Water Floodgate Reservoir

Cold Copper ®
"WATER FLOODGATE RESERVOIR"

I present you my new high flow reservoir for be use with my home made *Pump Expansion Chamber (PEC)*. their measures are as follows: 92mm L 100mm H 65mm W. it has two inlets and two outlets for Fittings with ID of 14mm
http://img245.imageshack.us/img245/3954/mdf30.th.jpg http://img199.imageshack.us/img199/6739/mdf27.th.jpg http://img3.imageshack.us/img3/1281/mdf29.th.jpg Hole LED




Fittings with ID of 14mm

http://img43.imageshack.us/img43/7448/mdf31.jpg

http://img10.imageshack.us/img10/151/mdf35.jpg

http://img42.imageshack.us/img42/6299/mdf38.jpg



http://img34.imageshack.us/img34/4690/wfr03.th.jpg http://img17.imageshack.us/img17/8492/wfr04.th.jpg http://img27.imageshack.us/img27/4321/wfr06.th.jpg


http://img5.imageshack.us/img5/563/wfr07.jpg

http://img188.imageshack.us/img188/6573/wfr08.jpg

http://img17.imageshack.us/img17/2535/wfr10.jpg

http://img5.imageshack.us/img5/2980/wfr12.jpg

i give you the link for two videos


with UV light. its final look

http://www.youtube.com/watch?v=dxwjVQZkwCc

Final test performance to 1200 LPH: no BUBBLES. Two inlets of 14mm and two outlets of 14mm.
http://www.youtube.com/watch?v=xInYIrHuY-U


.

Interesting. I will watch the videos later. Nice work!

wow thats eye candy...

WHY is Cyberdruid under a TAG?

Quote:

---

Originally Posted by NaeKuh

wow thats eye candy...
WHY is Cyberdruid under a TAG?

---

in the first video i posted in YOUTUBE http://www.youtube.com/watch?v=ZpJAj1AIpQU
The creativity to make my resoervoir i give credits to CyberDruidPC : "CyberDruidPC creativity helped me create my new reservoir. greetings from Colombia.".
if its a problem should i remove tag?

wow.. love the concept and idea :)

Pretty cool. Nice work.

This is pretty cool. Very original.

+1
unique.

How did you get those "steps" in place. Did you glue them?

Nice, quality work.

Do you find it hard to get fully a watertight res when working in acrylic?

Unique! I like it!

looks very nice!

Quote:

---

Originally Posted by JASSAF

if its a problem should i remove tag?

---

i would think its your original work.

So therefore u should take the credit to yourself.

its a great job... i would see no shame in taking credit for yourself.

Looks cool. Nice work. :up:

Quote:

---

Originally Posted by Tackleberry

unique.

How did you get those "steps" in place. Did you glue them?

---

Quote:

---

Originally Posted by SuperSilent

Nice, quality work.

Do you find it hard to get fully a watertight res when working in acrylic?

---

To achieve a watertight reservoir, the final measures of internal components should be acomplish with a "steady hand" and fine sanding.... its edges must be flat.
in this reservoir i used two angle surfaces. When there is a leak of thousandths... a new cement application will do the job

The steps? thinking about how to control the speed and turbulence of the water..... Two days ago i failed to control the on top water flow in the initial prototipe: :down: :down:
http://img197.imageshack.us/img197/2151/fracaso2.jpg

i Change the setting to control the flow using a bottom floodgate, the configuration of the reservoir is for use with the pump expansion chamber of the homemade bomb...... you know it as Typhoon III. But my design is different. :up:


.

Hello again

I've added a Expansion Chamber to my Water Floodgate Reservoir.
I've only done a preliminary test of preload (increased water entry) and increased by 80 LPH the water flow. In a few days I will put other results.
with 4 outputs......Sorry for the English,I am using a Google translator :p:

http://img109.imageshack.us/img109/3005/tsunami00.jpg

.Fittings with ID of 12mm

http://img682.imageshack.us/img682/6277/tsunami01.jpg

Amazing work, must be lots of fun.

Cold Copper ®
"TSUNAMI"


http://img199.imageshack.us/img199/2450/tsunamis.jpg
These are the inital results of my Tsunami (Floodgate+PEC), the idea is to use only one radiator, the GT240 Stealth would be modified in order to lower his restriction. The ID is going to be of 14.29mm instead of the initial 10mm… within a few days I shall new results with these mods. :p:

http://img15.imageshack.us/img15/2534/loopn.jpg

Tsunami – Setting @12.0V

Single Loop
MCP655™
2.7 PSI ………………..3.05 GPM

Single Loop
MCP655™ + GT240 Stealth + DD MPC DFI Expert + CPU Home made
5.0 PSI ………………..1.06 GPM

CPU Home made: http://img37.imageshack.us/img37/9853/1plat00.jpg


Dual Loop A
Tsunami + MCP655™ + DD MPC DFI Expert + Tsunami
3.7 PSI ………………..1.15 GPM

Dual Loop B
Tsunami + MCP655™ + GT240 Stealth + CPU Home made + Tsunami
3.4 PSI ………………..1.10 GPM


System Flow Rates Comparison:

Single Loop 1.06 GPM
Dual Loop 2.25 GPM

http://img15.imageshack.us/img15/2856/loop00.jpg

:up:

hmmm could you draw a nice arrow guideline of the water flow ... sorry i cant seems to figure it out ...
i couldnt see from the pics

btw .. nice work you got there

Quote:

---

Originally Posted by Serpentarius

hmmm could you draw a nice arrow guideline of the water flow ... sorry i cant seems to figure it out ...
i couldnt see from the pics

btw .. nice work you got there

---

i hope that with these new pic you can see better the loop A and B

ColdCopper ®
"TSUNAMI"

My proyect "Case on MDF" with the system working.

http://img33.imageshack.us/img33/9049/casemdf.jpg

Some pics of "Tsunami".
http://img96.imageshack.us/img96/9971/tsunami03.th.jpg http://img32.imageshack.us/img32/6277/tsunami01.th.jpg http://img192.imageshack.us/img192/5...unami02.th.jpg


A short clip from the system: http://www.youtube.com/watch?v=FHXirUEkcJM


there is only working one loop....The GT240 Stealth is very restrictive, thats why im building a radiator 3x120mm High Performance .. If i have the time it will have a integrated vertical and horizontal reservoir. :up:

http://img96.imageshack.us/img96/586/rad11.jpg

http://img683.imageshack.us/img683/4209/rad09.th.jpg :clap:


.

Super nice reservoir, it's not the colors I would have pick but nice none the less

TRIPLE RADIATOR (acrylic cover)

i´ll translate later

mike0yurry: http://www.xtremesystems.org/forums/...&postcount=614:
http://img704.imageshack.us/img704/9454/radmod.jpg


Specifications

Aluminum: body, tubes and fins
2-pass, single row construction
16 single row: (24mm x 1.3mm)
15 FPI
acrylic Water Chambers (two compact block)
1 output: 14.6mm ID
2-3 or 4 inlet: G1/4 (10mm ID)


http://img685.imageshack.us/img685/2029/rad00.th.jpg http://img695.imageshack.us/img695/6708/rad02.th.jpg http://img690.imageshack.us/img690/9230/rad05.th.jpg http://img80.imageshack.us/img80/5127/rad04.th.jpg cuts

http://img23.imageshack.us/img23/6914/rad03.th.jpg single row: 16 (24mm x 1.3mm)


http://img442.imageshack.us/img442/571/rad06.jpg



http://img222.imageshack.us/img222/6178/rad08.th.jpg

http://img96.imageshack.us/img96/586/rad11.jpg

http://img695.imageshack.us/img695/5482/rad13.jpg


http://img682.imageshack.us/img682/5222/rad14.th.jpg http://img697.imageshack.us/img697/4562/rad15.th.jpg http://img96.imageshack.us/img96/8434/rad16.th.jpg

http://img697.imageshack.us/img697/4664/rad17.jpg

1 output: 14.6mm ID
2-3 or 4 inlet: G1/4 (10mm ID)


http://img693.imageshack.us/img693/4286/rad18.th.jpg http://img638.imageshack.us/img638/8307/rad19.th.jpg http://img402.imageshack.us/img402/8108/rad20.th.jpg http://img21.imageshack.us/img21/7373/rad21.th.jpg

Acrylic Water Chambers (two compact block)


http://img718.imageshack.us/img718/1114/rad22.jpg



.

pretty sick... can't wait to see that rad fully done! keep it up.

That is a beatiful radiator! Pretty interesting idea integrating the reservoir and the rad together.

TRIPLE RADIATOR (acrylic cover) Part II.
almost finished


Soldering:

http://img340.imageshack.us/img340/7843/rad33.th.jpg Before and .... http://img413.imageshack.us/img413/2808/rad33a.th.jpg After.



Radiator Panel:
http://img85.imageshack.us/img85/9556/rad34.jpg



Barb I.D. 14.6 mm .....Nickel Plating:

http://img517.imageshack.us/img517/9145/rad37b.th.jpg http://img413.imageshack.us/img413/16/rad37c.th.jpg http://img517.imageshack.us/img517/4334/rad37e.th.jpg...look final:

http://img338.imageshack.us/img338/1402/rad39.jpg



Assembling a Water Chambers
http://img684.imageshack.us/img684/4328/rad42.jpg


Water Test: passed :up:

http://img27.imageshack.us/img27/6267/rad44.th.jpg http://img340.imageshack.us/img340/5850/rad45.th.jpg



A short videoclip

http://www.youtube.com/watch?v=3XgZ5srDZjo





.