Q9550 + Asus P5Q-E @ 506 FSB any suggestions?

here the times everything runs OK, sometimes hangs,
wheel beauty with the times 500,501,502 and the same configuration as often hangs

http://img149.imageshack.us/img149/6...linpackokx.jpg

anyone have any suggestions? I would 506 stable

http://img507.imageshack.us/img507/9...inpackerro.jpg

if possible I would like to more :ROTF:

Your scores look very good for a cheap motherboard - nice :up:

Nice result, I don't think you can expect much more fsb with a quadcore. :)

great config man...

this topic should be moved to Overclocking Q&A

thanks for your kind words
I think the P5Q-E has to be in the same 500 FSB
I can not get 506 stable

I will see if a compromise U3DP, being the champion with the Q9550 :D

Is that PL 13 required for stability ? Did you try to get lower there ? I would test CPU alone first via Prime Small FFT, then work on the NB settings via Blend...

with this clock can use PL10
do the test here with Prime95

how long do you think proper to leave running the Small FFT?

raise VTT or in your case it's called VFSB. if there's more fsb to be had that's where it will come from.
Or just get UD3P. At least their early boards had very well binned P45 chips and i hate ASUS boards in general with the exception of RE.

Quote:

---

Originally Posted by Slovnaft

raise VTT or in your case it's called VFSB. if there's more fsb to be had that's where it will come from.
Or just get UD3P. At least their early boards had very well binned P45 chips and i hate ASUS boards in general with the exception of RE.

---

Thanks for the tip, but increased the vFSB unsuccessfully
I was even thinking of getting a UD3P