Printable View
System in the sig. This is PC2100 Kingston Value RAM running sync at 210FSB.
I've run Prime95 for four hours on this comp before, but my sister shut down the computer while I was gone and this is all I've had time for.
I can do 215FSB, but I need to pump 2.77v into it.
Screenie!
Does that pic work for everyone?
nice:up:
you should consider doing a volt mod & seeing just how high it can go
So the link works for you?Quote:
nice
you should consider doing a volt mod & seeing just how high it can go
V-mod what? Stock vdd, and vdimm is only at 2.6.:smileysex I've just reached the point of diminishable returns.:mad:
2.77vdim is a lot?!
try 3.2V and see how fast it can fly
The 8RDA+ only goes to 2.9v. Like I said, going to 2.77 for 5mhz more FSB is garbage! I've wondered though if at 215 it is my board that needs more juice-not my RAM.
2.77 vdimm is nothing though, most ppl here run 2.8, 2.9 vdimm for daily use
I ran 2.9 and wanted more.
Quote:
Originally posted by Ragnarok
2.77 vdimm is nothing though, most ppl here run 2.8, 2.9 vdimm for daily use
no.. most people are 3.0+ daily use now ;)
What chips does it use?
nuts man!!
that is some nice ram...
pump some more voltage through it, 2.77v is NOTHING!!!
what timings, though?
Not sure on the chips. I'll look the next time I'm in the case.
Timings are the worst possible: 3-7-7-15. I can do better, but see no need to.:D
3-7-7-15
ROFL
that's looser than Ms Gang Bang 1945!....
LMAO!Quote:
Originally posted by Ragnarok
3-7-7-15
ROFL
that's looser than Ms Gang Bang 1945!....
Yeah, yeah, I know. Forgot to mention that I bought this RAM in Dec. of 02' for $80 at Frys.:D
speedstream5621 welcome to Xtreme Forums !!! Glad to see you here ! ;)
:toast: Thats a great OC on your memory !! Have you tried tighter timimings ?
Thanks. I'll probably be in here a bit more now, after about 3K posts at Sharky I need another outlet!Quote:
Originally posted by Major Slaughter
speedstream5621 welcome to Xtreme Forums !!! Glad to see you here ! ;)
:toast: Thats a great OC on your memory !! Have you tried tighter timimings ?
I haven't tried tighter timings on 2.6v. I know I've done 3-5-5-7, but I can't remember at what bus speed.:doh:
*edit-When does my status as a Recruit change?*
You should try 2-2-2-11 and see how far they go at 2.9v 8-)
With 3.2v and my old PC2100 I used to get 178mhz 2-2-2-6 with this 8K3A+... 8RDA+ to go in soon 8-)
running 3.3v for 2 weeks now :)
hell timings do make a lot if diffirence
i got 2*256 meg pc2700 (166fsb) and when i upped the voltage to 2.9 and the timings to 2.5 4 4 11 i got around 218fsb!
thats more then my kingston with bh6 chips!
insane how old ram can do such "high" clocks imo
your bh6 wouldnt even do 220fsb????
maccis bh6 does 270 cl2-2-2-5!!!
wth??
216max timings on 2.8v
maccis bh6 runs 270 with 2-2-2-5 and 3.6v afaik
wow
thats to insane
i am not in the mood of §§§§ing up antoher mobo and rams
cuz 3.6is imo very dangerous?
+ my mobo is an abit nf7s and i dont get more then 222fsb out of it
(and i cant find a good guide to do a mod to get more fsb outa this mobo)
koensa, try the L12 mod, it doesnt take long and its quite easy.Quote:
Originally posted by koensa
wow
thats to insane
i am not in the mood of §§§§ing up antoher mobo and rams
cuz 3.6is imo very dangerous?
+ my mobo is an abit nf7s and i dont get more then 222fsb out of it
(and i cant find a good guide to do a mod to get more fsb outa this mobo)
this makes me remember my kingston 333 which makes 420 at 1.5 2 2 5 1 with my old p4s533-e at 2.8