Timing Issues with X58 Chipset? Please Help Me Test!

I've just built an i7 PC based on the Gigabyte EX58-UD5 motherboard and I'm finding that in my video capture applications, timing is inaccurate compared to my previous QX6850/P45 combination.

I'm wondering whether this is unique to my motherboard or a problem with i7 and X58 in general?

There's a simple test that I hope those with X58 boards can help me with.

1. Download VirtualDub from www.virtualdub.org - it's spyware free, doesn't require installation etc... just unzip into a standalone folder
2. Run VirtualDub.exe, go to File -> Capture AVI
3. Under Devices, select Screen Capture, and at the bottom right, next to the frame rate, select 48.00KHz, 16-bit, Stereo
4. Press F7 to do a test capture
5. Make a note of the average rate and relative rate under audio on the right and post it here

Average rate and relative rate should be at 48000Hz, 48050Hz tops. On my Gigabyte board I'm getting 48470Hz. That 1% variance ruins any attempt at precision video capture. Can any one - specifically ASUS users - try the test?

IS your CPU overclocked and BCLK oc'd? If so run everything at default and see if the variance is anywhere near as large. If the nominal value is still similar then you probably want to relax memory timings like Round-Trip Turnaround, Precharge All to Ref/Activate, Activate to Activate. You can play around with PCIE frequency as well and see if small increments by 1 or 2mhz cleans up the noise.

Just did a few tests for you.

System Specifications:
Foxconn BloodRage ( X58 Motherboard )
Intel Core i7 920 @ Stock
3GB Triple Channel Memory @ Tight timings ( 6-5-5-12 1T )
GeForce GTX 280 @ Stock
Creative SoundBlaster X-Fi Fatal1ty FPS ( PCI )
2* Mtron 3535 16GB SSDs @ RAID 0 @ ICH10R [ OS Drive & Test Drive ]
Windows 7 Ultimate Beta Build 7000 x64
Creative SB X-Fi Drivers by Daniel K
GeForce Beta by nVIDIA through Windows Update

Test 1:
VirtualDub latest beta, 1.9.0 x64
http://i42.tinypic.com/2zxrset.jpg

Test 2:
VirtualDub latest beta, 1.9.0 x86
http://i42.tinypic.com/2zxrset.jpg

Test 3:
VirtualDub latest stable version, 1.8.8 x64
http://i40.tinypic.com/rjnxn8.jpg

In test #3 everything looked like Test 1 & 2, so I decided to give the system an extra stress by running a archiving ( compression ) of a 4GB folder with WinRAR, that's when the Audio Data Rate started varying a bit.

That's wonderful, thanks for the tests. It means I don't have to bin my CPU (with the CineForm codec I am seeing 50% gains over my QX6850).

I am running the system at stock speeds by the way and changing PCIe slot speed probably won't help - this is affecting onboard devices, PCI devices and PCIe devices.

I fancy swapping in an ASUS P6T (Deluxe). Can any one run the test on their ASUS board?

I am on a DFI X58 and have been having problems with mouse skipping, video pauses, sound lag and it loses time.
I noticed when I was on my way to work and my wife told me the time and it was like 5 minutes off.
I synced the clock with internet time to correct the variance, but when I got home tonight I noticed it was off by a couple minutes again. The only way I have been able to get get the mouse/video/sound lag to go away is to put the machine into sleep mode and then wake it back up. I did find though that once I woke it back up and opened CPU-Z the CAS settings on my ram always show 4 when it was at like 9. Oh the other thing I almost forgot to mention is that I also have really poor usb performance pre windows. It is really annoying when you have to try a million things to get the damn thing to flash a bios using a pen drive.This thing is getting me really pissed off. I may have to RMA it back to newegg. I have seen reports of other users on the DFI support forum having this same issues, get a new board from RMA to see the same problems on the new board. And now I am beginning to notice the skipping trend is crossing over to other manufacturers too. Sucks I upgraded to the i7 platform to be greeted by all these ugly bugs. I felt my x24400 was a bit long in the tooth though.

Check out these links:

http://www.evga.com/forums/tm.asp?m=739506&mpage=1&key=

http://csd.dficlub.org/forum/showthread.php?t=9090

Well thats more an issue of MOBO vendors not sufficiently shielding the unique reference clock frequencies from each other. This problem isn't new and it existed with FSB too. For 48Khz frequency to be affected as you've shown then there is a good chance that BCLK frequency is creating resonance and interference with HD Audio Bus which lies on the PCI bus. PCI bus is extremely prone to this problem, and it would go a long way if Motherboard Vendors spent a bit more time isolating different frequency domains and shielding them from clock domains which have potential to interfere. Half the problem lies at the Analog clock generator, the other half is to do with insufficient shielding/isolation.

This is what you need to understand.

BCLK works off 133mhz Reference. PCI works of 33mhz reference, HD Audio off 48mhz reference, PCIE/SATA/DMI off 100mhz reference. USB off 48mhz reference.

PCI bus clock resonance will be the worst at 199mhz BCLK -+5-10mhz.
Hd AUDIO clock resonance will be the worst at 202Mhz BCLK -+ 5-10mhz.
PCIE resonance will be the worst at 200Mhz BCLK -+10mhz but PCIE can be set safely upto 120mhz or so where the ICH10R Sata ports in this case will drop out. 118Mhz is as far as I'd go.
USB clock resonance will be the worst at 202Mhz BCLK -+5-10mhz.

Now BCLK will experience the least external interference at -+ 15-25% of its reference which is 133mhz. So roughly my belief is that beyond 166mhz BCLK and before 233Mhz BCLK there exists a grey area where random things can and will happen unless the vendor design sufficiently takes this into account.

The cross chatter as it's called is born when you request a frequency which requires the Analog Clock Generator to produce similar oscillation frequencies to obtain the requested frequency that fall too close to clock domains which use a similar oscillation for their reference. To obtain 48mhz you begin with 33mhz from the crystal, and use PLL divider ratios to achieve it. The problem lies thus here, frequencies which require many PLL dividers to obtain a reference will have much more tolerance to cross chatter due to the bigger arrangement of individual reference points.

If we use 2 dividers to attain 48mhz, and we use 6 to attain a BCLK of say 200mhz where we share PLL dividers with HD Audio or USB for our requested base clock, then there is nearly certain chance that cross chatter from BCLK logical swings will interfere with the weaker fixed USB or HD audio differential clocks. The other matter is because they use such an odd reference frequency of 48MHz vendor's don't bother to put the same amount of shielding and higher grade components in as they would between the IOH, CPU, and ICH.

Bench,

Maybe you noticed as I have but Francois team at Intel no matter what CPU frequency they go for always use fairly moderate BCLK frequencies with very big multipliers. It's a minor detail most overlook, and assume because its an Extreme chip multipliers are sparse. My humble opinion is that being the ones who designed the architecture they also understand the above mentioned phenomenon and nearly always avoid it like a plague. I've never seen them mention using a BCLK above 166Mhz, it's always lower and they just raise multiplier on the CPU due to the internal PLL being more than adequate to provide enough shielding to that point.

Perhaps this was the reason the early engineering samples had stringent limitations in place to restrict BCLK below 160mhz before they made few minor PLL changes to remove restrictions and leave the responsibility of shielding to the vendors.

I have some testing ideas for further investigation on this matter, but I have to finish some review measurements first, and then I'll give them a shot and post the results ;)

Quote:

---

Originally Posted by BenchZowner

I have some testing ideas for further investigation on this matter, but I have to finish some review measurements first, and then I'll give them a shot and post the results ;)

---

I am very interested in seeing the results when you get around to it.

Quote:

---

Originally Posted by mikeyakame

Well thats more an issue of MOBO vendors not sufficiently shielding the unique reference clock frequencies from each other. This problem isn't new and it existed with FSB too. For 48Khz frequency to be affected as you've shown then there is a good chance that BCLK frequency is creating resonance and interference with HD Audio Bus which lies on the PCI bus. PCI bus is extremely prone to this problem, and it would go a long way if Motherboard Vendors spent a bit more time isolating different frequency domains and shielding them from clock domains which have potential to interfere. Half the problem lies at the Analog clock generator, the other half is to do with insufficient shielding/isolation.

This is what you need to understand.

BCLK works off 133mhz Reference. PCI works of 33mhz reference, HD Audio off 48mhz reference, PCIE/SATA/DMI off 100mhz reference. USB off 48mhz reference.

PCI bus clock resonance will be the worst at 199mhz BCLK -+5-10mhz.
Hd AUDIO clock resonance will be the worst at 202Mhz BCLK -+ 5-10mhz.
PCIE resonance will be the worst at 200Mhz BCLK -+10mhz but PCIE can be set safely upto 120mhz or so where the ICH10R Sata ports in this case will drop out. 118Mhz is as far as I'd go.
USB clock resonance will be the worst at 202Mhz BCLK -+5-10mhz.

Now BCLK will experience the least external interference at -+ 15-25% of its reference which is 133mhz. So roughly my belief is that beyond 166mhz BCLK and before 233Mhz BCLK there exists a grey area where random things can and will happen unless the vendor design sufficiently takes this into account.

The cross chatter as it's called is born when you request a frequency which requires the Analog Clock Generator to produce similar oscillation frequencies to obtain the requested frequency that fall too close to clock domains which use a similar oscillation for their reference. To obtain 48mhz you begin with 33mhz from the crystal, and use PLL divider ratios to achieve it. The problem lies thus here, frequencies which require many PLL dividers to obtain a reference will have much more tolerance to cross chatter due to the bigger arrangement of individual reference points.

If we use 2 dividers to attain 48mhz, and we use 6 to attain a BCLK of say 200mhz where we share PLL dividers with HD Audio or USB for our requested base clock, then there is nearly certain chance that cross chatter from BCLK logical swings will interfere with the weaker fixed USB or HD audio differential clocks. The other matter is because they use such an odd reference frequency of 48MHz vendor's don't bother to put the same amount of shielding and higher grade components in as they would between the IOH, CPU, and ICH.

Bench,

Maybe you noticed as I have but Francois team at Intel no matter what CPU frequency they go for always use fairly moderate BCLK frequencies with very big multipliers. It's a minor detail most overlook, and assume because its an Extreme chip multipliers are sparse. My humble opinion is that being the ones who designed the architecture they also understand the above mentioned phenomenon and nearly always avoid it like a plague. I've never seen them mention using a BCLK above 166Mhz, it's always lower and they just raise multiplier on the CPU due to the internal PLL being more than adequate to provide enough shielding to that point.

Perhaps this was the reason the early engineering samples had stringent limitations in place to restrict BCLK below 160mhz before they made few minor PLL changes to remove restrictions and leave the responsibility of shielding to the vendors.

---

Hey Mikeyakame, I was wondering if any of this could affect the system clock? I have been losing minutes over the course of one day. Also I am experiencing this @ stock settings.

I would rather check the BIOS battery first if I were you.
I know that sometimes boards leave the factory with very old batteries, or the battery contacts are bent down so that they make bad contact, leading to a faster discharge of the battery itself.
Then if you are sure that it's not the battery, some further investigation on the resonance problem would come in handy. :)
But just my :2cents: .

Quote:

---

Originally Posted by celemine1Gig

I would rather check the BIOS battery first if I were you.
I know that sometimes boards leave the factory with very old batteries, or the battery contacts are bent down so that they make bad contact, leading to a faster discharge of the battery itself.
Then if you are sure that it's not the battery, some further investigation on the resonance problem would come in handy. :)
But just my :2cents: .

---

Yeah, I already tried that a couple times as I have seen this at work from time to time.

I'm having issues finding stock of the Foxconn Bloodrage board in the UK. Could any ASUS X58 board owners please try the test in post #1 please?

In fact, anyone with a NON Gigabyte X58 board, please try the test in post #1. It'll literally take a couple of minutes and the information is worth its weight in gold to me.

This from a 920 on tpower x58, 3.8ghz (21x181) Not certain this is what you're looking for but if it's useful you're more than welcome.

http://lakesidepc.com/vdtst122.jpg

That's exactly what I'm looking for and it shows a near-exact 48000Hz, plus it's a board I can source in the UK. Many thanks. Definitely looks like the Gigabyte board is simply incompatible with my application.

Can any ASUS users *please* give it a go?

Ok here's from me, I'm using Asus P6T non deluxe...WinXP Pro 32Bit

http://img.photobucket.com/albums/v4...aldub_test.jpg

Perfect, thank you very much. That's awesome - another kick in the balls for the Gigabyte board but at least now I can buy my favourite brand.

Well I upped my RAM frequency up from 1066MHz to 1600MHz (the rated speed of the RAM) and then turned off the Turbo memory feature, and I appear to be at 48001Hz now, which is interesting. I'm not quite sure what the turbo feature does (it's under the DRAM settings so nothing to do with the CPU) but curious nonetheless.

could be an indication of a unstable system ( before )

the performance mode in dram setting is the subtimings of the ram, standard is the most relaxed one while extreme are the thightest timings.

I've just been playing with this test on my UD5

It seems to me that on my system, HyperThreading is causing the relative rate to be incorrect (starts to jump after around 10 seconds or so)
If i disable HT in the BIOS (either at stock speeds or overclocked), then the test runs just fine and the relative rate is correct and remains steady

HT On:
http://img201.imageshack.us/img201/8...dubhtonxs6.jpg

HT Off:
http://img175.imageshack.us/img175/5...tualdubic9.jpg

edit:
just noticed something in the screenshots from loonym and tot31, but not sure of the importance...
the average rates are shown as 4.6 and 2.8 fps and there are some dropped frames :shrug:

Quote:

---

Originally Posted by grandmaster

I am running the system at stock speeds by the way and changing PCIe slot speed probably won't help - this is affecting onboard devices, PCI devices and PCIe devices.

---

Quote:

---

Originally Posted by grandmaster

Well I upped my RAM frequency up from 1066MHz to 1600MHz (the rated speed of the RAM) and then turned off the Turbo memory feature, and I appear to be at 48001Hz now, which is interesting. I'm not quite sure what the turbo feature does (it's under the DRAM settings so nothing to do with the CPU) but curious nonetheless.

---

Quote:

---

Originally Posted by BenchZowner

could be an indication of a unstable system ( before )

---

immature bios...
:shrug:

Not sure how important it is to the OP, but i've just noticed in the other screenshots that there are some dropped frames. And in the ones from loonym and tot31, the average rates look rather low
:shrug:

In terms of video yes, it looks like there are problems, but relative audio is the key variable for me in these tests. Variances in video could well be down to the GPU being employed but probably won't have much to do with the system timers causing the audio issue.

I'm wondering whether the RAM issue with my board is the cause of the fact my LAN ports continually and rapidly seem to be active then inactive. I can't use the LAN ports at all and need to use a USB wireless dongle to get online, which is an inordinate pain in the arse.

Gigabyte sent me a beta F5 bios which isn't available yet but it hasn't solved anything - indeed, upgrading the BIOS actually seemed to corrupt my OS drive, though thankfully my 4TB (2x2TB) RAID array was unaffected.