Project Frosty Postal (UPDATED)
Iv been above ambient for way too long!
Anyone following my rencent threads will be aware i'v been planning a water chiller. So here are the components!
Compressor:
Teco Rotary. 10000BTU 12.2cc 0.9HP
Condenser
10" x 10" x 2" unit that came in ac.
2x 106CFM Papst 240v Fans
(The turbine coolng the condenser is pushing about 500cfm and sounds like a vacuum cleaner running)
Spun Copper filter drier.
6' 0.031" Capillary line (Needs at least 9')
12 Plate Heat exchanger
3/8" Suction line (cap tube coiled round)
R134a
http://img102.imageshack.us/img102/7...0243gl1.th.jpg
http://img384.imageshack.us/img384/7...0239fj4.th.jpg
http://img176.imageshack.us/img176/1...0241gm6.th.jpg
http://img103.imageshack.us/img103/1...0240bi3.th.jpg
http://img172.imageshack.us/img172/7...0238yp1.th.jpg
http://img80.imageshack.us/img80/441...0237vc3.th.jpg
http://img76.imageshack.us/img76/858...0236km0.th.jpg
Laing D5
Swiftech Apogee (Release edition)
MCW60
MicroRes.
Lots of vaseline and insulation courtesy of work ;-)
Im missing charging lines. The tubing that will connect to my WC setup. And my suction line. oh and a purging gas. So If ExoCarlos pulls off his chilled water in a day, i'll be paying him a visit for the use of some equipment ;) ;) (ok carl?)