road to 5Ghz with non extreme I7

Mojo Family
We are going to buy some Ln2 in a big Gas Company near of home and our son Adrian will meet the LN2 for the first time in his life hehehehe
http://img249.imageshack.us/img249/6404/011oi8.jpg

I never seen before ,its about three tanks with 60000Lt of LN2 but i have no money to blow .... well ,a small part is enough for us ->20lt :D
http://img360.imageshack.us/img360/5476/024hu5.jpg

The tests
http://img360.imageshack.us/img360/2424/025nb5.jpg

Ladies first and Yoko plays Core I7 920 (retail)

http://img204.imageshack.us/img204/1770/86916405gl1.jpg
http://img512.imageshack.us/img512/1...puqueendp2.jpg
http://img512.imageshack.us/img512/5...nuclearxx8.jpg
http://img412.imageshack.us/img412/9...0wprimerb5.jpg
http://img412.imageshack.us/img412/2...mhz3d06ye5.jpg

cpu score 4500MHz HT off
http://img116.imageshack.us/img116/8...orehtofcx2.jpg

MB - Asus Rampage 2 Extreme
CPU - Core I7 920 retail
RAM - Adata 1600+ 1gb x 3
Cooling - LN2
Pot - Chilly1 LN2/Dice conteiner
Fan - San Ace 120x120x38 102CFM on NB ,Scythe 92x92x25 3800rpm 73.6CFM on RAM
VGA - Sapphire HD4870X@ (asus top bios) 3D06 ->Core @ 840/1000MHz
PSU - Giga-EZ 1000w
HDD - Hitachi 40GB 7200
Room temp - 22c



AI overclock - manual
OC from CPU level up - auto
OC from Memory level up - auto
CPU Ratio setting - auto

CPU configuration
CPU Ratio Setting - auto
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - enable
Execute Disabled bit - disabled
Intel HT Technology - enable
Active Processor Cores - all
A20M - disabled
Intel Speedstep tech - enable
Intel Turbo Mode tech - enable
Intel C-STATE tech - disabled

BCLK frequency - 200
PCIE frequency - 100
DRAM frequency - DDR3 1603MHz
UCLK frequency - 3208MHz
QPI frequency - auto

Dram timing control
1st iformation - 7-7-7-24-5-88-14-6-24-8
2nd information - 1N-57-53-53
3rd information - 8-8-18-8-8-8-7-6-4-7-7-4

EPU II phase control - full phase
Load-line calibration - enable
CPU differential amplitude - auto
Extreme OV - disabled

Current voltage 1.608v - 1.812v - 1.35v
Cpu voltage - 1.65v
CPU PLL voltage - auto
QPI-Dram voltage - auto

Current voltage 1.51v - 1.508v - 1.111v - 1.508v
IOH voltage - 1.53
IOH PCIE voltage - auto
ICH voltage - auto
ICH PCIE voltage - auto

Current voltage 1.898v
DRAM Bus voltage - 1.9v
>DRAM REF voltage - auto

Debug mode - string
Keyboard TeakIt comtrol - disabled

CPU spread spectrum - disabled
PCIE spectrum - disabled
CPU clock skew - auto
IOH clock skew - auto

And me :D

Well i had no much LN2 left ,just enough for few runs and a screen

http://img444.imageshack.us/img444/3313/4775pimw2.jpg
http://img368.imageshack.us/img368/8...5pifastcn0.jpg

I was so close to 5GHz :(

http://img341.imageshack.us/img341/9...mhzcpuzjz6.jpg

I will try again at later time ^^

MB - Asus Rampage 2 Extreme
CPU - Core I7 940 ES
RAM - Adata 1600+ 1gb x 3
Cooling - LN2 (5lt)
Pot - Chilly1 LN2/Dice conteiner
Fan - San Ace 120x120x38 102CFM on NB ,Scythe 92x92x25 3800rpm 73.6CFM on RAM
VGA - Savage 32mb PCI
PSU - Giga-EZ 1000w
HDD - Hitachi 40GB 7200
Room temp - 22c



AI overclock - manual
OC from CPU level up - auto
OC from Memory level up - auto
CPU Ratio setting - auto

CPU configuration
CPU Ratio Setting - auto
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - enable
Execute Disabled bit - disabled
Intel HT Technology - enable
Active Processor Cores - all
A20M - disabled
Intel Speedstep tech - enable
Intel Turbo Mode tech - enable
Intel C-STATE tech - disabled

BCLK frequency - 200
PCIE frequency - 100
DRAM frequency - DDR3 1603MHz

Dram timing control
1st iformation - 7-7-7-24-5-88-14-6-24-8
2nd information - 1N-57-53-53
3rd information - 8-8-18-8-8-8-7-6-4-7-7-4

EPU II phase control - full phase
Load-line calibration - enable
CPU differential amplitude - auto
Extreme OV - disabled

Current voltage 1.680v - 1.812v - 1.35v
Cpu voltage - 1.70v
CPU PLL voltage - auto
QPI-Dram voltage - auto

Current voltage 1.468v - 1.508v - 1.111v - 1.508v
IOH voltage - 1.510v
IOH PCIE voltage - auto
ICH voltage - auto
ICH PCIE voltage - auto

Current voltage 1.905v
DRAM Bus voltage - 1.908v
>DRAM REF voltage - auto

Debug mode - string
Keyboard TeakIt comtrol - disabled

CPU spread spectrum - disabled
PCIE spectrum - disabled
CPU clock skew - auto
IOH clock skew - auto

Good Job Criminal ^^ :up:

4870's@over - adrenaline. :rolleyes:

exellent clocks !

and even better family action:up:

superb family actiond:D
my girl likes that little human:p:

Very nicely done!!...I really need to get my wife into overclocking :(

WoW.... nice job. :D nearly 5Ghz. :cheer::cheer::cheer::cheer::cheer::cheer: :clap:

Well done PcCI2iminal and Yoko. It's nice to see someone is close 5GHz with non-extreme i7. Keep pushing, your family rocks :up:

Nice to see all this :up:

Damn your son is a lucky bast... :D :D not unhandy by the way!!

Thanks for sharing settings and no need to say keep pushing:)

:clap:

Wow. Nice clocks and great team work, it seems! :up:
Most of the XEs have to fight hard to get to 4.9GHz... should be a really nice 940 IMHO.

amazing clocks on the 940!! You can hit 5Ghz, keep pushing!!!

Wow, I am speechless ! :yepp: Best family o/cing action I've ever seen :clap: :up:
5GHz are coming, I can smell it :p:

Great pictures and clocking my friend. :up:

Nice clock here on 920 & 940 :)

Very nice!!!

It seems Adrian brought more oc power for family! ^^

Fantastic results, and family!:yepp: My friend, you are very lucky!

well done ! PcCI2iminal :up:

looking forward for next results i think you can beat 5GHz on 940 sure ;)

Cheers :up:

thanks guys (from me , yoko and adrian heheh)

I will try agaio to hit the magic5 with a non extreme chip and the next time and i will use more ln2 than only 5lt maybe 60000lt hehehe

congrats.

That is some very nice clocks:clap:

5GHz is very near:up:

hey man that 920 you have is a killer chip
when we were comparing notes the other day i was like WTF that's pretty good....hehehe


i managed to get some half decent results with my chip..... took a screen at 4485MHz on water and maxing out at 221MHz bus speed for 4644 full bench stable 222 >> BSOD stable...erm yeah :rofl:

good job :)

Quote:

---

Originally Posted by Brian y.

congrats.

That is some very nice clocks:clap:

5GHz is very near:up:

---

thx guys , im working on it but those few Mhz seems much bigger than only 42MHz ....

Quote:

---

Originally Posted by dinos22

hey man that 920 you have is a killer chip
when we were comparing notes the other day i was like WTF that's pretty good....hehehe


i managed to get some half decent results with my chip..... took a screen at 4485MHz on water and maxing out at 221MHz bus speed for 4644 full bench stable 222 >> BSOD stable...erm yeah :rofl:

---

mine is good for air but i forgot to say to you it has a low cold bug (-30) ,anyway i don't think is possible to hit 222MHz ,not with Rampage2 ,Gigabyte maybe?
what you know about the GA-X58-DS4 ?what the Gigabyte engineers said to you about the DS4?

i dont know what the difference is tbh

Quote:

---

Originally Posted by dinos22

i dont know what the difference is tbh

---

thx,i will try Gigabyte again , DS4 or DS5 but i dunno heheheh
the cheapest maybe :D