PHENOM II AM3/DDR3 Ram Overclocking List

Printable View

Show 100 post(s) from this thread on one page

04-20-2009, 06:25 AM
Oese

PHENOM II AM3/DDR3 Ram Overclocking List

Hey there,

I'd like to see some DDR3 Ram OC Results with Phenom II to build up a Database that makes up for comparability of RAM OC results on the AMD DDR3 Platform (I have no clue if my results are good or bad or whatever LOL ;) because AMD DDR3 results are sparsely spread over the net atm...)

Super PI 32m is chosen as stability test, please post a screen together with cpu-z cpu and memory tabs open at least. As CPU-OC has an impact, please post cpu oc as well please...

Post Results like this:

USER | CLOCK (mhz, not DDR rated) | CPU TYPE AND OC | TIMINGS | VOLTAGE | RAM VENDOR AND TYPE | USED CHIPS (if known) | BOARD | CHIPSET | LINKTOSCREEN

I will post some of my screens soon as a start and example. I think this is gonna be interesting, dont you think so too???

WAITING FOR RESULTS :D :up::up::up:

CL5

Quote:

Skulltre | 802.7Mhz | X2 555 @ X4 B55 3.74Ghz | 5-6-5-16-1T | 1.90v | 2x2GB Corsair Dominator GT PC3-10700H (DDR3-2000) CL8 | Elpida Hypers? | Asus Crosshair IV | 890FX | Link
msimax | 766.7Mhz | x4 955 3.795mhz | 5-5-5-15 1T | 1.9v | 2x1GB kingston hyperx DR3-2000 CL8 | ???? | GB GA-MA790FXT-UD5P | 790FX | Link
chew* | 743.4Mhz | x4 955 3.9g | 5-5-5-15 1T | UNSAFE | 2x1GB Corsair XMS3 DHX DR3-1800 CL7 | ???? | GB GA-MA790FXT-UD5P | 790FX | Link
Jure_5 | 700Mhz | x4 955 3780Mhz | 5-5-5-15 1T | 1.95v | 2x2GB OCZ Flex DR3-2000 CL8 | ???? | MSI 790FX-GD70 | 790FX | Link
chew* | 700Mhz | Opt 1300 3.88g | 5-5-5-15 1T | UNSAFE | 2x1GB Corsair XMS3 DHX DR3-1800 CL7 | ???? | GB GA-MA790FXT-UD5P | 790FX | Link
bro20000 | 640Mhz | X3 720 3g | 5-5-5-15 1T | 1.8v | 2x1GB OCZ Flex XLC DDR3-2000 | Samsung | GB GA-MA790FXT-UD5P | 790FX | Link
Oese | 600MHz | X4 810 2.9g | 5-5-5-18 1T | 1.82V | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5 | 790FX | Link

CL6

Quote:

Skulltre | 935.5Mhz | X2 555 @ X4 B55 3.74Ghz | 6-6-6-18-1T | 1.80v | 2x2GB Corsair Dominator GT PC3-10700H (DDR3-2000) CL8 | Elpida Hypers? | Asus Crosshair IV | 890FX | Link
TiTON|900Mhz | Phenom X4 955@5625 | 6-7-7-20 1T | 2.2v | 2x1GB Crucial Ballistix 2000 CL9 | Micron D9GTS | MSI 790FX-GD80 | 790FX | Link
msimax |888.0Mhz | x4 955 4994mhz | 6-6-6-25 1T | 1.9v | 2x1GB kingston hyperx DR3-2000 CL8 | elpida hyper | GB GA-MA790FXT-UD5P | 790FX | Link
chew* | 860Mhz | x4 955 4.52g | 6-6-5-15 1T | UNSAFE | 2x1GB Corsair XMS3 DHX DR3-1800 CL7 | ???? | GB GA-MA790FXT-UD5P | 790FX | Link
2m* | 850.0MHz | X4 955BE @3.825GHz | 6-7-7-18 1T | 2.12V | 2x1GB OCZ Reaper Platinum Edition PC3-14400 CL9 | ???? | ASUS M4A79T Deluxe | 790FX | Link
Jure_5 | 840Mhz | x4 955 3780Mhz | 6-6-6-18 1T | 1.95v | 2x2GB OCZ Flex DR3-2000 CL8 | ???? | MSI 790FX-GD70 | 790FX | Link
xoqolatl | 833MHz* | x4 955 @ 4g | 6-6-5-15 1T | 2,30V | 2x1GB Corsair Dominator DDR3-1800 | D9??? | ASUS M4A79T Deluxe | 790FX | Link
tiborrr | 833mhz | 720BE @3.875ghz | 6-7-6-18 | 2.12V | 2x512mb Crucial DDR3-1066 | D9HXT | M4A78T-E | 790GX | Link
HanaJetso | 813Mhz | 1.62v | 6-6-6-15 1T | x4 955 @ 3.9g | 2x2GB supertalent DDR3-2200 | Elpida Hyper | GA 790XTA-UD5 | 790FX | Link
chew* | 813Mhz | x4 955 3.9g | 6-6-6-18 1T | UNSAFE | 2x1GB Corsair XMS3 DHX DR3-1800 CL7 | ???? | GB GA-MA790FXT-UD5P | 790FX | Link
bro20000 | 810Mhz | X3 720 3.28g | 6-6-6-18 1T | 1.85v | 2x1GB OCZ Flex XLC DDR3-2000 | Samsung | GB GA-MA790FXT-UD5P | 790FX | Link
chew* | 806.7Mhz | Opt 1300 3.87g | 6-6-6-16 1T | UNSAFE | 2x1GB Corsair XMS3 DHX DR3-1800 CL7 | ???? | GB GA-MA790FXT-UD5P | 790FX | Link
bro20000 | 805.5Mhz | X3 720 3g | 6-6-6-18 1T | 1.95v | 2x1GB OCZ Flex XLC DDR3-2000 | Samsung | GB GA-MA790FXT-UD5P | 790FX | Link
Oese | 746 MHz | X4 810 3.64g | 6-6-6-18 1T | 2.06V | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5 | 790FX | Link
chew* | 700MHz | Opt 1300 3.99g | 6-6-6-16 1T | 1.75v| 2x2GB kingston value 1333 (9-10-10 1.5v) | elpida (non hyper) | gigabyte 790fxt UD5P | 790FX | Link
Oese | 698,7MHz | X4 810 3.4g | 6-6-6-20 1T | 1.77V | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5| 790FX | Link

CL7

Quote:

Skulltre | 963.2Mhz | X2 555 @ X4 B55 3.73Ghz | 7-7-7-21-1T | 1.85v | 2x2GB Corsair Dominator GT PC3-10700H (DDR3-2000) CL8 | Elpida Hypers? | Asus Crosshair IV | 890FX | Link
equinox1 | 938 mhz | 7-7-7-24 1t | 1.685v | 4689mhz cpu | 2x2gb corsair dominator gt's | asus m4a89td pro | 890fx | Link
msimax |932.0Mhz | x4 955 4994mhz | 7-6-6-15 1T | 2.2v | 2x1GB crucial DR3-2000 CL9 | d9gts | GB GA-MA790FXT-UD5P | 790FX | Link
Sam3 | 923Mhz | x6 1090t 4039mhz | 7-8-7-24 1T | 1.74v | 2x2GB G-Skill Tident DR3-2000 CL9 | ??? | Asus Crosshair IV | 890FX | Link
2m* | 916.7MHz | X4 955BE @3.713GHz | 7-7-7-24 1T | 2.20V | 2x1GB OCZ Reaper Platinum Edition PC3-14400 CL9 | ???? | ASUS M4A79T Deluxe | 790FX | Link
chew* | 900MHz* | Opt 1300 5.4g | 7-7-7-21 1T | 2.00V | 1x2GB kingston 2000 (9-9-9 1.65v) | samsung? | gigabyte 790fxt UD5P | 790FX | Link
cdawall | 900mhz*| phenom 955@4.5 | 7-7-7-21 1T | 2.14v | 2x2gb Crucial PC8500 value | D9JNL | Asus M4A78T-E | 790GX | Link
namegt | 896Mhz | x4 955 | 3.58g | 7-7-7-21 1T | 2.0v | Patriot Viper DDR3 PC3-16000 2X2G | ??? | ASUS M4A79T | 790FX | Link
xoqolatl | 860MHz* | x4 955 4g | 7-6-6-16 1T | 2,30V | 2x1GB Corsair Dominator DDR3-1800 | D9JNM | ASUS M4A79T Deluxe | 790FX | Link
chew* | 832Mhz | x4 955 4.26g | 7-7-7-24 1T | 1.57v | 2x1GB Corsair XMS3 DHX DR3-1800 CL7 | ???? | GB GA-MA790FXT-UD5P | 790FX | Link
MadDias | 832Mhz | 955BE 3.85g | 7-7-7-24 1T | 1.9V | OCZ Reaper | ????? | MSI 790FX-GD70 | 790FX | Link
shaolin95 | 803Mhz | x3 720 BE @ x4 3.7g | 7-7-7-30 1T | 1.65v | 2x2GB OCZ DDR3-1600 OCZ3P1600LV6GK | ??? | Gigabyte GA-MA790FXT-UD5P | 790FX | Link
BrowncoatGR | 800Mhz | x3 720 BE @ 3.3g | 7-7-7-20 1T | 1.75v | 2x2GB OCZ3G1600LV2G | ??? | Gigabyte GA-MA790FXT-UD5P | 790FX | Link
Oese | 800Mhz | 1.77v | 7-6-6-18 1T | x4 955 @ 3.7g | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5 | 790FX | Link
Oese | 800Mhz | 1.77v | 7-7-7-20 1T | x4 955 @ 4g | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5 | 790FX | Link

CL8

Quote:

msimax |924.0Mhz | x4 955 4389mhz | 8-6-6-15 1T | 2.250v | 2x1GB crucial DR3-2000 CL9 | d9gts | MSI GD-70 | 790FX | Link
cdawall |900Mhz | Phenom X4 955@3600mhz | 8-8-8-24 1T | 1.9v | 2x1GB Wintec AMPX 1333 CL9 | Samsung HCH9 | Asus M4A78T-E | 790GX Link
msimax |852.0Mhz | x4 955 3834mhz | 8-8-8-25 1T | 1.9v | 2x1GB kingston hyperx DR3-2000 CL8 | elpida hyper | GB GA-MA790FXT-UD5P | 790FX | Link

CL9+

Quote:

cdawall | 900mhz | 955BE @3.6ghz | 10-10-10-30 | 1.7v | 2x1GB Nanya DDR1066 cas7 | Nanya | M4A78T-E | 790GX | Link
chew* | 852MHz | Opt 1300 3.19g | 9-9-9-24 1T | 1.75v| 2x2GB gskill 1600 (9-9-9 1.5-1.65v) | IC's????? | gigabyte 790fxt UD5P | 790FX | Link

INTERESTING THOUGH UNSTABLE RESULTS

Quote:

cdawall | 920mhz** | phenom 955@4.37 | 6-6-6-18 1T | 2.4v | 2x2gb Crucial PC8500 value | D9JNL | Asus M4A78T-E | 790GX | Link
cdawall | 852mhz** | phenom 955@3.62 | 6-6-6-18 1T | 2.14v | 2x2gb Crucial PC8500 value | D9JNL | Asus M4A78T-E | 790GX | Link
cdawall | 852mhz** | phenom 955@3.6 | 8-8-8-24 1T | 2.2v | 4x1GB Samsung PC8500 OEM | Samsung HCF8 | Asus M4A78T-E | 790GX | Link

xxxMhz*: not specifically tested with 32m
xxxMhz**: not tested for stability
04-20-2009, 06:34 AM
Oese

Oese | 800MHz | 7-7-7-24 1T | 2,00V | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5 | 790FX | Screen

http://www.abload.de/thumb/32m800mhzedjw.jpg
04-20-2009, 06:36 AM
Oese

Oese | 698,7MHz | 6-6-6-20 1T | 1,77V | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5| 790FX | Screen

http://www.abload.de/thumb/32m698cl68i3k.jpg

Oese | 746 MHz | 6-6-6-18 1T | 2.06V | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5 | 790FX | Link

http://www.abload.de/thumb/pi32m4ohf.jpg

Oese | 600MHz | 5-5-5-18 1T | 1,82V | 2x2GB Crucial Value DDR3-1066 | D9JNL | DFI LP DK 790FXB-M3H5 | 790FX | Screen

http://www.abload.de/thumb/32mcl5md77.jpg
04-20-2009, 08:57 AM
chew*

how about 3d 06? that stable enough? We didn't bother wasting LN2........
04-20-2009, 08:59 AM
bro20000

Here my cas 5 just a quick test! Fully Stable! Mem 1.80v
[http://www.ukimagehost.com/uploads/2effa3b56f.png
04-20-2009, 09:11 AM
Oese

@ bro20000: nice :up: ... any idea which chips??

@ chew*: i think 3d06 is ok... i will mark that in the list, but i'm interested in results at first, not how they were tested.... ;)
04-20-2009, 09:23 AM
bro20000

Hiya its sig1 in my profile! The memory chips they use are a samsung chip!
04-20-2009, 09:31 AM
Oese

k thx... just entered in list ;)
04-20-2009, 09:44 AM
chew*

chew* | 900MHz | 7-7-7-21 1T | 2.00V | 1x2GB kingston 2000 (9-9-9 1.65v) | samsung? | gigabyte 790fxt UD5P | 790FX |

http://members.cox.net/bostonreefer4...eview%2010.JPG

chew* | 700MHz | 6-6-6-16 1T | 1.75v| 2x2GB kingston value 1333 (9-10-10 1.5v) | elpida (non hyper) | gigabyte 790fxt UD5P | 790FX |

http://members.cox.net/bostonreefer4...elpidatech.jpg

chew* | 852MHz | 9-9-9-24 1T | 1.75v| 2x2GB gskill 1600 (9-9-9 1.5-1.65v) | IC's????? | gigabyte 790fxt UD5P | 790FX |

http://members.cox.net/bostonreefer3/UD5P16.JPG
04-20-2009, 09:54 AM
chew*

BTW I know what your looking for and your answer is samsung or elpida hyper ;) seems the PH II doesn't care for d9 to much in ddr III variants.

ddr II it works fine with d9 up to 1200 so far, I'm struggling with a few 1800 kit of corsairs just for 1700 speeds 32m stable, oddly I had over 1800 memtest stable ( the 3.1 dominators aka the good ones )
04-20-2009, 10:06 AM
Oese

very nice thx :D

i know had many d9gmh and they made me happy... had them running 4x1gb ddr2-1200 24/7 @ 2.24v... well cooled though ;)

so far those d9jnl are nice as well (at least fo the price), actually the 1500 cl6 are running with 1.88v fully stable (just have to make an updated 32m...), but they are lacking max clock speeds, even in 2x1gb configuration...

what chips do those ocz platinum ddr3-2000 use??

800mhz cl6 would be NICE :D
04-20-2009, 10:07 AM
chew*

Preety sure those OCZ are d9.

Same thing with the non hyper elpidas, lacking in max clocks department.

I should have some interesting OCZ's in the next day or so. I will give them the full workout, heard really good things.
04-20-2009, 10:13 AM
Oese

:up: :up: post here too pls :D
04-20-2009, 11:26 AM
chew*

Should make this a challenge/database, it would give me more incentive to post up some insane results ;)

How about 700 cl5?

Will work on 800 cl6 in a bit.
04-20-2009, 12:40 PM
bro20000

Here my cas 6 just a quick test! Fully Stable! Mem 1.95v
http://http://www.ukimagehost.com/uploads/3f3efdbe28.png
04-20-2009, 12:41 PM
Oese

xD i'll try 700 cl5 soon ;)

@ bro20000: w0000t that is nice ;) :up: :up:
04-20-2009, 12:41 PM
chew*

Quote:

Originally Posted by Oese

xD i'll try 700 cl5 soon ;)

Already done ;)
04-20-2009, 01:14 PM
Oese

damn xD

nice result....^^ which chips/sticks?? corsair dhx something... xD voltage?

no way over here... need 2.0v to post and do not get into windows at 700 cl5 :/
04-20-2009, 02:36 PM
chew*

you should require an OC with this........what you think is stable once you try to clock CPU is no longer stable.......

what Voltage you say? :D They have more in them, havent tweaked yet, dirty run.....
04-20-2009, 04:51 PM
chew*

Heres another, I have some better stuff but its reserved for future use, will post it when I can......

Had to match your 805.5 and raise you 1.2 and run a little tighter Bro :D
04-20-2009, 10:37 PM
Oese

:)

yeah i experienced that nb voltage does good on ram oc not sure about what cpu oc does... basically a faster processor and faster nb stresses the RAM more i think...

chew, in the log run, i wanna add voltages to the results xD
04-20-2009, 11:43 PM
Oese

chew has taken the lead ;)
04-21-2009, 12:50 AM
chew*

Quote:

Originally Posted by Oese

:)

yeah i experienced that nb voltage does good on ram oc not sure about what cpu oc does... basically a faster processor and faster nb stresses the RAM more i think...

chew, in the log run, i wanna add voltages to the results xD

yah the faster cpu speed stresses ram and NB alot, why I suggested you require an OC otherwise the database will have skewed misleading results, I can clock ram pretty high when cpu is near stock speed......600 over stock should be sufficient for consistent results......and almost everyone can do that.

voltages? well default for these sticks is 2.0 ;), not my cup of tea for 24/7 use....
04-21-2009, 04:04 AM
Oese

and which voltages did u use for the screens?

added cpu-oc as a "soft" rule now at first (i.e, it should be specified..)...

will have to update the results in the list then...
04-21-2009, 05:49 AM
Oliverda

Has anybody tried any Elpida Hyper chip based modules with PHII?

We should team up any buy two CORSAIR Dominator GT 6GB (3 x 2GB) kits and divide them to three 2x2GB kits. 2000/CL8@1.65V sounds pretty good. :)

Show 100 post(s) from this thread on one page