Perhaps, it is modPi 8M WR : 01m40.750s by E8500 & TP45 HP

Thank you so much for your advice, Team.AU ! :toast: :toast: :toast:

modPI 8M : 1m40.750s @5932.2MHz (FSB624.4MHz x 9.5)
http://homepage2.nifty.com/NewBeetle..._5.93G_Bio.png

Setup
http://homepage2.nifty.com/NewBeetle/LN2_8M.jpg

M/B: BIOSTAR TP45 HP Ver.5.0 Vcore-mod (BIOS:P45BA624.BST)
M/B Bed: V-TEC ARC Bed Rev.5.3
CPU:Core2 Duo E8500 Q813A227#1(2V81209)
CPU cooling:MaxxNeo + LN2 / Temp:-135C
Chipset Cooling: Tara-chan 1st + LN2 / Temp:-50C
Mem:Team PC2-8500 C4 1GB x2
VGA:MSI NX7900GTO 512MB PCI-EX
HDD:Maxtor 6Y080P0 (IDE)
PSU: SilverStone OP1200
OS: Windows Server 2003
Tools: SetFSB / Memset3.5 / P965StrapTweaker(04-10-03-22-08) / ERAM2.11 / AutoGear

[BIOS SETUP]　O.N.E
Over-Clocking Navigator [Manual OverClock]
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×8
CPU Frequency Setting : 570
Over Clock Retry Count : 2
FSB(Bsel) To NorthBridge Latch : AUTO
DRAM Frequency : DDR2-1140
DDR2 Enhance Mode : Enabled

DRAM Timing Configuration
DDR2 RCOMP Configuration : Configuration 4
Static tREAD Value : Auto
Configure DRAM Timing by SPD : Disabled (4-4-4-10-6-26-4-4-4)

Clock Gen Configuration
PCIE Frequency Setting : 100
CPU Clock Skew Control : 200ps
(G)MCH Clock Skew Control : 100ps
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : +0.6000v (Actual:1.87V)
DDR Voltage : +0.700v (Actual:2.67V)
Chipset Voltage : +0.350v
FSB Voltage : +0.350v
CPU Core1 GTL Ref Voltage : 0.63*VTT
CPU Core2 GTL Ref Voltage : 0.67*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.6v

Very nice. Guys over at another forum I belong to have been playing around with 8m recently so this thread caught my eye. NewBeetle-san, congrats!!

Good job NewBeetle-san. :clap:
Keep pushing :up:

another amazing result Mr.NewBeetle !!!

Great result with more cheaper mainboard this is the just overclocker philosophy.
My compliments NewBeetle! :clap::clap:

Congrats NewBeetle , well done :clap:

sugoi!! :o

Great work! :clap:
Very detailled setup info as usual, handsome gesture to share this :up:
If you use ERAM, what size? Thx!

Nice one NewBeetle :D

I also put E8500 on it , But only under cascade .... i hope to get some LN2 in those days.

http://www.xtremesystems.org/forums/...7&postcount=21

Very nice score NewBeetle!!:clap:

Congratz

When I'm close limit ram I loose point spi if use eram. Isn't 624 4.4.4. Limit of yours ram?
I see maxmem set expressly spi8m:)

Congrats NB san, you always reach the best with all hardware :up:

Sweet work champ and congrats...

Seems like ur doing great ;)...

Keep pushing it.

Thank you so much,

rdrash-san,

xwards-san,

Benny Lodewijk-san,

chispy-san,

Tuvok-LuR-san,

Oliver-san.

:toast: :toast: :toast:

Quote:

---

Originally Posted by pippo369

Great result with more cheaper mainboard this is the just overclocker philosophy.
My compliments NewBeetle! :clap::clap:

---

Thank you, pippo369-san. :)
Yes, this is my OC philosophy. :D

Quote:

---

Originally Posted by Hyperhorn

Great work! :clap:
Very detailled setup info as usual, handsome gesture to share this :up:
If you use ERAM, what size? Thx!

---

Thank you, Hyperhorn-san. :)
ERAM size=393216KB
MAXMEM=256MB
pagefile=512MB

Quote:

---

Originally Posted by Pt1t

Nice one NewBeetle :D

I also put E8500 on it , But only under cascade .... i hope to get some LN2 in those days.

http://www.xtremesystems.org/forums/...7&postcount=21

---

Your E8500 seems very good! :eek:
If you use LN2, I will get many WRs!!!!! :up:

Quote:

---

Originally Posted by gandalfone

Very nice score NewBeetle!!:clap:

Congratz

When I'm close limit ram I loose point spi if use eram. Isn't 624 4.4.4. Limit of yours ram?
I see maxmem set expressly spi8m:)

---

My ram CL4 limit is 640MHz @ 1M, 630MHz @ 8M. :cool:
But my ram cannot work @ 32M at all..... :(

Quote:

---

Originally Posted by LardArse

Congrats NB san, you always reach the best with all hardware :up:

---

Thank you always, LardArse-san. :)
I tried P5Q-E yesterday.
But it did not work well. :(
I do not always reach the best with all HW. :D

DEWA DEWA
NewBeetle

yer thanks for that mate

congrats NewBeetle-san :up:
624mhz PL9 just amazing...

Great job NewBeetle-san! I see Tara-Chan is back into action. :p:

Very very very nice NewBeetle-san :toast:
Wish I had a good CPU like yours and your Pi skills and your setup's tidiness

Thank you so much, jamieuk23-san, andre X_X-san, BenchZowner-san. :toast:

Quote:

---

Originally Posted by Gautam

Great job NewBeetle-san! I see Tara-Chan is back into action. :p:

---

Thank you always, Gautam-san. :)
Tara-Chan is my Lethal Weapon for high FSB. :D
It can prevent the dewy than Fan ventilating. ;)

DEWA DEWA
NewBeetle

Very beautiful score again! Congrats NewBeetle-san! :toast:

As always amazing result NB-san!:clap:
Nice to see someone benchin other SPI than 1M and 32M.:up:

No doubt, a very nice overclocking and result again :).

Keep 8M ing, as Oliver said :D.

You never cease to amaze us Mr Beetle :) Astounding work as usual. Nice to see the NB isn't coldbugging. I had a serious issue with a GA X48 with only dice on the cpu which was causing the nb to cut out :(.

Nearly 6ghz :D A little more ;)

nice work congrats .

Very nice work!
Good to see that TP45 HP is also able to offer the possibilities to hit such impressive scores:)

Congratulation~! 8M WR :up:
Do you enter the Asus overclock competition?(July 28th and 29th, Hong Kong)
I expect to meet you. :)