Printable View
This board is coming tomorrow. Does anyone have any volt mods for it? I have heard that the vcore is an easy one and it's the most important one for me. Anyone know? A search revealed nothing.
Also does anyone have this board with a Mach1 or Mach2? How does the evap seat on this board? Any problems?
Thanks ;)
I can't answer your questions, but I can tell you Nventiv has cpu kits for A64. Should be available within a week or so.
Hey, that's great news! Thanks mrzee :DQuote:
Nventiv has cpu kits for A64
I will watch for them. I may end up using the Mach1 which has custom evap anyway.
there is a post on here with the chaintech mod from mickey ,but i have full pics of the chaintech before i shipped it back on a rma so dont worry .:D
Sweet! Great Pics! How did I miss them?
Thanks!:D
I just shorted out an NF7-S by "probing" it.:( Hand slipped.
Looks like I will be heading to the shack today. ;)
Bump :toast:
Hey mickey, Can i use a 30K VR for the VDIMM? i dont have a 50K VR on me and no way of getting to the store anytime soon.
I have a bunch of fixed resistors though.. Exactly what resistance do i want to get around 3.2v?
Dude-www.Kit-Tronics.com has the AMD64 CPU kit at the moment.
it's really hard to find at the moment, but I just orderd mine there today. Previous experiences with them were always really good, my P4 kit came from them too.
they are in canada but ship to the USA as well.
just saying this, cause the A64 CPU kits are extremely hard to find at the moment for me ;)
I have one in transit...in UK right now...headed my way.:D
Ok thanks MM! Will pick one up right away.. THought i had a 30k vr but its a 10k..
I must of missed the damn email reply notification hehe.. I was like damn he dont wana answer my question but ya did days ago.. Wish i would of seen it earlier since i need to know if this Mushkin crap is gona fly on this or not.. Though i probably will have to buy up some 256 x 2 ram anyways... like ya said before.. THough its gona hurt not havin a gig anymore.
Hey would this work? Link
Thats all i could find. Radio shack didnt have anything over 10K for a trimmer VR. :(
I've used a 10K version of this for the NF7-S VDD mod and it worked.
I imagine i'd have to be very carefull turning this one though so i dont blow up the memory.
So set it at 50K and hook it up and start lowering it till i get to my desired voltage right?
Is there a place on the MB that i could take a reading so i wouldnt have to install anything on the board and risk blowing it up?
If using this isint the best idea couldnt i just slap a 20K fixed resistor on it?
Jason i dont know if you made a mistake but there are differtent VRs for the Vcoe mod on your 2 pictures :confused:
I used the 20 k but its very confusing for some other pleople i guess.
Look here Vcore 20k :
http://jason57.iwarp.com/vcore.jpg
And here the same Vcore 50k :
http://jason57.iwarp.com/vcore10.jpg
Well guys you gotta agre that its kinda confusing.
But thx for the mods Mickey :)
im going to resurrect this thread beacuse i want to do the mods to a VNF3-250, which has the same layout as the ZNF3-150. i would like to see the pics please...
Yup! Me to!
pics of a VNF3-250 Vdimm/Vcore mod will be very appreciated!
( just found this: http://forums.techpowerup.com/showthread.php?t=129 )
Cya,
SliNgky
if the pics that were originally here are any different from those in that thread, i still would like to see them.Quote:
Originally Posted by SliNGky
I don't understand what do you want to say...?
cya,
SliNGky
im saying, i see the pics in the thread you linked to, but if the pics that were originally here were any different, id like to see those still.
Chaintech:
Vcore mod:
http://www.vr-zone.com.sg/Shamino/ch...techvcore1.jpg
Pin 10 to 100K VR to ground
Vdimm:
http://www.vr-zone.com.sg/Shamino/ch...ntechvdimm.jpg
You will need a 200K ohm VR between pin 5 and 8.
Vchipset:
http://www.vr-zone.com.sg/Shamino/ch...aintechvdd.jpg
Pin 6 to 5K VR to ground
hmm, thanks dude.
i have 2 10kvr's right now, if i put them together, what voltage would 20k on the vcore mod give me? i will be shooting right for about 1.95v.
anyone know which resistances correspond to what vcores?