XS Case Gallery

Do to the server issues from some time back the last thread has some images that are just a little fubared. So Here we go with a new thread.
Simple rules to follow.
1. Post no more than 4 images of your case. You may link as many pics as you want, just no more then 4 using the image tag.
If you need more, just link please. Lets try to keep the thread decently enough 56k friendly.
2. Post your case.
If your using image tags so they are hosted off site and we get dead links/red X's etc, post will be deleted to keep thread clean.
3. No comments.
If you need to comment, start a new thread please with case name/user name.
4. Post only your case.
Lets keep thread clean!

Thanks, Now lets see some works of ART!~!

IFMU & XS Staff

The 70 lb Lan Beast

The mess inside.

9800 volt modded and Swifty on the nb

Black Ice Extreme on pipe hangers w/ 2x135 cfm fans

Well, its still not completely done. Still have to do some final touchups with wiring and such but here is my Aquatic~Core.

http://home.comcast.net/~pscdoc/wsb/html/Lian12.jpg

Top View

Side Window

Rear Side View

Front Side View

this is my rig..

a view of the very clean inside

http://www.over-clock.com/marci/promipix/prom2.jpg

http://www.over-clock.com/marci/promipix/prom5.jpg

http://www.over-clock.com/marci/promipix/prom6.jpg

and more recently it's changed from a Prommi Mk I to a Prommi Mk II... the only thing that changes in terms of looks is the bottom display, which now looks thusly:

http://www.over-clock.com/marci/promipix/display.jpg

Window design is getting redone.

Abit NF7-S Rev2.0
XP1700+ @ 2.8Ghz (pic above shows Barton 2500+ I'm testing at the mo)
512Mb EL-DDR OCZ Dual 3500
2x Seagate BarraV SATA 80Gb Drives
52x CD-RW
52x CD
ATI Radeon 9700 Pro
Promi Mk II
Coolermaster Musketeer
2x Chieftec Matrix Midi Tower Cases
MicroCool Northpole NB Heatsink

Watercooling is still under manufacture... 156w TEC to go on GPU and 80w TEC to go on NB... watercooled by ThermoChill Blocks and Rads (waiting for the blocks to become available) and am in middle of wiring all case fans to the Promi Controller to save on fanbus necessity (I hate the things... much prefer the Promi to do it automatically for me based on the 5 temp sensors I run on it)

Meteor Lights used in the top section behind the O-CuK.
Tricolor Cathode behind the main window...

http://www.angelfire.com/ultra/blimpo/Front-Side.JPG
http://www.angelfire.com/ultra/blimpo/Side-Night.JPG
http://www.angelfire.com/ultra/blimpo/Top-Grills.JPG
http://www.angelfire.com/ultra/blimpo/Front-Temps.JPG

P4 2.4C Maylay Week 22 @ 3.36Ghz - 1.6V (100% Stable) (Maze4 CPU Block @ 29C Idle - 36C Load)
Asus P4C800-E 280FSB (Z-Chipset for Intel)
Kingston PC3500 2x256mb 5:4 Ram divider - 224 Mem Freq. - 2-3-3-5 - 2.85V
Radeon 9800Pro 256mb - 435 Core, 385 Mem. (790Mhz), 1.6V (Maze4 GPU Block @ 30C - 35C)
Lian-Li PC75
Watercooling Other Hardware I have...
Black Ice Xtreme
Black Ice Xtreme 2
Custom PVC Reservoir (External)
Eheim 1250 Pump

That's my case. It isn't finish. Some parts are missing. Next week i hope my case will be finished.

www.noiseblocker.de

http://mitglied.lycos.de/twophases2/case1.jpg
http://mitglied.lycos.de/twophases2/case2.jpg
http://mitglied.lycos.de/twophases2/case3.jpg
http://mitglied.lycos.de/twophases2/case4.jpg

Few images of my last case mod.
1

2

3

4

here's mine :)

bit blurry so i'll apologise in advance.

http://www.fraggysworld.co.uk/images/Front/front10.jpg

:toast:

Frag

...

.

http://mitglied.lycos.de/twophases2/case.jpg

my case:)

Case
Info

http://www.illskill.net/newforum/fil...e-patching.jpg

Here's the WC rig I just finished. :D

Rear view of same case

And lastly...front view same case.

You won't find anything special in my rig, just a decent air-cooled setup that works for me:D

http://www.imagestation.com/picture/...2/fb2e557e.jpg

http://www.imagestation.com/picture/...f/fb2e638d.jpg

http://www.imagestation.com/picture/...d/fb2e97f4.jpg

http://www.imagestation.com/picture/...8/fb474993.jpg