ATI & PhysX Working Guide on Win7

http://forums.slizone.com/index.php?...4&#entry273224

Quote:

---

1. Install both sets of GPU's. Ati first then Nvidia
2. Attach GPU's to monitors (2 preferably as you can see what you are doing)
3. Click windows\control panel\all control panel items\display\screen resolution
4. Click detect displays
5. Click and switch to Ati display extended to Nvidia if not already
6. Open CCC panel
7. Disable CrossfireX if enabled
8. Switch to Nvidia only display
9. Unplug the Ati cord and enable PhysX from the nvidia control panel, leave open
10. Plug back in the Ati cord
11. Detect displays in the windows display control panel
12. Extend the display over to Ati
13. Click on the Ati display picture and check the "Make this my main display".
14. Click on disable and enable of PhysX and hit apply. Important, if apply doesn't appear at this stage, you won't have PhysX!
15. Leave on extended display
16. Run vantage 3D mark CPU test 2 to confirm Physx enabled
17. Enable CrossFireX, confirm again with CPU test 2

http://forums.slizone.com/index.php?...e=post&id=6209

http://service.futuremark.com/compare?3dmv=772700

Worked every time on my set up. You may need more power to run hence me using 2 PSU's.

System;

Gigabyte X58 Extreme Mother Board
i7 940 CPU
Gskill 6 gig tri ram
Ati 4870X2 x 2 + Nvidia 280GTX
Coolmaster 1250w + Thermaltake 1200w PSU's with inter connector
WD 500gig HD - Windows7 version 6.1.7000
3 x VecoRaptors 300 gig RAID 5 - Vista Ultimate 64
WD 300 gig storage
1 x DVD burner
24" + 27" monitors

Custom made water cooling with 2 separate system loops

---

Guide by Village

awesome find.

yes looks it dose work.

2 4870x2 in CFX with two 9800 GX2 in SLI and PhysX on Windows 7 from Village

http://forums.slizone.com/index.php?...e=post&id=6211

Does this work on vista 64?

Quote:

---

Originally Posted by malik22

Does this work on vista 64?

---

not with mixed ATI and nVidia cards.

thanks for the guide :)
i've just tried it with an 8800gts 320mb and a single 4870X2 but when trying to run the 3dmark vantage test, i get an error if i leave the desktop extended for physx

Code:

---

std::exception
SetFullscreenState failed

---

i'm running the 180.48 drivers and the 9.1 cats :shrug:

Try 181.22 WHQL drivers, everything from 18x previous to those gave me problems.

Quote:

---

Originally Posted by Pyr0

thanks for the guide :)
i've just tried it with an 8800gts 320mb and a single 4870X2 but when trying to run the 3dmark vantage test, i get an error if i leave the desktop extended for physx

Code:

---

std::exception
SetFullscreenState failed

---

i'm running the 180.48 drivers and the 9.1 cats :shrug:

---

I have exactly your hardware configuration for graphics cards Pyr0 and I just got (and fixed) this error. I had the Prerelease WDDM1.1 drivers running on my 4870X2 and the nvidia-provided WDDM1.0 drivers running on my 8800GTS 320mb. Run dxdiag and check the display tabs to verify what each of your cards is running - if your ATi card is using the 1.1's then do an update driver (if you already have either catalyst 9.1 or 9.2s installed, if not install them) and choose one of the catalyst-provided drivers from the list. Voila, vantage runs, and physx appears to be working! :D

Would be nice if more people would try this, see if there is any problems, bugs or other ways to do it.