Printable View
Well this is all I can squeeze out of this combination...
vcore=1.95, vdimm=3.3, vdd=1.9, agp=1.7
timings= 11-2-2-2-2-9-12, enabled, enabled, fast
cpu interface=aggressive
http://www.creaseyprinting.com/scree...x10SuperPI.gif
http://www.creaseyprinting.com/scree...x10SandMem.gif
http://www.creaseyprinting.com/scree...ndCPUArith.gif
http://www.creaseyprinting.com/screens/250x103DMark.gif
Sorry for the large images....
:banana: :banana: :banana: :banana:
I am very happy with this set up!!!
really a good achievement m8! Just a couple of questions:
1) Is vdd 1.9v stable? I noticed on my board that going over 1.7v makes things act worse.
2) Is your ram single or double sided?
3) Does ddr slot3 (the one on the right side of the mobo) overclock less than slot 1&2?
Very Nice:)
Thanx....Quote:
Originally posted by Iolao
really a good achievement m8! Just a couple of questions:
1) Is vdd 1.9v stable? I noticed on my board that going over 1.7v makes things act worse.
2) Is your ram single or double sided?
3) Does ddr slot3 (the one on the right side of the mobo) overclock less than slot 1&2?
1) It seems to need all the vdd
2) Double sided (I think) it is OCZ PC3200 rev2, bought Jan03
3) Not sure... I did all this dual channel slots 2 & 3
Have you some sort of cooling on the mosfets? If you have spare time can you test a single stick in all three slots?Quote:
Originally posted by clockedOut
Thanx....
1) It seems to need all the vdd
2) Double sided (I think) it is OCZ PC3200 rev2, bought Jan03
3) Not sure... I did all this dual channel slots 2 & 3
Stock cooling on the mobo.
I did try single stick with my locked Barton... but it didnt make any difference... I was maxed out on the CPU at 225x11.
I will try moving single sticks around later.
Very nice, and certainly very intriguing as we've seen such mixed results from this board and the LPB.
Was 250fsb prime stable ? Where did you get the board as Im looking for a replacement for my 8rda+ and the abit boards dont seem to be doing so well right now.
Wow not too bad!
GRRRRR hurry up excaliber!! I WANT MY INFINITY!!
No, 250x10 is NOT Prime stable.... I have to back off to 245x10 to get Prime stable at same volts.
I bought it from NewEgg 2 weeks ago.
very nice clockedout excellent job Im gonna be ordering one of these board sometime this week for me and a friend.
Very nice ;)
This will be my next mobo for sure
:banana: I like this mobo!!! :banana:
I still think it has voltage regulation issues.
And I wish it would let me use vcore past 1.95 or didnt undervolt.
If I could combine the stability of my Soltek 75FRN2-L with the votage options of this Infinity... it would be the perfect clocker for me. :D
It sounds like anice board but no way no how can I live with 1.95 Vcore. I just couldn't do it. Even 2v even is no good for me. I want and need at least 2.1 v
No one has tried a vcore mod for this board?
Does it use the HIP6301 or what?
I am able to bench with 255x10. But I wish I could use these setting 24/7 :(
IMO I need more vdimm... mod anywhere?
Then I am gonna cool my tinies (mosfets) down so that I am able to use more than 1,85VCore w/out reboots...
My cpu could do 242x11,5 stably and I am convinced it still can do it with enough voltage... :)
I put a New UN-locked 2500+ in the Infinity last night and put active cooling on the NB & SB.
Its at home Priming at 245x9.5 to get it warmed up for some testing tonight.
nice.. keep us informed!
HI
HOw about the 10 - 10.5 multipliers ?
They are functional, right ?
Sure... why wouldnt they be??
Hi
Because they arent for those of us with NF7-S's.
I may order one.
Would a Northpole or Swiftech cooler be advisiable for the nb ?
I have Buffalo pc3700 BH5's...and want to really push the fsb.
I put a Vantec Iceburg on the NB & the SB.
Hi
Thats what I have on this Abit. I can just move it over.
The Infinity should be here on Tuesday
So far it feels alittle more stable... but I have not really tested all the new changes yet.
why is it limited to 1.95v
is it a bios issue or vcore regulation/overvolt protection?