warming up my cascade with DFI LP UT X58-T3EH8 and i7-920.. (230 bus speed achieved)

Printable View

Show 100 post(s) from this thread on one page

01-13-2009, 04:38 AM
Solarfall

warming up my cascade with DFI LP UT X58-T3EH8 and i7-920.. (230 bus speed achieved)

hello fellow XS members i've been playing few days with my new toys.. here are the preliminary scores that i was able to achieve.

the gear that was used:

DFI LP UT X58-T3EH8
core i7 920 patch #3841A347 so far this patch seem to be very rare picked it up from ebay
Corsair dominator ddr2 1600 mhz 3 gig triple ram kit
WD raptor
geforce 9800GTX
2 stage cascade ( build by piotres)

lets start with the bench marks shall we :D first wprime 32M good god those 8 threads are fast
http://i163.photobucket.com/albums/t...otos/5281s.jpg

next on the line we have wprime 1024M

http://i163.photobucket.com/albums/t...tos/166907.jpg

mandatory super pi 1m score.. some strange thing is happening with my system i cant run super pi 32m at any clocks. seem like i need to re-install window

http://i163.photobucket.com/albums/t...otos/08640.jpg

and finally max screen... so far

http://i163.photobucket.com/albums/t...0baseclock.jpg

here are the bios settings that i used:

DRAM Timing
Memory Control Setting: AUTO
Memory LowGap: 2048

DRAM Command Rate: AUTO/1N/2N : 1N
CAS Latency Time (tCL): 8
RAS# to CAS# Delay (tRCD): 8
RAS# Precharge (tRP): 8
Precharge Delay (tRAS): 24
REF to ACT Delay (tRFC): AUTO
Write to PRE Delay (tWR): AUTO
Rank Write to Read (tWTR): AUTO
ACT to ACT Delay (tRRD): AUTO
Row Cycle Time (tRC): AUTO
Read CAS# Precharge (tRTP): AUTO
Four ACT WIN Time (tFAW): AUTO

Voltage Setting
O.C. Shut Down Free: Disable O.C.S.D.F
CPU VID Control: 1.5=================with my Processor
CPU VID Special Add Limit: Enabled
CPU VID Special Add: Auto
Vcore Droop Control: disabled
DRAM Bus Voltage: 1.78 =============== with my Memory ( corsair dominator 1600 mhz ddr3 tri kit
DRAM PWM Switch Frequency: Reduction 15%
DRAM PWM Phase Control: 2 Phase Operation
CPU VTT Special Add: AUTO
CPU VTT Voltage: 1.55 Volt
VTT PWM Switch Frequency: Reduction 15%
VTT PWM Phase Control: 2 Phase Operation
CPU PLL Voltage: 1.80v
IOH/ICH 1.1V Voltage: 1.21v
IOH Analog Voltage: 1.20v
ICH 1.5 Voltage: 1.7v
ICH 1.05V Voltage: 1.05v
DIMM 1/2 DQ/DQSTB Bus VREF: -00.0%
DIMM 3/4 DQ/DQSTB Bus VREF: -00.0%
DIMM 5/6 DQ/DQSTB Bus VREF: -00.0%
ADDR/CMD VREF Control: Disabled
x DIMM 1/2 ADDR/CMD Bus VREF: 115
x DIMM 3/4 ADDR/CMD Bus VREF: 115
x DIMM 5/6 ADDR/CMD Bus VREF: 115
CPU QPI Drive Strength: Normal
IOH QPI Drive Strength: Normal

Exit Setup Shut down: Mode 2
O.C. Fail Retry Counter: Enabled
O.C. Fail CMOS Reload: Disabled

PPM Function: Disable
Turbo Mode Function: Disabled
1 core Max Turbo Ratio: 22x
2 core Max Turbo Ratio: 21x
3 core Max Turbo Ratio: 21x
4 core Max Turbo Ratio: 21x
CPU Non-Turbo Clock Ratio: 20x

* BCLK/UCLK/QPI Controller Settings *
QPI Control Settings: Enabled
QPI Link Fast Mode: Enabled
QPI Frequency: auto
CPU Base Clock (BCLK): 223 Mhz
Boot Up CPU Base Clock: AUTO
PCIE Clock: 103 Mhz
DRAM Frequency: AUTO
UnCore Frequency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
01-13-2009, 04:43 AM
SF3D

Great start!!!

Any vantage CPU tests yet? That will be interesting ;)
01-13-2009, 04:48 AM
Sampsa

Great results with i7-920 :up:
01-13-2009, 05:21 AM
miahallen

Good start! Keep pushing it :)
01-13-2009, 05:24 AM
Solarfall

Quote:

Originally Posted by SF3D

Great start!!!

Any vantage CPU tests yet? That will be interesting ;)

yes sir.. right after i've gotten all cpu tests category's that are in hwbot im tackling 3d benchmarks next.

Quote:

Originally Posted by Sampsa

Great results with i7-920 :up:

thanks sampsa its always nice to hear kind words from the veterans :D
01-13-2009, 05:28 AM
Viss

Very nice :up: Any luck with multi x22 ?
01-13-2009, 05:55 AM
TheKarmakazi

Great work! I was very surprised to see the bclk you were able to run wprime 1024M at!! awesome! :clap:
01-13-2009, 06:41 AM
eva2000

Nice.. ya prompting me to go back to testing for max bclk on my DFI UT X58 :)

for 32m you may need to play with subtimings i.e. tRFC and possibly more vdimm/cpu vtt ;)
01-13-2009, 06:44 AM
Solarfall

Quote:

Originally Posted by loc.o

Very nice :up: Any luck with multi x22 ?

i did even try yet. :D

Quote:

Originally Posted by TheKarmakazi

Great work! I was very surprised to see the bclk you were able to run wprime 1024M at!! awesome! :clap:

actually i did one run with 227 but right when i was saving the result the damn system crashed :down:..i will just have to push more
01-13-2009, 07:12 AM
Oliver

good work man, seems like you got a nice combo

keep pushing it
01-13-2009, 11:49 AM
Hazzan

awesome result...now we can see that board like monster ....:):)
01-13-2009, 11:53 AM
Solarfall

Quote:

Originally Posted by Oliver

good work man, seems like you got a nice combo

keep pushing it

hehe dont worry i will keep pushing it :D

Quote:

Originally Posted by Hazzan

awesome result...now we can see that board like monster ....:):)

yeah aint that the truth :up: btw thanks for the bios template that you had in your thread a while back. it helped me A LOT :bows:
01-13-2009, 09:31 PM
clon22

Awesome results!
Awesome cpu there Solarfall.
:D
01-14-2009, 04:43 AM
Solarfall

Quote:

Originally Posted by clon22

Awesome results!
Awesome cpu there Solarfall.
:D

thanks mate i know that this cpu is pretty good :up:

time for a small update.. i found today what my problem with super pi and pifast was my ram. these sticks totally :wierd: SUCK !! not even raising the ram voltage to 1.85v dont make em stable..damn it !! i think i need to start to look for another pair :down::shakes:

http://i163.photobucket.com/albums/t...pifast1827.jpg
01-14-2009, 05:04 AM
SF3D

Are you sure, that it is the ram? What VTT/uncore voltage you are using? (Measured from board)

Well.. really good tri channel kits are not so expensive.

Oh.. and very nice scores ..4.83GHz with that price is awesome!
01-14-2009, 06:14 AM
Solarfall

Quote:

Originally Posted by SF3D

Are you sure, that it is the ram? What VTT/uncore voltage you are using? (Measured from board)

Well.. really good tri channel kits are not so expensive.

Oh.. and very nice scores ..4.83GHz with that price is awesome!

well im pretty sure its the rams fault but i will have to test other vtt volts too to confirm its really the rams fault. the vtt/uncore voltages i already tested were between 1.55 and 1.63v
01-14-2009, 06:23 AM
eva2000

check your subtimings as well which you left on AUTO, hence why i was curious about memset/cpu tweaker screenshots ;)

Quote:

REF to ACT Delay (tRFC): AUTO
Write to PRE Delay (tWR): AUTO
Rank Write to Read (tWTR): AUTO
ACT to ACT Delay (tRRD): AUTO
Row Cycle Time (tRC): AUTO
Read CAS# Precharge (tRTP): AUTO
Four ACT WIN Time (tFAW): AUTO
01-14-2009, 09:44 AM
joker_x3

nice results =)
01-14-2009, 11:36 AM
Solarfall

Quote:

Originally Posted by eva2000

check your subtimings as well which you left on AUTO, hence why i was curious about memset/cpu tweaker screenshots ;)

i tested the subtimings and no go.. its like anything over 830mhz with any latency ( i even tested cl10) or voltage and the superpi gives an error at some point.. lol i guess i just have to tighten up the latencys cos this damn things just refuse to clock any higher :(

Quote:

Originally Posted by joker_x3

nice results =)

thanks mate and :welcome: to XS :up:
01-14-2009, 11:43 AM
George_o/c

Quote:

Originally Posted by Solarfall

i tested the subtimings and no go.. its like anything over 830mhz with any latency ( i even tested cl10) or voltage and the superpi gives an error at some point.. lol i guess i just have to tighten up the latencys cos this damn things just refuse to clock any higher :(

Maybe even more voltage to Rams ? I know it kinda looks like a suicide mission, but it worths a shot ... :)

BTW, great results mate, your 920 is a hell of a chip ! :eek:
01-14-2009, 11:53 AM
Solarfall

Quote:

Originally Posted by George_o/c

Maybe even more voltage to Rams ? I know it kinda looks like a suicide mission, but it worths a shot ... :)

BTW, great results mate, your 920 is a hell of a chip ! :eek:

i already tested 1.95v for the ram and it didnt help... this is sooooo weard :confused: i've never owned a kit that overclocks soo poorly :shakes:
01-14-2009, 11:58 AM
[XC] Hicks121

Wow! Sweet stuff brother!! Haha, you even gonna look back now? :p:
01-15-2009, 05:23 AM
Solarfall

Quote:

Originally Posted by [XC] Hicks121

Wow! Sweet stuff brother!! Haha, you even gonna look back now? :p:

thanks bro.. heh im still gonna keep my 775 stuff for those bench programs that use only one core.

update time. as you can see my superpi 32m time sucks cos of the memory, my dominators just cant handle higher clock speeds so there is not much i can do. i ordered a pair of new sticks today and im hoping that im able to improve my memory bandwidth by heaps.

http://i163.photobucket.com/albums/t...os/0807140.jpg
01-15-2009, 05:26 AM
PcCI2iminal

sick !!!!
congrats my friend :)
01-15-2009, 06:51 AM
Solarfall

Quote:

Originally Posted by PcCI2iminal

sick !!!!
congrats my friend :)

thanks mate i got to say this board is looking more and more impressive the more i bench with it.. when you find a setting that works its rock solid :up:

Show 100 post(s) from this thread on one page