Theres going to be a little action going down in the east coast this weekend ;)
Just finished rearanging my cubbyhole to give us some room to work.
http://members.cox.net/bostonreefer4/IMG_0535[1].jpg
Printable View
Theres going to be a little action going down in the east coast this weekend ;)
Just finished rearanging my cubbyhole to give us some room to work.
http://members.cox.net/bostonreefer4/IMG_0535[1].jpg
I want that monitor.
I like your full-board cooling solution there :D
Me..Saturday am..
Varoooooom,screeeeech..:D
90 miles and 90 minutes later..
Knock,Knock..:D
Benching on mobo boxes is the in thing to do :cool:
Wow:shocked: That is a cubbyhole!
gotta do some sit ups:ROTF:
Its bigger than it looks ;) well unless dave walks in:rofl:
We can migrate out to here if need be, but i can't control ambients in the kitchen ;)
http://members.cox.net/bostonreefer4/IMG_0539[1].jpg
Bastage!:rofl:Quote:
Originally Posted by chew*
So Chew which Mobo do you like better so far? Gigabyte GA-MA790FXT-UD5P or Asus M4a79. BTW I like your current thread on the Asus mobo :up:
The gigabyte is a solid board and athough it has it's quirks and some limitations it's still capable of putting out TOP #rs....and already has.Quote:
Originally Posted by mikey063
I however am chasing 3dmark multi card records atm so I need to pull out all the stops, 16x/16x PCI lanes included.
I'm waiting for the UD5P to mature a little bit.
Been running my rig this way for the last 3 years :DQuote:
Originally Posted by chew*
You should pick me up on the way. :up:Quote:
Originally Posted by Movieman
You know, you could swing......err 2500 miles west and pick me up! :eek:
Better pick up that french fry before you run it over with your chair :DQuote:
Originally Posted by chew*
That was a butt, after I posted the pic I noticed it. Dropped ashtray earlier that day.Quote:
Originally Posted by Hemi345
Now you can see a picture of an ES ;) Lapping not done all the way but good enough for testing, already killed 2 hours.....
http://members.cox.net/bostonreefer4/IMG_0551[1].jpg
60L ordered, 30 Lbs DI ordered :cool: making final arrangements and plans with those that were invited.
wow, this is a little more than some weekend fun...lol
i take it you guys will try and crack a couple of records here ehh?
i wish you the best of luck with it, and look forward to some meaty results :up:
on a side note, do you have your own containers fro LN2 chew*? or just decant from the delivered container into flascs?
i have little over 30 mins left of my weekend peace, friends are on their way over, as i post, after that the beer runs freely all weekend :up:
have fun guys
Renting 2 30L dewars, Apparently I need to get a ladel, msimax is supplying the thermos for pouring.
My pot isn't done yet so we are using Dumo's and msi max's, Mine has an ETA of 3 weeks. Might invest in a dewar then.
Will be running DI on my home made pot.
Too bad you're in R.I. I've got a 20L sitting upstairs collecting dust.Quote:
Originally Posted by chew*
Gonna save up for a backup board and another 720B.E. and make sparks fly hopefully very soon.
Interested in selling it? hows the vaccuum on it?Quote:
Originally Posted by iandh
Hehe the vacuum is excellent. It was an ebay can with bad vac so I tapped and TIGged in a pipe fitting, then added a 1/4" swagelok w/copper tube, helium leak tested it, and fixed the leak that originally caused it to go bad. Then I heat wrapped it and pumped it out for a few weeks, pinched off the pump-out tube with a refrigeration pinch-off tool, and sealed the pinch with high-vac epoxy. Luckily the leak that caused the bad vac was due to damage on the outside (small crack) and there were no internal leaks (not easily fixable).Quote:
Originally Posted by chew*
The cool thing is that once sealed dewar now is renewable vac, so if it leaks in the future, you could just hook a cheapo refrig pump up to it for a couple weeks and as long as you can find a pinch off tool to use, you are good to go.
Kinda handy working at a thin film vacuum dep. system manufacturer. :shrug:
I was thinking on getting rid of it but now with these cheap, high clocking, cold-loving Phenom II chips available, it may find new life. I'll keep you in mind though if I do decide to get rid...
How is party going chew*?
Anything to share at this point or is it too late/early for you?
Good luck! :up:
Expecting arrivals in the next hour, just woke up.Quote:
Originally Posted by Lightman
Let the Games begin!