Lian Li A05NB - Nuclear Poison - now in english :D

This project ist sponsored by Aquatuning and Phobya

Thank you very much! :)

http://www.abload.de/img/aquatuninglogomaxdvof.png http://www.abload.de/img/phobyalogopkq8.jpg

http://www.abload.de/img/aquatuningaynj.gif http://www.abload.de/img/phobya_468x60vz5y.gif

Hello guys

I decided to also start my Project in the xtremesyystems forum
It would be a lot work for me as an 16 year old guy to translate everything but i think the pictures are better than noting?! I hope so :p:

When you have questions about the pictures or the project just ask me
I will explain everything!

I hope you enjoy it :)

First sorry for my english :D

I will say a little bit about the project:
At the last lan party I decided to buy a much smaller case than the V2010b
So i bought a Lian Li A05NB

Hardware:

EVGA X58 SLI LE
GTX300 when it will be released
6 GB Corsair Dominator Ram

The Case will get a mirrorfinish (chrom) ;)



The Rise of the A05NB :D

http://www.abload.de/img/dsc02194q7ji.jpg

http://www.abload.de/img/dsc02197bk0m.jpg

http://www.abload.de/img/dsc02202mva8.jpg

The Midgard is for a friend's PC ;)




At first I carried the case into the cellar and removed the outer hull

http://www.abload.de/img/dsc02203f5c1.jpg


Next I removed the gray plastic holders for the DVD burner
I like the oldskool way with screws

http://www.abload.de/img/dsc0220531hx.jpg


Here you can see how i will mount the reservoir ;) (Danger Den)

http://www.abload.de/img/dsc02207a0sb.jpg


Now i removed the HDD cage
The most time i think they are useless :D
The HDD will be placed in a Watercool Silentstar with mirrorfinish

http://www.abload.de/img/dsc02212x26q.jpg


I could notive that the painting is not really scratchproofed
This makes it easier for me to remove the painting for the mirror finish

http://www.abload.de/img/dsc02214w1c9.jpg


Here the total view
What a cute, black case :D

http://www.abload.de/img/dsc02216e3ma.jpg

The ugly, black feets were a no go
They had to dissapear very fast :D
To remove them i had to push the bolts out and voilá
So the barbs were not widened any more

http://www.abload.de/img/dsc02220a2gp.jpg

I knew it
The feets I bought from fhantastic from the forumdeluxx will get there place

http://www.abload.de/img/dsc02224q2qj.jpg

Now the mounting
Because i had no plier near by me i had to stop and go to dinner :)
Will be continued later

http://www.abload.de/img/dsc0222533mb.jpg


And it goes on

At first i fetched my friend the clue remover :D

http://www.abload.de/img/dsc0222856dg.jpg


And that's the place of action

http://www.abload.de/img/dsc02231y614.jpg

At first I removed the cables and with soft vielence the plastic holder
Now i sprayed clue remover on it

http://www.abload.de/img/dsc02234y6qh.jpg


Now the Power Supply
It's a Silverstone Strider 700W Full Modular


http://www.abload.de/img/dsc0223816mz.jpg


At first i removed the hull and this was brought to light

http://www.abload.de/img/dsc02240r6wu.jpg


I removed the the fan to get an overview
For this i had to remove the fan connector

http://www.abload.de/img/dsc02244i6gz.jpg


The earthing...

http://www.abload.de/img/dsc02247061p.jpg


And so the power supply board lookes like

http://www.abload.de/img/dsc02250h673.jpg


To not damage the power supply in any way I put it into a box

http://www.abload.de/img/dsc02251x6kb.jpg


The parts where i had to remove the painting

http://www.abload.de/img/dsc02252z6fe.jpg


Now the fan
The sticker looks terrible

http://www.abload.de/img/dsc02257z6wg.jpg

It had to die :D

http://www.abload.de/img/dsc0226096fh.jpg


Here I think i will drill some holes into the case for the ?"Through Hole"? Fittings

http://www.abload.de/img/dsc02263t6cs.jpg


That was it for today
At least picture from my workshop :D

http://www.abload.de/img/dsc0226106sh.jpg

Thankfully pictures are universal. Although... i'm kinda lost at whats going on haha.

Quote:

---

Originally Posted by Armitage

Thankfully pictures are universal. Although... i'm kinda lost at whats going on haha.

---

+1 lol

Hmmm ok guys

I will translate the worklog and continue in english
Should not be be impossible :D

I also think that pictures without an explanation are a little bit confusing

Thanks for the translation, alpha! Nice photos, and great progress so far.

wow. Really nice!

Realy nice project you have there, waiting for some more stuff and pics ;):up:

A05~ its been a while since I last saw one
should be an interesting build~

Swt same case and Mobo as me!!
Good Luck with your system.

At first i take look at the though hole fittings
And i had to notice that it will not fit how i thought
And when i would have to use SLI fittings :/

http://www.abload.de/img/dsc022686pny.jpg


After that i marked the cutout
So I can change the CPU cooler much faster
But... I don't know if the hole is big enough for 1366

http://www.abload.de/img/dsc022747ooj.jpg


Now i mounted my old, broken 775 MB
So I can imagine everything much better

http://www.abload.de/img/dsc02283ys9m.jpg


Then I marked verticalness for the trough hole fittings
So later the Tygon from the EK GPU block to the fitting will be exactly vertical

http://www.abload.de/img/dsc02286lpfh.jpg

http://www.abload.de/img/dsc02290brib.jpg


And here my favourite tool :D

http://www.abload.de/img/dsc02293coxh.jpg

Now i want to try the polishing attachment
Before the chroming everything shall be shiny
The HDD Cage was my guinea pig :D

http://www.abload.de/img/dsc02295tpvz.jpg

http://www.abload.de/img/dsc02296wpmj.jpg

http://www.abload.de/img/dsc02297rpie.jpg

http://www.abload.de/img/dsc02298kpxy.jpg


That was not enough so again...

http://www.abload.de/img/dsc023036pl7.jpg

Now let's take a look under the surface ;)

http://www.abload.de/img/dsc02304qooi.jpg

ahh
http://www.abload.de/img/boratverynicekvjf.jpg

When the hole case is polished i can send it to the chrome-man :D


And here i will mount the Laing DDC (yes^^ no D5 :D for american maybe this is unbelievable, my poor ears :P )

http://www.abload.de/img/dsc02310wpto.jpg


edit:

to abviate questions about my hand!
no, i don't have child hands! :D
Only looks like because of the pullover :D

http://www.abload.de/img/dsc02314vszi.jpg

interesting, subd ;)

lol about the hand, i was almost planning to say something about it but then i scrolled a bit further down and you cleared it up.
BTW nice case, gonna buy it soon myself but no WC for me.

In English ey? Niiice =)

Shall i mount into the front an enermax apollish or an aerocool silver lightning?

And I hope my english is not too bad and good to understand
Isn't it?^^

The apollish i guess

Awaiting ur updates :)

How you can see, i have a new signature and avatar which fit to the project ;)
I hope you like it
Normally the avatar is animated but no chance... not possible to use .gif datas :(


Here is my polished flow meter

http://www.abload.de/img/dsc02318utd1.jpg

http://www.abload.de/img/dsc02335jq8w.jpg

http://www.abload.de/img/dsc02337rqx8.jpg


Today the post came and brought me some things

- Silenstar -

http://www.abload.de/img/dsc02352qqnd.jpg


http://www.abload.de/img/dsc02364qpbr.jpg


and a few things like XSPC Laing Reservoir, Alphacool Cool Cover silver and Backplate
But the XSPC i will not use
I will change to EK 150cm and the old Watercool Top for Laing
How I will mount it you see when time comes ;)

Up to now i was shopping in the ?do it yourself store?

http://www.abload.de/img/dsc02425lenq.jpg

http://www.abload.de/img/dsc024298gdo.jpg

http://www.abload.de/img/dsc02426dcwn.jpg

http://www.abload.de/img/dsc02427vcd1.jpg

The Metabo is breathtaking *__*
With 2 gears, all kinds of features and built in flashlight :bigok:
That's no compare to a normal cordless screwdriver

Great work 1337_alpha

Thank you Aaron

I hope my Mips Ram Cooler is comin' soon ( i exptect at monday)

Hardware will be ordered when the case is back from chroming

nice tools :)
did you polished flowmeter by yourself?

Quote:

---

Originally Posted by aka_GK

nice tools :)
did you polished flowmeter by yourself?

---

Of course ;)
Withe the Dremel ;)

Really enjoying watching your progress here :up:

Thanks at supercopa from the forumdeluxx
Barus from PL will sell me an acrylic top for the Mips Ram Cooler and one for the EK EVGA X58 SLI LE block
Surprisingly barus' family lives in Karlsruhe, where I live :eek2
In November he will visit them so he can give me them personally :worship:


http://www.abload.de/img/dsc02438eqs1.jpg

http://www.abload.de/img/dsc024440svd.jpg

Here are a few new things :)

http://www.abload.de/img/dsc02528lv5z.jpg

http://www.abload.de/img/dsc02560e4ek.jpg

From the Enermax Cyberspace...

http://www.abload.de/img/dsc0253412fz.jpg

http://www.abload.de/img/ekszyj.jpg

http://www.abload.de/img/dsc02586spin.jpg

http://www.abload.de/img/dsc02588wrax.jpg

http://www.abload.de/img/dsc02589sp58.jpg

http://www.abload.de/img/dsc02592lp3c.jpg

http://www.abload.de/img/dsc02597jpkm.jpg

http://www.abload.de/img/dsc02598dr9y.jpg

http://www.abload.de/img/dsc02601eshq.jpg

http://www.abload.de/img/bestofpbhz.jpg

http://www.abload.de/img/dsc02608woz9.jpg

http://www.abload.de/img/dsc02609vp64.jpg

Sweet build looking forward on seeing the rest.. :yepp: And that toxic green color is killer.. :up: Hey how did you make the freaking cool avatar in your sig of this build.. :shocked: