Project WC LianLi PC-A7010B

First of all, i would like to thank Vincent from Bitspower to arrange a shipment to me when i'm in Taipei :clap: for me to get in hold of most of the WC parts i need.

Here are some pics while waiting for my others parts to arrive =P

http://forum.lowyat.net/index.php?ac...post&id=935782
Lian Li PC-A7010B

http://forum.lowyat.net/index.php?ac...post&id=929993
http://forum.lowyat.net/index.php?ac...post&id=935786
http://forum.lowyat.net/index.php?ac...post&id=935788
T-70103B and W-75BT both fit in perfectly =D

http://forum.lowyat.net/index.php?ac...post&id=929994
Noise Blocker Fans!

http://forum.lowyat.net/index.php?ac...post&id=935789
Stripped down everything on the case.

http://forum.lowyat.net/index.php?ac...post&id=935790
http://forum.lowyat.net/index.php?ac...post&id=935791
Replaced all the fans with NB fans

http://forum.lowyat.net/index.php?ac...post&id=929996
Stripped Rampage II extreme

http://forum.lowyat.net/index.php?ac...post&id=929992
Some WC parts i got from Vincent =P

http://forum.lowyat.net/index.php?ac...post&id=929998
Bits Fittings Army

http://forum.lowyat.net/index.php?ac...post&id=935795
http://forum.lowyat.net/index.php?ac...post&id=935796
Mosfet Blocks for RIIE

http://forum.lowyat.net/index.php?ac...post&id=935797
Bits Full NB/SB Block for RIIE

http://forum.lowyat.net/index.php?ac...post&id=935798
Alphacool CPU block for i7

Will update later on when i start putting up things together =D

I'd definitely love to see more pics, this is the case I'm thinking of using on my next build, are you just going to mount a triple at the top or are you thinking of throwing a double rad at the front as well?

acther?
hehehe

http://forum.lowyat.net/index.php?ac...post&id=942512
D5 Vario with mounting

http://forum.lowyat.net/index.php?ac...post&id=942513
M/B tray with few laser cut holes

http://forum.lowyat.net/index.php?ac...post&id=942514
All Blocks has been soaked in coke :ROTF:

http://forum.lowyat.net/index.php?ac...post&id=942515
Feser, Noiseblocker

http://forum.lowyat.net/index.php?ac...post&id=942516
Mounted blocks on M/B

http://forum.lowyat.net/index.php?ac...post&id=942517
Using different Noiseblocker fan to pull

http://forum.lowyat.net/index.php?ac...post&id=942518
http://forum.lowyat.net/index.php?ac...post&id=942519
Superbly troublesome to mount the rad onto T-70103B

http://forum.lowyat.net/index.php?ac...post&id=942520

http://forum.lowyat.net/index.php?ac...post&id=942522

http://forum.lowyat.net/index.php?ac...post&id=942524
Everything in the case, starting on the Fittings and tubings

http://forum.lowyat.net/index.php?ac...post&id=942525
Freaking headache looking at those cables

http://forum.lowyat.net/index.php?ac...post&id=942526
http://forum.lowyat.net/index.php?ac...post&id=942527
Yea, the routing of cables is a bit complicated, but the compression barbs are too huge. Need to find the longest way to prevent tube kinking

Change plug and connector here and there. Turn reservoir in left side. Connection between reservoir and pump will be more perpendicular ;)

Look this:
http://img99.imageshack.us/img99/6516/a16.th.jpg

bro which plug n connector you mean?

yea the res n the pump top is very tight. need to redo it, it's leaking on the compression of pump inlet now T_T stressed too much.

http://forum.lowyat.net/index.php?ac...post&id=942528
First run

http://forum.lowyat.net/index.php?ac...post&id=942529
Look at the complicated tubings, cant get a better way. the tube is way to big

http://forum.lowyat.net/index.php?ac...post&id=942530
There the rad push pull

http://forum.lowyat.net/index.php?ac...post&id=942531
Lovely Bits block

http://forum.lowyat.net/index.php?ac...post&id=942532
http://forum.lowyat.net/index.php?ac...post&id=942534
Round Round Round

http://forum.lowyat.net/index.php?ac...post&id=942536
http://forum.lowyat.net/index.php?ac...post&id=942537
http://forum.lowyat.net/index.php?ac...post&id=942540
The ram fans doesnt look too bad

http://forum.lowyat.net/index.php?ac...post&id=942539
Turn here n There >.<

http://forum.lowyat.net/index.php?ac...post&id=942541
http://forum.lowyat.net/index.php?ac...post&id=942542
Favorite fan of mine

http://forum.lowyat.net/index.php?ac...post&id=942544
http://forum.lowyat.net/index.php?ac...post&id=942545
Overall Pic.


OK, THE PUMP INLET BARB IS LEAKING, HAVE TO SOLVE IT FIRST :(

Very nice build. I'll start my project on this case model very soon. Do you intend to paint the interior or you will leave it like this?

Great build.:up:

Quote:

---

Originally Posted by ibm390s

Very nice build. I'll start my project on this case model very soon. Do you intend to paint the interior or you will leave it like this?

Great build.:up:

---

I'll just leave it like this, tried to dismantle the case but i failed. LOL

Looking nice, but I have a question :

I bought the PC-A70B and the matching T03B top panel (for tripple fan/rad combo).
I received my tripple Feser last week and I noticed that it won't fit the top.
By this I mean that the fan spacing isn't correct.
The T03B has 12mm fan spacing, while the feser rad has 15mm, which means only the middle fan will fit the top.

I noticed that you have the same rad I have, the case looks more or less smilar to mine (dimensions should be the same), but the Feser rad seems to fit without any problems.

Can you do me a favor and measure the distance between the mounting screws for the fans (measuring from the inner edge of each hole, if you know what I mean), this on both the top panel and the Feser rad.

My drawing skills are ribbish, but this should give you an idea of what I mean (2 white lines between the bottom fan holes).


http://www.abload.de/img/a6rro3.jpg

Very nice build aCt!, I am such a sucker for Lian Li Cases :D

Tearing apart Lian Li cases is very easy, all you need is to drill out the knits holding all the parts to the chassis.
I usually take a few drillers, at 1-3mm in diameter and start from the smallest and then I increase the diameter of the driller until it breaks.

sure thing bro, will do that when i get home tonite =D
all the spacing comes of the screws come just nice for the feser rad for T70103
It's kinda wierd that u said ur spacing is different. Will measure for u later

Quote:

---

Originally Posted by The-Fox

Very nice build aCt!, I am such a sucker for Lian Li Cases :D

Tearing apart Lian Li cases is very easy, all you need is to drill out the knits holding all the parts to the chassis.
I usually take a few drillers, at 1-3mm in diameter and start from the smallest and then I increase the diameter of the driller until it breaks.

---

I'm a noob is modding, even cutting the MB tray i sent for laser cut after i drew the holes i wanted :(

the feser 360 has 2 designs, theres the 12mm and 15mm if I am not mistaken.

Actually, the first revision had 17mm spacing, the newer ones (after may 2008) have 15mm spacing.

Juliper, the T-703B top cover definitely has 15mm spacing (at least mine has). Are you measuring center hole to center hole?

Quote:

---

Originally Posted by Jupiler

Looking nice, but I have a question :

I bought the PC-A70B and the matching T03B top panel (for tripple fan/rad combo).
I received my tripple Feser last week and I noticed that it won't fit the top.
By this I mean that the fan spacing isn't correct.
The T03B has 12mm fan spacing, while the feser rad has 15mm, which means only the middle fan will fit the top.

I noticed that you have the same rad I have, the case looks more or less smilar to mine (dimensions should be the same), but the Feser rad seems to fit without any problems.

Can you do me a favor and measure the distance between the mounting screws for the fans (measuring from the inner edge of each hole, if you know what I mean), this on both the top panel and the Feser rad.

My drawing skills are ribbish, but this should give you an idea of what I mean (2 white lines between the bottom fan holes).


http://www.abload.de/img/a6rro3.jpg

---

Have already measured for u. It's 0.9cm for the white lines that u drew. It's the distance between the screws (not from center to center)

Thanks for measuring it.

I don't wanna hijack your thread, so I'll be opening a new one in the Liquid Cooling section with some more detailed pics.

I measured the distance between the screwholes of the Lian Li top , to give you an idea of what I meant.


http://www.abload.de/img/lianlitopbccl.jpg

Quote:

---

Originally Posted by aCt!

I'm a noob is modding, even cutting the MB tray i sent for laser cut after i drew the holes i wanted :(

---

If you want to learn the art of modding, you have to get your hands dirty.
Otherwise you are just missing all the fun of it :p:

Again, very nice build :up:

Quote:

---

Originally Posted by Jupiler

Thanks for measuring it.

I don't wanna hijack your thread, so I'll be opening a new one in the Liquid Cooling section with some more detailed pics.

I measured the distance between the screwholes of the Lian Li top , to give you an idea of what I meant.


http://www.abload.de/img/lianlitopbccl.jpg

---

Hmm why is yours longer than mine. mine is accurately 9mm only

Quote:

---

Originally Posted by The-Fox

If you want to learn the art of modding, you have to get your hands dirty.
Otherwise you are just missing all the fun of it :p:

Again, very nice build :up:

---

Will try on it maybe later on =D