Done my upgrades, check em out - Plenty of pictures

I just completely killed my budget build and went all out with enthusiast stuff. I still have an Intel E8400 and will probably grab a 1600 FSB CPU after they are released. Upgrade info is in pictures:

I added my CPU and HSF pics, these werent part of the upgrade btw, but I thought I would add them in.

http://i118.photobucket.com/albums/o...v/DSC00068.jpg

http://i118.photobucket.com/albums/o...v/DSC00128.jpg

http://i118.photobucket.com/albums/o...v/DSC00132.jpg

http://i118.photobucket.com/albums/o...v/DSC00096.jpg

http://i118.photobucket.com/albums/o...v/DSC00052.jpg

http://i118.photobucket.com/albums/o...v/DSC00049.jpg

http://i118.photobucket.com/albums/o...v/DSC00035.jpg

http://i118.photobucket.com/albums/o...v/DSC00056.jpg

http://i118.photobucket.com/albums/o...v/DSC00057.jpg

http://i118.photobucket.com/albums/o...v/DSC00063.jpg

Nice stuff XD

Im currently working on overclocking the ram. It didnt work out of the box at either 1000 or 1150 Mhz, so I am starting at 800 Mhz and going up in 33 Mhz increments and burning it with two 32m Super PI runs each time. Currently up to 933 Mhz and increasing :)

My new 24/7 frequencies, I'm happy with these XD

http://i118.photobucket.com/albums/o...FlexII1150.png

Yay!

I'm trying to get it 32m Super PI stable at 500 FSB and 1200 Mhz ram. If I succeed, it will be posted here :)

good luck

looking good,

I like the whole red Themed cooler's look, not sure if it was intentional :)

Nice rig mate, hows that Asus cooler doing ? any update on temps plz

Nice build there! Although, it appears to have more loops in it than a theme park. :)

All the info you will need right here:

http://i118.photobucket.com/albums/o...exII1200-2.png

Temps go up to 64 degrees on Orthos Small FFT's, 58 Degrees on CPU + Ram blend test @ 4.25 Ghz and 1.35v. The ram is on just 2.15v and 1200 Mhz, but it errors in the stress tests sometimes around 7-9 minutes. 1185 Mhz is 100% stable, 1200 Mhz is stable so far with no problems other then in Super PI and Orthos sometimes.

Quote:

---

Originally Posted by autobot

Nice build there! Although, it appears to have more loops in it than a theme park. :)

---

Yea lol, 6 heatpipes on the HSF, 1 on the NB, 1 on the SB, 3 on the mofsets, 1 on each graphics card XD

They work great though. I picked the parts specifically for the copper pipes. I have my Antec Spotcool fan installed over my ram as well now.

your CPU heatsink might work better if you rotate it 90° clockwise. it has to do with the way heat travels through heat pipes.

Nice clocks with air and only at 1.25v's!!!

Quote:

---

Originally Posted by MasterChiefElmo

Nice clocks with air and only at 1.25v's!!!

---

it's his VID, not his vCore. CPU-Z does the same thing for me and i don't know why. it doesn't show my vCore.

Go into the ini or cfg file and change sensor = ON (it's prolly set on OFF)

I really like all the copper/heatpipes in there, it looks really cool! :D