IxTk 'Red Arm' cascade cools a 920 D0 slept in a Classified: 250x21 @1.41vCORE :)

We recieved this board couple of days ago at the shop. Boblemagnifique quickly tried it first but didn't really had time.

Well, I've started playing with it yesterday and had hard times figuring out how to properly use it.

Both the motherboard and the chip aren't hand picked... just out of the box. :up:

So please don't pay attention to time efficiency, it's more likely brutal BCLK clocking here. As you'll see it was required to sacrify timings in order to push up the BCLK.

Code:

---

M/B：eVGA Classified 760
CPU：Intel Core-i7 920 D0 3849A772
CPU cooling：IxTk 'Red Arm' Cascade (R290 / R23) -84C evap loaded
Memory：OCZ PC3-16000 CL7 1.65v
VGA：Gigabyte X800XL
HDD：Western Digital 500GB SATA-II
Power Supply：Cooler-Master 850W

---

http://img515.imageshack.us/img515/7163/img8396.jpg

http://img515.imageshack.us/img515/5679/img8403.jpg

http://img521.imageshack.us/img521/3350/classi0.jpg

114MHz pci-e finally proved to be good enough.

http://img518.imageshack.us/img518/1037/classi1.jpg

1.35vtt was too much, I used 1.3v.

http://img518.imageshack.us/img518/3109/classi2.jpg

http://img518.imageshack.us/img518/5182/classi3.jpg

http://img515.imageshack.us/img515/4186/9205258cpuz.png

http://img515.imageshack.us/img515/3...5153spi32m.png

By setting maxmem to 600 and Memory Low Gap to 2.5Gb I did 248.4x21 Spi32M as well. I've to say, to improve stability you DO need maxmem=600, nothing to do with efficiency but with stability. ;)

Tomorrow I'll put the setup under another cascade...

loving it, loving it, loving it!!!

keepem coming :D

Nice to see u at work with the Classified, enjoy buddy :up:

The classified strikes again with the DO, i am so waiting for eveythng to come in and DO it to.

great stuff, it's just awesome that you ran that with retail gear, monster job.
plus love that rig you got there --- rippin it with the "red arm"

I like your brutal approach :yepp: nice clocks :up: Looks to me the best combo around - Classified and 920 DO

Quote:

---

Originally Posted by dpa

loving it, loving it, loving it!!!

keepem coming :D

---

Thanks dude! :)

Quote:

---

Originally Posted by loc.o

Nice to see u at work with the Classified, enjoy buddy :up:

---

Thanks buddy ;) Hopefully I'll broke 250BCLK today with more cold.

Quote:

---

Originally Posted by systemviper

The classified strikes again with the DO, i am so waiting for eveythng to come in and DO it to.

great stuff, it's just awesome that you ran that with retail gear, monster job.
plus love that rig you got there --- rippin it with the "red arm"

---

Thanks ;) I was sceptical to be honest; but thanks to an unexpected monster CPU I've been able to push the Classified up and really enjoyed it. :p:

Quote:

---

Originally Posted by runmc

I like your brutal approach :yepp: nice clocks :up: Looks to me the best combo around - Classified and 920 DO

---

Very true buddy :) IMHO what makes the difference between the Classified and another board are all those BIOS settings that can be adjusted when hitting a BCLK wall. I mean, the DFI X58 DK does a decent job here but I've got no way demolishing a ~235BCLK wall.... :shrug: Basically you've to pray for a CPU that perfectly fit with default settings of the board if you wanna go to big BCLK skies...

very nice mate!

noticed cpuz reports x8 link width ?

Great clocks dude.this combination is killing!!!

:eek: well done before =) good work there m8

well done Before very nice D0 you got there
time to do some nice 32m action :D

nice shot

great clocks :up: keep pushing...

Well done! Nice work dude!:up:

nicely done & great clocks!

Here's 248.4x21. Time is awfull for those clocks but I had to loose timings in order to push out the BCLK.

249x21 is possible I guess. But more the BCLK, slower the time! :p:

http://img190.imageshack.us/img190/1...5216spi32m.png

Quote:

---

Originally Posted by eva2000

very nice mate!

noticed cpuz reports x8 link width ?

---

Thanks George. Well yes, perhaps a matter with high pci-e? Dunno actually.

Quote:

---

Originally Posted by crustytheclown

Great clocks dude.this combination is killing!!!

---

Thx :)

Quote:

---

Originally Posted by PytonOrm

:eek: well done before =) good work there m8

---

Thanks mate ;)

Quote:

---

Originally Posted by hiwa

well done Before very nice D0 you got there
time to do some nice 32m action :D

---

Thank you. Next step will be improvement of times. ;)

Quote:

---

Originally Posted by carpo93

nice shot

---

Thanks ;)

Quote:

---

Originally Posted by Afrokalle

great clocks :up: keep pushing...

---

Thanks ;)

Quote:

---

Originally Posted by over@locker886

Well done! Nice work dude!:up:

---

Thanks dude ;)

Quote:

---

Originally Posted by TheKarmakazi

nicely done & great clocks!

---

Thank you! :)

you need very low voltage for this great clocks :up: - my chips needs more vcore...

I´ve tested my first EVGA Classified for a few weeks and the board / cpu needs vtt +350 for high bclock - my new Classified and CPU won´t run good with high VTT - best setting ist +125 to +150 (like in your setting) for pushing bclock.


Played on the weekend a little bit with dry ice - since i´ve got the classified i can´t stop benching :D...


http://www.abload.de/img/p1020229800x600gov6.jpg


World Record Xeon W3520 CPU-Z@5174MHz:

http://www.abload.de/thumb/cpu-zhwhw.png

http://valid.canardpc.com/show_oc.php?id=568462


Super PI 1M:

http://www.abload.de/img/1mhwbotuve0.png


PI Fast:

http://www.abload.de/img/pifastbestlwwt.png


http://www.abload.de/img/2800x6007trv.png


Core i7 920 D0@5153MHz:


CPU-Z:

http://www.abload.de/thumb/cpu-zsu6q.png

http://valid.canardpc.com/show_oc.php?id=568444


Super PI 1M:

http://www.abload.de/img/1mbest2w25.png


Super PI 32M:

http://www.abload.de/img/32mbestvu64.png


Pi Fast:

http://www.abload.de/img/pifastbest2rx4.png


wPrime 32M:

http://www.abload.de/img/wprimebestmqv6.png


Impressions:


http://www.abload.de/img/3800x600etre.png

http://www.abload.de/img/5800x6001tdo.png

http://www.abload.de/img/4800x600rwc9.png http://www.abload.de/img/p1020320800x600uw6m.jpg


Thanks to EVGA and Shamino for creating this great clocking motherboard


http://www.hwbot.org/signature/u14547.png

Nice set of benchies dude ;)

before, can you show us some pics of the "Red Arm" ? :D

Quote:

---

Originally Posted by before

Nice set of benchies dude ;)

---

Thanks mate :)

I hope i´ll get next days some LN2 - keep pushing :up:

Well I've spent hours trying to brake 7mins but the system is too unstable; looks like it won't succeed, each time it's computing as fast as required, it never ever passes 23th loop no matter the clocks... looks like bandwidth unstability to me. :)

http://img196.imageshack.us/img196/6...5174spi32m.png

Quote:

---

Originally Posted by overcrash

before, can you show us some pics of the "Red Arm" ? :D

---

Here's the cascade. Needs a bit more of insulation, and to find a nice color to paint it.

http://img38.imageshack.us/img38/5719/img8469.jpg

Quote:

---

Originally Posted by Afrokalle

Thanks mate :)

I hope i´ll get next days some LN2 - keep pushing :up:

---

Thanks ;) Hope it for you too.

Finally did it guys... but what a challenge with such unstability! :) Switched to last beta bios which proved to be a bit more stable at high BCLK (might be a matter of VREF)

http://img526.imageshack.us/img526/1...5195spi32m.png

you have killer chip too man
good bclk with a low vtt,i'll test it this weekend if have time.

Thanks mate :) my chip doesn't like vtt too much, 1.3v looks just fine (actually 1.3v correponds to 1.27-1.28v under load, checked that this afternoon with DMM). Same thing with vcore, I've set 1.42v for being safe but 1.41v might be enough. :)

nice one but why this classified does not activate 22x ??

Thanks mate; well I'm using an x8 slot.

Slightly faster here...

http://img242.imageshack.us/img242/1...5195spi32m.png

Hoping for even faster now. :)