Printable View
Any tips for getting a q9550 overclocked on this board. It seems to not want to take anything off "auto" or it will not post. I just upgraded from a e6600 that overclocked pretty good on the older BIOS revisions but only decent on the newer ones (needed for the q9550). BIOS 1503. Running 350 * 8.5 right now.
These settings worked on my Striker board, though with the latest biosses 45nm Quad overclocking was pretty poor...booting fine but very unstable in windows... sad to say but these are not the boards to be using a quad CPU on...
AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled
FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1600 (means 400FSB)
Actual FSB (QDR), Mhz: 1600
MEM (DDR), Mhz: 800 (means 400mhz speeds)
Actual MEM (DDR), Mhz: 800
Vcore Voltage:1.4
Memory Voltage:2.0
1.2v HT Voltage:1.55
NB Core Voltage:1.45
SB Core Voltage:1.55
CPU VTT Voltage:1.35
DDRII Controller Ref Voltage:AUTO
DDRII Channel A Ref Voltage:AUTO
DDRII Channel B Ref Voltage:AUTO
tCL (CAS Latency): 5
tRCD: 5
tRP: 5
tRAS: 18
Command Per Clock (CMD): 2 clock (2T)
Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: 42
Async Latency: AUTO
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled
CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x
PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200
Will just about any Abit/DFI/Asus/Gigabyte/MSI P35 board do better? I might be able to swing a board but already shouldn't have purchased the processor ;) I say $125 tops with whats local at Fry's.Quote:
Originally Posted by Leeghoofd
BTW whats the earliest BIOS that runs the Quad 45nm chips? It wouldn't do half multipliers on 1302 (what i had before updating) so when it did boot it was like 2Ghz. At least I'm getting stable stock speed now ;)
Yep mate, any decent P35 mobo will clock that quad better than the 680 chipset from Nvidia... and will be more reliable in the long run too...
I loved my Asus P5K Dlx, gigabyte P35 DS4...
think this MSI will do nicely : http://shop4.frys.com/product/564764...H:MAIN_RSLT_PG
Or at the Egg they got these Open box mobo's :
P5K Premium : P5K Premium
P5K Dlx, DFI P35, all around ya budget mate
I was under the impression that the 680i chipset didnt "officially" support 45nm quads.....well according to Intel anyways?
Well that's true, but they work fine at stock speeds on my Striker but once you start to OC you run into trouble. Same with P45, Asus labels the boxes with 1600FSB while Intel tech sheet only warrant 1333 speeds...
The OP better avoid headaches and buy another board...to clock that quad
lol I even forgot this was 680i
I got this board
http://www.xtremesystems.org/forums/...d.php?t=187915
Didn't even try just set to 400FSB 1.325v and its up and running stable. Don't have time to tweak right now.
Good choice mate !! hope it stays with a long time... keep us posted how it goes after some tweaking...
Just an idea where I'm at right now still testing stability (its still running). BIOS vcore is set to 1.325.