Anyone know of a 140.3 template?

I tried searching around and the closest thing I could find were some templates Bill Owen from MNPCTech had, but they were mainly 120mm

I made this crude kind of template in Visio, but I was hoping maybe something a little more professional.

http://i104.photobucket.com/albums/m...3_template.png


Thanks

Quote:

---

Originally Posted by Ketzer7

I tried searching around and the closest thing I could find were some templates Bill Owen from MNPCTech had, but they were mainly 120mm

I made this crude kind of template in Visio, but I was hoping maybe something a little more professional.

Thanks

---

I'll whip up one later in the afternoon for you :)

Bump so others can grab this as well :)

Download 140.3 Template

Nice one, thanks Metric :up: Is that 20mm hole spacing btw?

Quote:

---

Originally Posted by Ketzer7

Nice one, thanks Metric :up: Is that 20mm hole spacing btw?

---

It's 30mm... 125mm hole distance for 140mm fans, correct (15mm + 15mm)?

Edit: I can't do math late at night it seems...fixing...

Ooh, yeah, I guess 140mm fans have holes at 124.5mm, and all of the 140mm based rads I have seen have 20mm spacing between the holes.

I went by this on HW Labs' website to get those measurements, and from WCUK's page about the TC PA140.3, it has the same spacing as well:

http://www.hwlabs.com/images/gtx/d_gtx420.jpg

Quote:

---

Originally Posted by Ketzer7

Ooh, yeah, I guess 140mm fans have holes at 124.5mm, and all of the 140mm based rads I have seen have 20mm spacing between the holes.

I went by this on HW Labs' website to get those measurements, and from WCUK's page about the TC PA140.3, it has the same spacing as well:

---

Thanks for the correction :) (also rechecked my math and was off by a factor of 2 - so the current one has 15mm spacing and not my stated 30mm).

Fixing to 20mm ;)

For confirmation, i just checked my BI SR-1 (140mm variant) and indeed it's 20mm spacing between holes :)

Does PA140.3 has different revisions with different spacing? I've heard about this many times but everytime it looks kinda like rumors, nobody can say "I have 140.3 and there is **mm spacing"

btw mine has 20mm hole spacing
http://img15.imageshack.us/img15/119/img0889u.jpg

Quote:

---

Originally Posted by aka_GK

Does PA140.3 has different revisions with different spacing? I've heard about this many times but everytime it looks kinda like rumors, nobody can say "I have 140.3 and there is **mm spacing"

btw mine has 20mm hole spacing
http://img15.imageshack.us/img15/119/img0889u.jpg

---

Please re-measure, this time from the center of the holes (this is the proper method for measuring holes spacing/patterns.

Quote:

---

Originally Posted by Waterlogged

Please re-measure, this time from the center of the holes (this is the proper method for measuring holes spacing/patterns.

---

sure it is, that's because blade of the tape line is not perfectly flat
http://img7.imageshack.us/img7/5905/img1388l.jpg

Quote:

---

Originally Posted by aka_GK

sure it is, that's because blade of the tape line is not perfectly flat
http://img7.imageshack.us/img7/5905/img1388l.jpg

---

:up:

or you could've checked here... ;)

bump

Metric, did you have any luck fixing your template? Thanks!

Quote:

---

Originally Posted by Ketzer7

bump

Metric, did you have any luck fixing your template? Thanks!

---

Update will come later today :)

Original link has been updated with the new, correct version :toast:

Quote:

---

Originally Posted by Metric

Update will come later today :)

Original link has been updated with the new, correct version :toast:

---

haha :ROTF:

I just came in here about to post something seeing if you had a chance to update it, and then I saw your edit from almost a week ago. :hitself:

Nice, thanks again Metric :up:

Great Thread! Thanks for the measurements! :up: