3x1GB Micron D9GTR @DDR3-2076Mhz 8-8-8-21

High voltage benching time :)

My fastest sub 4Ghz 32M time @999.3Mhz 8-8-7-21 at 2.025v bios set vdimm

http://fileshosts.com/intel/DFI/DFI_...9s344ms_sg.png

http://fileshosts.com/intel/DFI/DFI_...pc/everest.png

Same vdimm 2.0.25v bios @1014Mhz 8-8-8-21

http://fileshosts.com/intel/DFI/DFI_...2s719ms_sg.png

http://fileshosts.com/intel/DFI/DFI_...c/everest2.png

New PB for 8-8-8-21 frequency @1026Mhz at 2.07v bios set vdimm. Compared to 920 @4410Mhz with 2x1GB Samsung HCF0 based memory @1050Mhz 9-9-9-24 at 1.875v bios set vdimm.

http://valid.canardpc.com/cache/banner/472732.png

http://fileshosts.com/intel/DFI/DFI_...8m24s438ms.png

http://fileshosts.com/intel/DFI/DFI_...pc/everest.png

Finally, max Everest benched @1038Mhz 8-8-8-21 at 2.085v

http://valid.canardpc.com/cache/banner/472746.png

http://fileshosts.com/intel/DFI/DFI_...everest_sg.png

System specs

• Intel Core i7 920 3836A756
• Thermalright Ultra 120 Extreme + LGA1366 Bolt Thru kit
• DFI LP UT X58-T3EH8 R.A51
• HIS HD4870x2 stock hsf
• 2x1GB Cellshock PC3-14400 8-7-6-21 1.9v + 1GB OCZ PC3-14400 Platinum 8-8-8-24 (3x1GB Micron D9GTR)
• 750GB Samsung HD753LJ
• Pioneer DVD-RW
• 1KW Corsair HX1000 psu
• WinXP Pro SP3 nLite fully updated

Eva2000 + Micron memory + DFI motherboards = ownage, as usual.

Awesome scores
and Nice Sticks you've got

nice eva2000...interesting test with a brand-mixed D9 memory modules....I supposed i'll do same after my winter vacation
Cool !

Nice, I just wonder how long it can survive at this voltage.. I guess its not 24/7.. :(

benching volts only

thanks guys, next up 3xGB G.Skill PC3-12800HZ Micron D9JNM from 2 kits of 2x1GB :D

http://nx.i4memory.com/reviewimages/...8_T3EH8_70.jpg

nice work Eva! Good to see the DFI board looks strong! Do you have any HCF0 chips to test cas8/cas9 max?

my initial test at http://i4memory.com/showthread.php?t=12855 are with 2x1gb corsair ddr3-2133c9df samsung hcf0, haven't got a proper triple channel hcf0 to test.

3x1GB D9JNM aren't performing that well in tri channel so far compared to mixed D9GTR as they can't do DDR3-1600 8-8-8-24 at 1.65v like D9GTR can. Also these D9JNM default SPD is very very tight for tRFC i.e. almost 1300+ MB/s more bandwidth at DDR3-1600mhz 8-8-8-24 in memtest86+ at same clocks a D9GTR (which had loose SPD). More testing heh

great work my friend, looks like u got it huh

keep pushing it

Hey Eva,

If you get the time and the G.Skill HZ's start clocking for you.
Can you tell me if running them in tri holds them back next to dual.

I'm using the same HZ dual channel kit, and am thinking about picking up another to run tri like you above.
Running dual channel on a UD5, they will SPI32M @ 1043Mhz 8-7-7-20 1T.

Quote:

---

Originally Posted by Oliver

great work my friend, looks like u got it huh

keep pushing it

---

thanks.. i just pulled off 920 @4610Mhz air cooled 32M pi 7m 54s :D - screenies coming soon gotta run other benches :)

Quote:

---

Originally Posted by Deanzo

Hey Eva,

If you get the time and the G.Skill HZ's start clocking for you.
Can you tell me if running them in tri holds them back next to dual.

I'm using the same HZ dual channel kit, and am thinking about picking up another to run tri like you above.
Running dual channel on a UD5, they will SPI32M @ 1043Mhz 8-7-7-20 1T.

---

well the thing is HZ in dual channel on X48 run DDR3-1800 8-8-8-24 fine too so could be just not liking tri - maybe next DFI bios will help ?

Very nice mate, good for GTR for sure. That DFI board seems to be going quite well.

thanks, updated to 12/31 beta bios so will recheck this :D

We are drooling over your results. Care to share that 12/31 bios?

Oops, found it in one of your other posts. Many thanks!