Project: Queso - MM Ascension 3 WC Loops

I'm starting this build from the ground up, getting the case and WC components all in place before pulling the trigger on the hardware. Obviously, there are several things I cannot buy and put in the loops before deciding on HW, but you get the idea.

Hardware has been decided and most of it ordered, minus the 2 GTX 280's of course. :D
I have some other items to order, like 24" displays and what not, that will come once I get the gear baselined and have finished the continuously bleed of my walet from misc. parts for the case and WC loops.

Pic Index:
Case arrival, build
Pumps, Tubing, Fan Controller
Fans and sleaving
HW First Shipment, fans sleeved and mounted, rads mounted
Pumps mounted, Res's mounted, Res > Pump > Rad tubing
CPU Tubing runs, Res > Pump > Rad tubing take two
Chipset Blocks, Mobo Tubing, Leak Test
Thread Necromance

Hardware:

Mobo: Asus SIIE 790i Ultra
CPU: Intel Q9450
RAM: G.Skill DDR3 1600 (2x2GB)
GPU 1: eVGA GTX 280 (SLI)
GPU 2: eVGA GTX 280 (SLI){coming soon, I'm broke atm}
GPU 3: EVGA 9600 GT
PSU: Silverstone DA1200
HDD: 2x Seagate Barracuda 250GB 32MB Cache
DVD: Samsung 20X DVD±R
Case: MM Ascesion Anodized

CPU Loop

CPU Block: D-Tek Fuzion V2 (Second machine gets the V1 I already had)
Pump: Laing D5 Vario / MCP655
Res: EK 150
Rad: PA120.3 w/ EK ½" Barbs
Fittings: DD/Bitspower Fat Boy 11mm OD

GPU Loop

GPU Block 1: TBD
GPU Block 2: TBD
GPU Block 3: 9600 GT - EK9600 FC
Pump: Laing D5 Vario / MCP655
Res: EK 150
Rad: PA120.3 w/ EK ½" Barbs
Fittings: DD/Bitspower Fat Boy 11mm OD

Chipset/Mosfet Loop
NB Blocks: EK NS S-MAX
SB Blocks: EK NB/SB ASUS 1 - Evercool Low Profile Copper (depends on fit)
Mosfet Blocks: EK Mosfet ASUS 3a
Pump: Laing D5 Vario / MCP655
Res: EK 150
Rad: PA120.3 w/ EK ½" Barbs
Fittings: DD/Bitspower Fat Boy 11mm OD

http://photos.skinnee-industries.com...01_Unboxed.jpg
Yes, that is 3 PA120.3 hanging out in the background...more to come with those in the next week.
http://photos.skinnee-industries.com...0/02_Front.jpg
I had to put the sides on to see how she looked all covered up.
http://photos.skinnee-industries.com...80/03_Back.jpg
Look at that dumper. :D
http://photos.skinnee-industries.com.../04_L-Side.jpg
I want as much of the case and other structure components black, so had to do a little sanding a painting with the slot covers.
http://photos.skinnee-industries.com...lot-Covers.jpg
Way to shiny and definitely not black...cue the dremel and flat black rattle can.
http://photos.skinnee-industries.com..._SC-QkTest.jpghttp://photos.skinnee-industries.com...QT_Painted.jpg
Yup, thats as good as its going to get...on to the others.
http://photos.skinnee-industries.com...C-Finished.jpg
There...thats much better.
http://photos.skinnee-industries.com...Ready-4_WC.jpg
There, case is ready for the stuffing! :yepp: Another order arrives Thursday, I'll update again on the weekend.

One final pic...my trusty sidekick prepared for flying debris.
http://photos.skinnee-industries.com...Supervisor.jpg

sidekick says you're behind schedule. can't wait!

BTW, for those of you waiting on an Ascension, get ready to add some length onto the power/reset button and led's...there is no way those are going to reach.

Looking forward to this.

Cute dog by the way. Safety first and all that.

Subbed, And yes, already bought new Vandal resistant switches, with 30
" of cable..

Love that side kick!

Those cases are PIMPY . . .
http://img488.imageshack.us/img488/3...donjaunds3.jpg

Quote:

---

Originally Posted by disruptfam

Love that side kick!

---

+1 on the side kick!

I was just thinking about getting the Ascension so Im going to follow your bulid and see how it turns out. Looking sweet so far!

subscribed...

lol...love the sidekick!!

sidekick looks concerned

Sidekick is awesome......



oOooOoOOOoooOoOoOo and so is the pc.. MORE UPDATES PLZ!!!!!

Got some more parts and pieces in just before the weekend and have another order on its way...should have more pics for you all tomorrow.

Aaaa, cant wait!!

looking forward to more pics :D. subed

someone make the pic for ur dog say " i r serious "

lol

but yea, can't wait to see pics!!

more pics required...

good luck on assembling...

following this!

Any updates?

So you figure you got about a 1G into it
before you even spend a dime on components,
just what we're looking at? close?

Yeah, just what is pictured up there was $1085 USD. I have more pics to add, but nothing has gone into the case yet other than me test fitting things.

Fans, sleeving, and molex connectors will be here Tuesday (06/02), Rheobus Extreme arrived yesterday along with some Ceramique and MX-2. 3 MCP655's, EK150's, tubing (Tygon B-44-4X), Bitspower Fat Boys, PTS Gel blocks, fan mounts, Biocide and Feser Blue UV Dye arrived last week.

Finally ordered some HW this evening...so a good portion of the remaining WC gear can be order, now I just need another paycheck and June 17th (hint, hint :D) to get here. There are a few odds and ends I need to order yet, but for the life of me I cannot find a US retailer that stocks Feser Orange UV Dye, thats what I want to GPU loop to be. I'm also seriously contemplating building a custom pump tray.

I'll try and get the pics off the camera yet this evening, but there has not been much action other than taking the goodies out of the brown cardboard boxes.

Ok, as I said, not much of an update...but here are two pics of the goodies I recieved last week. I have 2 smaller orders and 1 big HW order arriving the middle of this week...stay tuned.

ahh yes, the eye candy. :D

http://photos.skinnee-industries.com.../10_Parts2.jpg
3 MCP655's, D-Tek Fuzion V2 and Quad Midplate. PT_Nuke, Bitspower FatBoys, PSU Modkit, 120MM Fan Vibration Dampeners, 3 PTS Gel Pads EK150(final one), 3 EK Ant-Cyclon's and 25 feet of Tygon B-44-4X from McMaster-Carr. Oh yeah, and one Blue PTS Pen.

http://photos.skinnee-industries.com.../11_Parts3.jpg
Tube of MX-2 (I'm nearly out of AS5), 22g of Cermaique for Chipset and Mosfet blocks, and Sunbeam Rheobus (Black).

As I said...much more to come this week! :up:

nice collection there :D wouldn't a black rheobus fit more to your case though? or are you planning to paint it yourself?