Printable View
So since there wasn't one of these I figured I would start it. :)
This is my first oc above 790 and I have great results. I have yet to receive my 2nd 4870 back from RMA so I will definitely have some more additions to this thread :D
http://gpuz.techpowerup.com/08/07/05/hy0.png
http://img399.imageshack.us/img399/6158/x4011pb9.jpg
ORB link for comfirm and other system specs
Note: Others to post please follow this format, you do not have to use extreme preset but you get the picture
Could you tell me about the used softwares? I edited every clock with RBE but GPZ-U still show 750Hmz and my 3dMark score proof is. (Sapphire 4870) Should I uninstall CCC?
I just installed a GeCube 4870 and would also like to know what software to use to flash this baby.
My last bios flash was for the 8800gts 320.
Can't wait to oc this past 790
thanks
ps this is my first ati card ever, since the days of wolfenstien 3d
hopefully we wont have to wait long for some tools to come along ....used the gfx cooler fix atm to keep temps a bit lower
Hi Sniipe Dogg. Was all this on stock volts and stock cooler? Did you change thermal paste at all? What was fan speed at? Temps for idle/load at those settings?
As well, what did you do to thoroughly test the card for stability and artifacts? Have you tried higher? How does the card respond exactly when it becomes unstable?
Sorry for the myriad of questions, just very curious is all as I have my eyes set on this card. Thank you.
Here's mine so far, have gotten it running higher but the heat's high at 870/4500...
http://img381.imageshack.us/img381/7...4870oc2rb4.gif
I don't own Vantage, so I can't post a bench of that. I have thoroughly tested the card for stability and whatnot, though. This is all on the stock cooler with no thermal paste change, 46-47c idle. Fan speed is at 37% for idle (at 49c it turns up), and 45% then, 54% at 55c, with the rest of the profile set to high temps that it doesn't reach. When it becomes unstable it just makes a kind of squarish artifact grid full-screen, for a split-second, and then the display goes black.
well, i'm really tempted to use rbe again but i dont want to have the card running with max volts in 2d.... its just not going to be healthy imo... i might be wrong....
as soon as we know which clocks effect which state, i'll be pushing my cards again....
by the way, if you've worked some of these out, let me know..... thanks in advance....
you must first flash to stock bios, the uncheck ati overdrive, then flash to the OC'ed clocks and you should be all setQuote:
Originally Posted by janos666
Stock volts, stock cooler. MX-2 on the GPU. fan profile set through graph: low=40 high=70 minfan%=20. I am about to try higher in the next 30 mins or so. It hasnt become unstable yet so i have no idea how it responds :DQuote:
Originally Posted by cantankerous
stock cooler gives me load temps of 50CQuote:
Originally Posted by Dragy2k
the voltage never changes evwen in stock bios and 2d clocks, all your changing is a slight amount and its not like the gpu is running at load all the time so your not getting a ton of heat ;)Quote:
Originally Posted by purecain
here is the newest result, i will add my performance score in like 20 mins
http://gpuz.techpowerup.com/08/07/05/df2.png
http://img387.imageshack.us/img387/3742/x4157mt6.jpg
http://service.futuremark.com/compare?3dmv=215656
Performance preset:
http://img157.imageshack.us/img157/8107/p9894to1.jpg
http://service.futuremark.com/compare?3dmv=215700
pretty impressive.
So this is all at stock voltage? Has anyone measured the actual vGPU? It's listed as 1.263v in the BIOS.
i am borrowing a very accurate multimeter (6 decimal accuracy) on monday or tuesday so i will test then :)Quote:
Originally Posted by gurusan
as far as i know these are stock volts 100% I can't wait to volt mod though :D
Is it possible to see some benchmarking from games, before and after overclock?
Check out my thread here (http://www.xtremesystems.org/forums/...d.php?t=192654) and at hardforum (http://www.hardforum.com/showthread.php?t=1319500) for some benches before/after between a couple of overclocks.Quote:
Originally Posted by Zehnsucht
After seeing the results here I tried my 4870 at 840mhz and it did it easily:
http://img56.imageshack.us/img56/592...z840oa9.th.jpg
Sorry, no 3Dmark results as I don't usually bother with those. I did see a nice jump in ingame framerates though, much more then I was expecting.
I don't think I will push it much more until 3rd party OC tools and waterblocks are available though.
I strongly suggest that you all test for artifacts with ATI tool, this ram is only specced to run at 4ghz. When I run at 1050 or even 1020 I get artifacts and if your card is in fact artifacting you are slowly killing the RAM. now I am back at 1000 and I get no artifacts after 45 mins of artifact test.
I get no artifacts on the ram at 1100 or 4400, whatever you wanna call it, I teste with ati tool for about 15 mins and no errors, I believe it is the heat that might give you artifacts on at those speeds, but this ram seems to be perfectly capable of 4400, I set my fan speed at 37% and it idles at 49-50c and never breaks 62c under load. I have it running at 840/1100 with the bios flash and fan speed edited. at 850 I did get artifacts in crysis only at very high, so now at 840 I do not get any artifacts. here is a vantage screenshot with my gpu at 840/1100, and q9450 at 3680mhz.
http://img378.imageshack.us/img378/7...vantagelz3.jpg
lol I tried the medusa demo crack and it actually worked but half way through I started getting glitches.
...waterblocks are available for a long long time, since you can use the same as for the x19xx and HD38xx series. I find the best performance/value ist the Zalman ZM-GWB3 in combination with MX-2 thermal paste.Quote:
Originally Posted by Solus Corvus
^aluminum FTL!
anyway any decent waterblock does a great job. I'm using a maze4 and get 24c Idle 32c load at 1.35v 820mhz
http://img78.imageshack.us/img78/2128/img3342ma7.jpg
Overclock 4800 with the last version of AMDClockTool :up:
link : http://www.overclex.net/data/images/...cktool-9.8.rar
credit : http://translate.google.fr/translate...&ie=ISO-8859-1
AWESOME! Thanks for that abeljemka
awesome news spreading it now...Quote:
Originally Posted by AbelJemka
doesnt work on vista64...
I'm using Server 2008 64 and it works fine
right click , run as administrator.