Printable View
Does anyone know how to Vmod the gpu?
I'm a bit maxed out at 513Mhz sometimes it lockes up running 3dmark at 519 and sometimes it doesn't so I guess I need a Vmod. My memory is pretty good I think. I can run at 371.25Mhz mem without artifacts.
so I need a Vgpu mod urgent ;) If you guy's want I can post some pictures of the board this weekend.
Pics are up:
http://users.skynet.be/lodewj/DSCF0175.jpg
http://users.skynet.be/lodewj/DSCF0185.jpg
can someone help me out on this one?
I already tried this one from an other forum since it resembles a lot to my card but the mod failed. when I connected the Vmod with the resistor turned to 10K, My pc wouldn't post :(
http://www.ocbench.ro/radeon/vcoremod.gif
is there no one who can help me on vmodding my gpu?
i think ur going to the wrong pins on that ICS dood.
I think gymforte over at this thread has the same card modded with pics, perhaps u can check it out for reference.
9600pro vmod overclocking link
The picture I posted with the resistor is the one from gymforte.Quote:
Originally posted by Jethro
i think ur going to the wrong pins on that ICS dood.
I think gymforte over at this thread has the same card modded with pics, perhaps u can check it out for reference.
9600pro vmod overclocking link
But it results in a none posting pc here. total weirdness I guess.
that's why I'm asking for some help on this case.
no one who can help me? :(
Sorry I can not help you, but Im looking for some clues about tihs.
Can you check up your voltage.
My card can only clock to 460 so I think my card has very low voltage. But I need a reference from a card that overclocks more. If this card is at low voltage Im going to make a volt mod. If it is not Im going to make so and hope it to crack so I get a new one.
Or if you want to mail me the bios from your cad an dI can try it on my.
Then if I can go any higher we know that we have to get a bios from one of the card that overclock to 540.
Becuse then hte card overclock depends on the bios
See also if you have a card with all the caps on it and solder an fdd connector on it.
Seems that when some do the vgpu mod the mem oc will go down quit a bit.
One who has done the mod with that problem hooked up a fdd connector and running 600 core and 371 on mem
as you can see our hercules card uses a much smaler chip voor the vgpu so that picture can't help us :(Quote:
Originally posted by Yagami
image
This? [/B]
Hi again
I have tried to get it from Hercules but they do not answer on that question, they do not want to help people overclock.
Also tried to get a bios from a review card but they have all been returned back to Hercules.
So I would be very greatful if you send me a copy of your bios. If you want to I can send you the program to download the bios.
Quote:
Originally posted by -Markus-
Hi again
I have tried to get it from Hercules but they do not answer on that question, they do not want to help people overclock.
Also tried to get a bios from a review card but they have all been returned back to Hercules.
So I would be very greatful if you send me a copy of your bios. If you want to I can send you the program to download the bios.
ok, you can send me the program if you want. send me a pm with your email adress. I will send reply to you with my bios attached.
Thank you
I will send you the program.
Quote:
Originally posted by ns_ripper
ok, you can send me the program if you want. send me a pm with your email adress. I will send reply to you with my bios attached.