8.......Always bold........ :D :toast:

Quote:

---

Originally posted by Geforce4ti4200
oh insane and even at 3:2 at such high fsb youd need good ram that can handle the speed

---

Fortunately I've got GOOD Ram to handle the fsb......At 1:1 I'm at 263MHz maxed out....... ;)

Wow, killer bandwith. Are you going to extreme mod the board to reach higher fsb? :D

Good job hipro5 :D

Once again good job Hipro5 , keep on modding the abit , and like a friend of mine said Always be careful !!!!!

Quote:

---

Originally posted by JiMk
Good job hipro5 :D

---

Καλα μιλαμε εαν εισαι και εσυ εδω τοτε αστα να πανε....αλλα βλεπω μονο 6 ποστ , τσπ και ελεγα γιατι ειχα φαγουρα πρωι πρωι στο δεξι και κατι .....