Printable View
Hi yes that right a new bios for the Destroyer.
a few fixes but sorry no northbridge multiplier this time
next bios will have so keep watching
http://www.ex3clan.com/foxconn/MCP72A01-79CF1G10.zip
list of stuff
1. Update CPU Micro code for CPUID 100F62H.
2. Update NVMM to Ver.4.092.22.
3. Modify BIOS for BTS Ver.6.8.22.
4. Fixed some CPU show wrong CPU ratio.
5. Update VBIOS to Ver.62.77.35.00.00.
6. Update nvraid.rom
1. Update AGESA
plus other fixes but list is to big have fun and enjoy
thanks
Oh snap. nj Carl. I got a few of these floating around. I will try it. Thx.
Thanks for releasing a new bios! I have been holding on to my board for this very reason!Quote:
Originally Posted by Lord Trident
Download does not work for me sadly. Iīm getting some sort of malfunction, "canīt read file" Maybe itīs just be being stupid?
seem the file site got a problem if you tell me of a diffrent one to use i up load to that
thanks
ok try this link
http://rapidshare.com/files/33375771...F1G10.zip.html
hope it works this time
sorry about the other link not sure what went wrong
thx 4 the hope to get the multiplier in the future!
but will try this one too!
thx :clap:
cool this would be awesome:up: i love this boardQuote:
Originally Posted by Lord Trident
TY for the BIOS file. Is this update different from the first G10 linked in the first post ^ there?Quote:
Originally Posted by CobraXP
Anytime. samething file. Lord Trident updated his original post.
http://valid.canardpc.com/show_oc.php?id=949949
965 C3, X2 250, works good for now. Tomorrow I'm going to test new bios, and the 250, hope, 260-300 htt wall is gone, if not air party will by on 260 stable. for now I want show ya guys what I made for hwbot, in 8200 category and with 965. http://img5.imageshack.us/img5/155/scree123123123n.jpg I will back to the throne some day ;) also made 740 run but didn't save it, because score was only ~10 points higer. So I will back
Lord Trident Will there also be a fix for the AHCI problem. So far this beta Bios is a good start. looking forward to next reless. TY
I can hardly wait for NB Multi.:clap:
http://valid.canardpc.com/show_oc.php?id=958853
700 mhz is possible, I'm sure. just please please give us bios with nb multi as fast as it's possible :(
Installed new bios and now cpu clocks to 800Mhz only. WTF? Anybody have this same issue? Any ideas?
I have with the Athlon II X2 250.
I had the same Problem, When Everything is set to default everything is fine but as soon as I touch the HTT (FSB) Frequency and or the Multiplier it Drops the CPU Frequency. After Trying everything to see if I could get it to do anything I Opened up K10stat and it confirmed my thoughts about it resetting the P-states.Quote:
Originally Posted by jbua5150
I went into the Bios and tried changing the pstate's and everything else in there but nothing happend and resulted in the same results.
Htt = P- state change
CPU Multiplier = P-state Change
Any change what so ever resulted in a Pstate change.
When Booting Everything reads as it should but once into Windows is when the Pstate change occurs.
Other than that the Bios installed without any problems and uninstalled with out problems, Thankyou for working on new Bios's for us Destroyer Owners...Hopefully You can fix this issue :)
My setup consists of the following:
Windows 7 32bit
Phenom II 940
2x2Gb Mushkin 1066
ok bug reported should be fix in the next bios
thanks
Is there any particular reason why the BIOS still lacks the option to enable hardware virtualization (also known as AMD-V)?
Not being able to turn that on is seriously killing performance in virtual machines. :(
no idea may have been many reason
as it was not part of the spec at the time
am sure amd-v come in at a later date so it may be possable that nvidia chipset does not support
but i will try to find out and if we can have it in the next bios
but so you know this the first time someone has asked for it
you see, there lots of people who needs new bios.
yes hardware virtualization would be awesome!:shocked:
I'm mostly interested in having a CPU to NB multiplier option in the CMOS settings :shrug:
well later today i will release another bios that fix the min speed problem you having when overclocking
this does not have the other stuff yet they been worked on.
thanks
Quote:
Originally Posted by Leapo
I'm sorry, WHAT??? None of that made any sense!Quote:
Originally Posted by Lord Trident
AMD-V has been on AMD processors since 2006, the Foxconn Destroyer was released in 2008, so it was part of the spec at the time.
My previous motherboard was a Foxconn C51XEM2AA, which had the much older nForce 590 SLI chipset. It supported hardware virtualization just fine, and had an option for it in the BIOS and everything.
AMD-V has been around a long time, previous Foxconn / nForce boards support it, there's no reason it for it to be missing on the Destroyer.
Edit: I see the G12 BIOS has AMD-V support. Guess it was pretty easy to add after all :p: