Project:PURE

I've posted this project in a couple of other places and thought i'd post it here aswell for your parousal,the build consists of a Lian Li G70,powder coated white outside,black inside with the roof cut out to house a PA120.3 and the floor cut out to house a PA120.2,window cut out and a few cable management holes.The hardware going inside will be:

Asus P6T Deluxe
Core i7 920
6Gb DDR3 Corsair Dominator 1600MHz
GTX 280
Antec Quattro 1000W PSU
1TB Samsung Spinpoint F1
500Gb Samsung Spinpoint F1

Cooling:

PA120.3
PA120.2
DDC-1T Pro/XSPC Top
DDC-1T Ultra/XSPC Top
2 x Bitspower 5.25 White bay res's
XSPC Delta V3 CPU Block
MIPS Mosfet and dual N/B-S/B Block
Danger Den White UV 3/8"IDx5/8"OD Hose
White Enermax Cluster Fans

Anyway here's the case

http://i296.photobucket.com/albums/m...0/DSCF2045.jpg

http://i296.photobucket.com/albums/m...0/DSCF2047.jpg

Cutouts for the PA120.2 and cable management holes

http://i296.photobucket.com/albums/m...0/DSCF2065.jpg

PA120.3 tapped for M4 bolts and test fitted

http://i296.photobucket.com/albums/m...0/DSCF2064.jpg

http://i296.photobucket.com/albums/m...0/DSCF2059.jpg

http://i296.photobucket.com/albums/m...0/DSCF2061.jpg

Fans and PA fixed to case top

http://i296.photobucket.com/albums/m...0/DSCF2069.jpg

http://i296.photobucket.com/albums/m...0/DSCF2076.jpg

http://i296.photobucket.com/albums/m...0/DSCF2079.jpg

Top fitted back on case

http://i296.photobucket.com/albums/m...0/DSCF2080.jpg

Fitted the fans and fittings to the PA going in the bottom

http://i296.photobucket.com/albums/m...9_03150001.jpg

http://i296.photobucket.com/albums/m...9_03150004.jpg

http://i296.photobucket.com/albums/m...9_03150008.jpg

Rad and fans fitted

http://i296.photobucket.com/albums/m...9_03150018.jpg

http://i296.photobucket.com/albums/m...9_03150016.jpg

http://i296.photobucket.com/albums/m...9_03150021.jpg

Here's the res's i'm using

http://i296.photobucket.com/albums/m...0/DSCF2295.jpg

http://i296.photobucket.com/albums/m...0/DSCF2297.jpg

http://i296.photobucket.com/albums/m...0/DSCF2301.jpg

http://i296.photobucket.com/albums/m...0/DSCF2303.jpg

Got the tops on the pumps,braided and fitted

http://i296.photobucket.com/albums/m...2305Medium.jpg

http://i296.photobucket.com/albums/m...2311Medium.jpg

http://i296.photobucket.com/albums/m...2312Medium.jpg

And the Res's

http://i296.photobucket.com/albums/m...0/DSCF2307.jpg

http://i296.photobucket.com/albums/m...2316Medium.jpg

http://i296.photobucket.com/albums/m...2317Medium.jpg

I'll update this over the next couple of days untill I get up to where i'm at now.

wow this build looks promising, i like the colour scheme, i think it will look very neat indeed!! its nice to see another Lian Li case modded!!

your equipment is good, especially the spinpoints! im running two 1TB HDD's they work like a freaking dream!!

cant wait to see this build progress and grow!

best of luck man keep up the great work!

:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
Exceptional! This is the exact powder coating I'm having done, even the same fans, for my MM Ascension... I'm very happy to see this color combo before I get my case... It was a bit nervous about the colors but now I'm sure. Well done.

Wow nice work so far.

Nice, I wondered how would case black inside and white/silver outside look like last time. Waiting for more photos ;)

Quote:

---

Originally Posted by exemay

wow this build looks promising, i like the colour scheme, i think it will look very neat indeed!! its nice to see another Lian Li case modded!!

your equipment is good, especially the spinpoints! im running two 1TB HDD's they work like a freaking dream!!

cant wait to see this build progress and grow!

best of luck man keep up the great work!

---

Thanks,i've got a Spinpoint in my present rig and thought i'd use them in this aswell :up:

Quote:

---

Originally Posted by xaxis

:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:
Exceptional! This is the exact powder coating I'm having done, even the same fans, for my MM Ascension... I'm very happy to see this color combo before I get my case... It was a bit nervous about the colors but now I'm sure. Well done.

---

Thanks,glad it helps :)

Quote:

---

Originally Posted by HuffPCair

Wow nice work so far.

---

Thanks :)

Quote:

---

Originally Posted by Oskaliber

Nice, I wondered how would case black inside and white/silver outside look like last time. Waiting for more photos ;)

---

Oh there'll be plenty of them :D

I thought i'd make a dust filter for the PA120.3 out of 2mm aluminium,here it is test fitted

http://i296.photobucket.com/albums/m...0/DSCF2325.jpg

http://i296.photobucket.com/albums/m...0/DSCF2326.jpg

Sprayed up and mesh fitted

http://i296.photobucket.com/albums/m...9_04100010.jpg

http://i296.photobucket.com/albums/m...9_04100008.jpg

http://i296.photobucket.com/albums/m...9_04100009.jpg

Fitted to the rad

http://i296.photobucket.com/albums/m...9_04100013.jpg

http://i296.photobucket.com/albums/m...9_04100015.jpg

I got the mobo blocks fitted aswell,here's the board with stock cooling

http://i296.photobucket.com/albums/m...0002Medium.jpg

http://i296.photobucket.com/albums/m...0005Medium.jpg

Heatpipes off

http://i296.photobucket.com/albums/m...0035Medium.jpg

http://i296.photobucket.com/albums/m...0032Medium.jpg

http://i296.photobucket.com/albums/m...0033Medium.jpg

http://i296.photobucket.com/albums/m...0034Medium.jpg

The blocks i'm using,XSPC Delta V3

http://i296.photobucket.com/albums/m...0024Medium.jpg

MIPS mobo blocks

http://i296.photobucket.com/albums/m...0018Medium.jpg

http://i296.photobucket.com/albums/m...0020Medium.jpg

http://i296.photobucket.com/albums/m...0021Medium.jpg

The blocks fitted

http://i296.photobucket.com/albums/m...0043Medium.jpg

http://i296.photobucket.com/albums/m...0044Medium.jpg

Next update tomorrow with the tubing fitted for the first loop.

Quote:

---

Originally Posted by subset7

Thanks,i've got a Spinpoint in my present rig and thought i'd use them in this aswell :up:

---

u certianly wont regret it...im ordering a third 1tb spinpoint sometime in the next week!!

they are faster than raptors :yepp:

love them!!

you computer is coming along fast....another :up: on your motherboard, my brother is using the same 1....though he only has the NB block installed, he has his i7 running very fast indeed and he loves it!

Thoes radiator mesh's look very interesting indeed! i just wonder how quick they will fill up with dust though?? would be nice to see how they fair up after a few months!

Hope you build reamins flowing smoothly!!

best of luck with it :up::up:

Thanks exemay,I usually clean my filters out every couple of weeks anyway so i'll see how dusty they get :)

Here's some pics of the first loop tubed up

http://i296.photobucket.com/albums/m...0048Medium.jpg

http://i296.photobucket.com/albums/m...0050Medium.jpg

http://i296.photobucket.com/albums/m...0054Medium.jpg

http://i296.photobucket.com/albums/m...0057Medium.jpg

http://i296.photobucket.com/albums/m...0052Medium.jpg

Fitted in the case and filled

http://i296.photobucket.com/albums/m...0059Medium.jpg

http://i296.photobucket.com/albums/m...0062Medium.jpg

http://i296.photobucket.com/albums/m...0065Medium.jpg

http://i296.photobucket.com/albums/m...0066Medium.jpg

http://i296.photobucket.com/albums/m...0068Medium.jpg

http://i296.photobucket.com/albums/m...0070Medium.jpg

http://i296.photobucket.com/albums/m...0072Medium.jpg

http://i296.photobucket.com/albums/m...0076Medium.jpg

I'm off to Portugal tomorrow but will post pics of the second loop when I get back next week :)

wow that tubing is really really nice! what make is it??

just 1 little question....i see you have your loop feeding into the NB/SB block, then to the two mosfets and then to the CPU?? any reason for this? i was under the impression that you should always go to the CPU first so that your not delivering hot/warm water to the CPU...

anywho its looking very nice indeed!! i love the colours in this build, keep up the neatness!!

wow this build is awesome. I really like your progress.

Tubing looks like XSPC 3/8" 5/8" Glossy White, Ive got it in my rig too its awesome.

Very clean. White tubing is one of the best looking tubing out there I think.

Great use of space and I love the white/black theme. Those Enermax fans are beautiful! Very clean, me likey!

Thanks for the comments everyone :up:
@ exemay,the tubing is This,as for the loop order the second or two that the water will take to pass from N/B to CPU it'll only be about 1 degree differance in a single pass,so i'm not really worried about it :)

I got the second loop done,here's the card,I got this one because of the black back plate

http://i296.photobucket.com/albums/m...0005Medium.jpg

http://i296.photobucket.com/albums/m...0007Medium.jpg

Fitted and tubed up

http://i296.photobucket.com/albums/m...0010Medium.jpg

http://i296.photobucket.com/albums/m...0013Medium.jpg

http://i296.photobucket.com/albums/m...0019Medium.jpg

http://i296.photobucket.com/albums/m...0023Medium.jpg

http://i296.photobucket.com/albums/m...0028Medium.jpg

http://i296.photobucket.com/albums/m...0051Medium.jpg

http://i296.photobucket.com/albums/m...0054Medium.jpg

Ive got an update on the DVD Drive but i'll post that tomorrow.

man that white tubing looks so clean!! i want!! hehe

looking very good still, i love the attention to detail in this build.....BTW what camera do u use??

keep the awesome updates coming! i wanna see this finished :p:

good work

Thanks exemay,much appreciated,the camera is a Fuji FinePix S5800,not a very good one but meh...

This is what I done to the Drive

http://i296.photobucket.com/albums/m...9_05100040.jpg

http://i296.photobucket.com/albums/m...9_05100041.jpg

Stripped down and primed

http://i296.photobucket.com/albums/m.../Photo0060.jpg

Sprayed satin black and reassembled

http://i296.photobucket.com/albums/m...Picture005.jpg

http://i296.photobucket.com/albums/m...Picture002.jpg

That's all i've got for now untill I do the braiding.

Here's a couple of pics of the PSU before braiding

In keeping with the black and white theme

http://i296.photobucket.com/albums/m...9_05100042.jpg

http://i296.photobucket.com/albums/m...9_05100046.jpg

24 pin plug removed

http://i296.photobucket.com/albums/m...Picture007.jpg

Murder Mod psycho pack braid

http://i296.photobucket.com/albums/m...9_05100037.jpg

http://i296.photobucket.com/albums/m...9_05100034.jpg

Got to love the personal touch

http://i296.photobucket.com/albums/m...9_05100035.jpg

I'll post pics of the 24 pin braided over the weekend.

looking pretty nice....i wanna sleeve up my system, but the coloured cable braiding hasnt come to the uk yet which is what im waiting for...well have been waiting for since early may :(:( oh well!

cant wait to see the whole system braided up ands looking nice and neat! keep up the good work,!!!

I didn't get any drawings on my sleeving pack :(

hehe

Looking great mate, that white theme is looking realy unique!

Good luck to your hands for the 24 pin sleeving.

Too bad your couldn't get the white sleeving kit. That would have looked so cool. Great looking build. I really do like a good black and white build. The look so clean when done right. :up:

I did consider the white sleeving but thought in might be a bit overkill with the white tubing and the outside
@ exemay what colour sleeving are you looking for?

Maybe the black sleeving with a couple of wires sleeved in white would have looked awesome.
One way or another, this build is a very beautiful one, love the attention to detail you have.
Keep it up ;)

That could be an idea, sleeve the Sata cables white, or to go with the board theme, red Sata cables.

Quote:

---

Originally Posted by subset7

I did consider the white sleeving but thought in might be a bit overkill with the white tubing and the outside
@ exemay what colour sleeving are you looking for?

---

Im looking for blue...

http://www.mdpc-x.com/MDPC-Sleeve/Sl...Aquamarine.htm

i emailed nils ages back, in may he keeps telling me that he was gunna put it up next week, then the week after and so on and so fourth, then he promised me it would be back up last week, but to no avail, ive given up tyring to get any murdmermod sleeving, so im gunna look for some other stuff

PS i also think that if u do like 2 or 3 white accenting braiding it would look SUPERB! cant wait to see the stuff sleeved up and in ur case! best of luck

exe