Biostar X58 Core I7 920 @ 4545MHz (my first try on air)

I received this motherboard this night from Biostar and I haven't test this board much yet but I'm really impressed with Tpower X58 , everyone wants high fsb and stable,don't doubt, this X58 is really good so far ^^
I can get into windows at 215 with low voltages but i can not reach more than 217 ,wrong settings maybe ,i need to tweak a bit more ^^

Here a quick run on air

http://img72.imageshack.us/img72/1/4...tarcpuzvd7.jpg

Wprime 32/1024 @ 4450MHz
http://img387.imageshack.us/img387/1...rimemb3.th.jpg

Pifast/winrar @ 4500MHz
http://img168.imageshack.us/img168/5...nrarww5.th.jpg

SuperPi-Sandra @ 5520MHz
http://img387.imageshack.us/img387/4...agemva0.th.jpg

3d(HD4870X2 @ 840/1000MHz)

3d05 @ 4450MHz
http://img387.imageshack.us/img387/7...0mhzje0.th.jpg

3d06 @ 4450MHz
http://img387.imageshack.us/img387/3...0mhzgl2.th.jpg

youtube -> 3d06
http://jp.youtube.com/watch?v=yA6mF7yC1x0


Retail Core I7 920 (Thermalright Ultra 120 Extreme 1366)
Biostar Tpower X58
3 x 1gb Adata 1600MHz
HD4870X2 (840/1000MHz)
Thermalright Ultra 120 Extreme 1366 + San Ace 102CFM
Room Temp @ 15c

Intel SpeedStep Tech - Disabled
Ratio CMOS Setting - 21
CPU Frequency Setting - 200
QPI Link Speed - Full Speed
DRAM Frequency - 1600MHz
Command Rate - 1T
>Intel PPM/Turbo Mode Configuration
Intel SpeedStep - Disabled
Intel C-State tech - Disabled

>DRAM Timing Configuration
Ch A/B/C DRAM Misc Timing - SPD
DRAM Timing Control - SPD

>Clock Gen Configuration
PCIE Clock by - Manual
PCIE Frequency Setting - 100
CPU Clock delay - No delay
MHC Clock delay - No delay

>All Voltage Configuration
CPU Vcore - +0.300v
CPU VTT - Auto (1.408v)
CPU PLL - Auto
DRAM Voltage - 1.84v
NB VCC - Auto (1.104v)
SB VCC - Auto
QPI/PCIE PLL - Auto

LN2 soon

Wow, that's nice! Can't wait to see some ln2!

Very nice :up::clap:

fix your SuperPi-Sandra @ 5520MHz Cuz i dont se any 5520mhz there mate ;)

Today i play to just testing for fun

http://img120.imageshack.us/img120/7...dmark06lc2.jpg

only with my geforce 260 gtx and cold air in my room =)

Quote:

---

Originally Posted by PytonOrm

fix your SuperPi-Sandra @ 5520MHz Cuz i dont se any 5520mhz there mate ;)

Today i play to just testing for fun

http://img120.imageshack.us/img120/7...dmark06lc2.jpg

only with my geforce 260 gtx and cold air in my room =)

---

you cpu score isnt good, enable HT


And Nice one PcCI2iminal , now i m not just alone to post some result about this board.

Nice PC, but not sure why but imageshack links not all images seem to show up when i view them - happens with other folks who use imageshack as well ?

Quote:

---

Originally Posted by Pt1t

you cpu score isnt good, enable HT


And Nice one PcCI2iminal , now i m not just alone to post some result about this board.

---

Okey :up:Thanks dude =) i will try enable HT on

thx you guys :)

Quote:

---

Originally Posted by eva2000

Nice PC, but not sure why but imageshack links not all images seem to show up when i view them -happens with other folks who use imageshack as well ?

---

here is the same George

Quote:

---

Originally Posted by Pt1t

you cpu score isnt good, enable HT
And Nice one PcCI2iminal , now i m not just alone to post some result about this board.

---

thx for all Thomas and now you are not alone in the boat :)

:up: nice 920 chip u have man
waiting for ln2 test? :D

Nice board my friend, have fun :up:

Quote:

---

Originally Posted by PcCI2iminal

thx you guys :)

here is the same George

---

figured out how to view them on the page click 'Show Adv Links' and click the image link to http://img387.imageshack.us/images/external.png :)

What batch is your 920 ? My 920 3836A756 doing similar on TRUE120 air :)

http://valid.canardpc.com/cache/banner/471545.png

http://fileshosts.com/intel/DFI/DFI_...8m19s344ms.png

http://fileshosts.com/intel/DFI/DFI_...-900_27360.png

Quote:

---

Originally Posted by hiwa

:up: nice 920 chip u have man
waiting for ln2 test? :D

---

thx man
i need to wait one more day
:)

Quote:

---

Originally Posted by loc.o

Nice board my friend, have fun

---

thx Bart
and yes,its a nice board ,the new Biostar dynasty just began :)

Quote:

---

Originally Posted by eva2000

figured out how to view them on the page click 'Show Adv Links' and click the image link to

---

a single click on the thumbs like before was better :( hehehehe

Quote:

---

Originally Posted by eva2000

What batch is your 920 ? My 920 3836A756 doing similar on TRUE120 air

---

nice 920 :) and of course nice DFI ^^
max bclock?
EDIT
18x219.6Bclk - 19x219.6Bclk

for 32m
great :)



my 920 ->batch 3838A548 :)

Quote:

---

Originally Posted by PcCI2iminal

nice 920 :) and of course nice DFI ^^
max bclock?

my 920 ->batch 3838A548 :)

---

So 2 weeks newer heh

Yeah so far at 220bclk bios = 219.6 real heh

19x219.6Bclk

http://fileshosts.com/intel/DFI/DFI_...8m48s781ms.png

http://fileshosts.com/intel/DFI/DFI_...33/everest.png

http://fileshosts.com/intel/DFI/DFI_...-900_26186.png

very impressive George :)

and great RAM clock

http://fileshosts.com/intel/DFI/DFI_...9m22s953ms.png

I can not reach that speed ....not now ....cz only two ram dividers(2:8 max) are available on Biostar X58 :S
I was talkin with Thomas about it and he said the same ,only two dividers is available for him but his 920 is an ES and its locked , my 920 has all dividers unlocked(tested on R2) ,bios issue maybe i dunno :(
I will report it and i hope they can fix soon :)

Time for some changes :) and still on air

CORE I7 940 ES C0

Boot @ 220

http://img123.imageshack.us/img123/3...fsbbootwf2.jpg
http://img412.imageshack.us/img412/6959/61959860if5.jpg

222 good for Pi1m

http://img412.imageshack.us/img412/4336/222fsbtz7.jpg


Core I7 940ES
Biostar Tpower X58
3 x 1gb Adata 1600MHz
HD4870X2 (840/1000MHz)
Thermalright Ultra 120 Extreme 1366 + San Ace 102CFM
Room Temp @ 15c

(12-10-2008 bios)
Intel SpeedStep Tech - Disabled
Ratio CMOS Setting - 12
CPU Frequency Setting - 220
QPI Link Speed - Full Speed
DRAM Frequency - 1320MHz
Command Rate - 1T

>Intel PPM/Turbo Mode Configuration
Intel SpeedStep - Disabled
Intel C-State tech - enable
C State package limiting seting - Auto
C1 Auto Demotion - Enable
C3 Auto Demotion - Enable

>DRAM Timing Configuration
Ch A/B/C DRAM Misc Timing - SPD
DRAM Timing Control - manual(8-8-8-19)

>Clock Gen Configuration
PCIE Clock by - Auto
PCIE Frequency Setting - (100)
CPU Clock delay - No delay
MHC Clock delay - No delay

>All Voltage Configuration
CPU Vcore - +0.020v
CPU VTT - 1.55v
CPU PLL - 1.8v
DRAM Voltage - 1.65v
NB VCC - 1.210v
SB VCC - Auto
QPI/PCIE PLL - 1.28v

Really awesome! I will get my i7 system tomorrow.

Yeah ram clocking on DFI is sweet... nearly as sweet as your 940XE (ES) unlocked multi cpu :D

Can you download memset 4.0 beta2 so we can see what sub timings are like. Thanks

edit 4.0 beta 3 is out http://www.xtremesystems.org/forums/...postcount=1110

Pretty nice Board and Tests Junior :)

Do you know if Intel will acually sell those 940 XE?

Quote:

---

Originally Posted by eva2000

Yeah ram clocking on DFI is sweet... nearly as sweet as your 940XE (ES) unlocked multi cpu :D

Can you download memset 4.0 beta2 so we can see what sub timings are like. Thanks

edit 4.0 beta 3 is out http://www.xtremesystems.org/forums/...postcount=1110

---

here is another unlocked 940 and the max bootable is 210fsb and multipliers from 12x to 18x is a no go with high fsb :S

http://img254.imageshack.us/img254/7178/imagem3vj7.jpg

Quote:

---

Originally Posted by metro.cl

Do you know if Intel will acually sell those 940 XE?

---

Core I7 940 Black Edition?
I don't know Felipe :(

unlocked 940 + Biostar
http://img141.imageshack.us/img141/6...locked1xo0.jpg

works like an Extreme
uncore clock,qpi link ,ram dividers but not the cpu multiplier :(
i can set any cpu multi but nothing over than 22x will work :( ,maybe a new bios can fix it ^^

maybe try loosening trfc from 59 to 72 or 88 and see if you can get higher ?

Quote:

---

Originally Posted by eva2000

maybe try loosening trfc from 59 to 72 or 88 and see if you can get higher ?

---

thx George but I've tried with no luck hehehe this chip is little different I need to find a good multiplier to fly on fsb ;) and the max is
214 with 21x :S

http://img262.imageshack.us/img262/7...ar940xesw1.jpg

low voltage 1.28v

http://img240.imageshack.us/img240/2...4230mhzwq1.jpg

high voltage 1.6v

http://img511.imageshack.us/img511/8...biostarom3.jpg

I found the problem and now 25x is workin hehehehe

http://img511.imageshack.us/img511/1315/fixed2zj4.jpg

Biostar X58 is very funny to play :)

Edit

all air and room temp @ 20c

nice low volts.. what was the fix for 25x ?

Quote:

---

Originally Posted by eva2000

nice low volts..

---

low vcore is so sweet hehehe and i think with that chip i can hit 5Ghz or more ^^

Quote:

---

what was the fix for 25x ?

---

if I set the multi at O.N.E. clocking navigator(main screen) will not work and any multi higher than 22x will be locked at 22x so i use the Turbo mode configuration and then can be manually managed and everything works fine ^^

Quote:

---

if I set the multi at O.N.E. clocking navigator(main screen) will not work and any multi higher than 22x will be locked at 22x so i use the Turbo mode configuration and then can be manually managed and everything works fine ^^

---

with First bios on sample board board i had to do also that on 965xe , i had Max multiplier of 24X via ONE , and i had to change max multiplier in turbo Boost menu. I think it s easy to fix on 940 B0.