Dimas Bench Tables REV2

hello guys, after some months working on new revision, i got last rev2 ready, i try to fix all the bugs possible from the V1 and V1.4.
this was the last thread http://www.xtremesystems.org/forums/...d.php?t=130865
where i show the V1 and V1.4 developing.
some pics of the table, with air cooling, waiting for watercooling kit.

BENCH TABLE EASY V2 ON AIR

http://www.pctunerup.com/up/results/...6_IMG_8641.jpg

http://www.pctunerup.com/up/results/...4_IMG_8642.jpg

http://www.pctunerup.com/up/results/...4_IMG_8643.jpg

http://www.pctunerup.com/up/results/...8_IMG_8644.jpg

http://www.pctunerup.com/up/results/...1_IMG_8645.jpg

BENCH TABLE EASY V2 ON WATERCOOLING (thanks Ybris-Cooling)

http://www.pctunerup.com/up/results/...0_IMG_8698.jpg

http://www.pctunerup.com/up/results/...5_IMG_8699.jpg

http://www.pctunerup.com/up/results/...0_IMG_8700.jpg

http://www.pctunerup.com/up/results/...9_IMG_8702.jpg

http://www.pctunerup.com/up/results/...4_IMG_8703.jpg

down there, the full mounting guide for air cooling and liquid cooling

some pictures of the new Bench Table Hard V2 ( painted and INOX version)
INOX 304 " limited edition"
http://www.pctunerup.com/up/results/...5_IMG_9021.jpg
http://www.pctunerup.com/up/results/...2_IMG_9024.jpg
http://www.pctunerup.com/up/results/...9_IMG_9026.jpg
http://www.pctunerup.com/up/results/...7_IMG_9027.jpg
http://www.pctunerup.com/up/results/...3_IMG_9028.jpg

painted version

BENCH TABLE EASY V2 MOUNTING GUIDE (AIR)

Appena scartata il pacco,dopo aver rimosso gli imballi, ci ritroveremo davanti al banchetto da assemblare, i componenti avvitabili/viteria inclusi nel bundle dei fissaggi sono:
nr 50 viti M4x10
nr 50 dadini M4
nr 50 ca rondelle foro 5
nr 10 distanziali 25mm Femmina-Femmina M3
nr 35 viti M3x6
nr 20 rondelle foro 3
nr 4 piedini base plastica
nr 4 dadi M8( fissaggio piedini)
nr 8 rondelle foro 8 (fissaggio piedini)
nr 12 viti M4x45 (fissaggio ventole ai supporti)
nr 2 cavetti power e reset con guaina colori rosso e nero

per chi avesse preso l'accessoristica, la quantita' di viteria e' adattata in base ai vari suppori, mentre per chi avesse compreso nell'acquisto l'accessorio "Zigrinate Full" ossia un set completo di viti zigrinate e' formato da
-23 viti zigrinate M3
-21 viti zigrinate 6-32

e tutti i supporti compresi nel bundle "Banchetto Easy V2" piu gli accessori richiesti in fase di acquisto.

appena scartato vedremo i componenti da assemblare
http://www.pctunerup.com/up/results/...6_IMG_8582.jpg

http://www.pctunerup.com/up/results/...5_IMG_8583.jpg

http://www.pctunerup.com/up/results/...4_IMG_8584.jpg

http://www.pctunerup.com/up/results/...8_IMG_8585.jpg

procediamo al montaggio delle periferiche ottiche (slot 5,25") e gli hard disks (3,5")

http://www.pctunerup.com/up/results/...0_IMG_8586.jpg

http://www.pctunerup.com/up/results/...9_IMG_8587.jpg

posizioniamo le periferiche sulla base e scegliamo la nostra disposizione
http://www.pctunerup.com/up/results/...8_IMG_8588.jpg

http://www.pctunerup.com/up/results/...7_IMG_8589.jpg

http://www.pctunerup.com/up/results/...3_IMG_8590.jpg

fissiamo con le viti M4x10 + rondelle foro 5 + dadino M4 i supporti alla base
http://www.pctunerup.com/up/results/...4_IMG_8597.jpg

http://www.pctunerup.com/up/results/...0_IMG_8598.jpg

http://www.pctunerup.com/up/results/...8_IMG_8599.jpg
questo sara' il risultato finale del montaggio dei 3 supporti principali,
supporto 3,5", il supporto 5,25" e il supporto alimentatore.
http://www.pctunerup.com/up/results/...1_IMG_8600.jpg

http://www.pctunerup.com/up/results/...6_IMG_8601.jpg

ora che la base e' montata possiam dedicarci alla seconda parte, prendiamo i piedini plastici, le 8 rondelle foto 8 e i dadi M8, fissiamo i piedini agli appositi fori posti sotto al banchetto.
http://www.pctunerup.com/up/results/...7_IMG_8592.jpg

http://www.pctunerup.com/up/results/...2_IMG_8594.jpg

dopo aver fissato i piedini,ribaltiamo in posizione verticale il banchetto e prepariamoci a montare i distanziali, quindi teniamo a portata di mano, i 10 distanziali 25mm femmina-femmina, 10 vitine M3x6 e 10 rondelle foro 3.
http://www.pctunerup.com/up/results/...7_IMG_8595.jpg

http://www.pctunerup.com/up/results/...6_IMG_8596.jpg


http://www.pctunerup.com/up/results/...3_IMG_8602.jpg
il risulatato finale sara' questo, ossia tutti i distanziali montati perpendicolari alla base di montaggio della scheda madre.
http://www.pctunerup.com/up/results/...9_IMG_8603.jpg

visualizziamo i 2 fori per il montaggio dei 2 tastini, power on e reset
http://www.pctunerup.com/up/results/...8_IMG_8604.jpg
infiliamo i 2 tastini nei rispettivi fori e fissiamoli con la ghiera, e' sufficente tirarli a mano, per i piu' scettici con una pinza si stringono di piu', ma non e' necessario.
http://www.pctunerup.com/up/results/...2_IMG_8605.jpg

http://www.pctunerup.com/up/results/...6_IMG_8606.jpg

recuperiamo il piano con i supporti montati e facciamolo scivolare all'interno del banchetto, dalla parte posteriore, quella con uno spacco per il passaggio dell'alimentatore e senza tastini.
http://www.pctunerup.com/up/results/...9_IMG_8611.jpg

http://www.pctunerup.com/up/results/...8_IMG_8612.jpg
fissiamo le prime viti M4x10+ rondella + dadino M4, incliniamo il banchetto per aiutarci nel montaggio delle viti centrali
http://www.pctunerup.com/up/results/...2_IMG_8613.jpg

http://www.pctunerup.com/up/results/...7_IMG_8614.jpg
riportiamo il banco in orizzontale e prepariamo la scheda madre da montare, preferibilmente col dissipatore gia' montato.
http://www.pctunerup.com/up/results/...2_IMG_8615.jpg

http://www.pctunerup.com/up/results/...9_IMG_8616.jpg

http://www.pctunerup.com/up/results/...4_IMG_8617.jpg

http://www.pctunerup.com/up/results/...2_IMG_8618.jpg

http://www.pctunerup.com/up/results/...0_IMG_8619.jpg
fissiamo la scheda madre ai distanziali, tramite le vitine M3x6 oppure le vitine zigrinate M3
http://www.pctunerup.com/up/results/...7_IMG_8620.jpg

recuperiamo il supporto schede aggiuntive e rimuoviamo le viti zigrinate per gli slot che andremo a usare.

http://www.pctunerup.com/up/results/...6_IMG_8621.jpg

fissiamo la scheda video con una sola vite zigrinata, e successivamente andiamo a fissare le 2 viti M4x10 + rondella + dadino M4, alla base del supporto schede espansione, in questo modo avremo la scheda video perfettamente perpendicolare,senza pericolose inclinazioni date da errati montaggi del supporto schede espansione.

http://www.pctunerup.com/up/results/...2_IMG_8622.jpg

fissiamo tutte le altri viti zigrinate o schede pci/pciexpress/agp.

http://www.pctunerup.com/up/results/...0_IMG_8623.jpg

http://www.pctunerup.com/up/results/...8_IMG_8624.jpg

http://www.pctunerup.com/up/results/...4_IMG_8625.jpg
procediamo al montaggio di tutti i cavi provenienti dall'alimentatore, Ide, Sata e connettori power on e reset.
http://www.pctunerup.com/up/results/...2_IMG_8626.jpg

http://www.pctunerup.com/up/results/...6_IMG_8627.jpg

http://www.pctunerup.com/up/results/...6_IMG_8628.jpg

http://www.pctunerup.com/up/results/...3_IMG_8629.jpg

http://www.pctunerup.com/up/results/...8_IMG_8630.jpg

recuperiamo il supporto ventilazione scheda video per ventole da 120x120mm.

http://www.pctunerup.com/up/results/...2_IMG_8632.jpg

montiamo la ventola con delle viti incluse nel bundle o gli appositi piedini anti vibrazione forniti con la ventola.

http://www.pctunerup.com/up/results/...6_IMG_8633.jpg

Montiamo il supporto per ventola scheda video, sul lato sinistro del Banchetto Easy V2, e fissimo il supporto con 2 viti M4x10+ rondella foro 5 + dadini M4.
http://www.pctunerup.com/up/results/...5_IMG_8635.jpg

http://www.pctunerup.com/up/results/...0_IMG_8636.jpg

http://www.pctunerup.com/up/results/...1_IMG_8637.jpg

http://www.pctunerup.com/up/results/...6_IMG_8638.jpg
recuperiamo il supporto ventola 120x120mm, e montiamo la ventola 120x120mm, con la stessa procedura del supporto precedente.
http://www.pctunerup.com/up/results/...9_IMG_8640.jpg

montiamo il supporto nelle vicinanze del dissipatore ad aria, per favorirne il ricircolo di aria.
http://www.pctunerup.com/up/results/...6_IMG_8641.jpg

http://www.pctunerup.com/up/results/...4_IMG_8642.jpg

http://www.pctunerup.com/up/results/...4_IMG_8643.jpg


il Banchetto Easy V2 e' completo e pronto all'uso, per chi avesse memorie molto calorose, si puo' montare il supporto ventola 92x92 per ram, in modo da favorire il ricircolo nella zona ram,l'altro supporto non utilizzato nella guida e' il supporto ventola 80x80.
http://www.pctunerup.com/up/results/...8_IMG_8644.jpg

http://www.pctunerup.com/up/results/...1_IMG_8645.jpg

Questa guida non vuole dettare delle regole al montaggio, ognuno e' libero di interpretare il montaggio a suo piacimento, e di disporre i supporti come meglio pensa vadano disposti.
questo banchetto offre anche la possibilita' di integrare un sistema a liquido a singolo o doppio radiatore, ma e' un altra guida, e ne riparleremo alla prossima puntata;)


BENCH TABLE EASY V2 MOUNTING GUIDE (LIQUID COOLING)

http://www.pctunerup.com/up/results/...4_IMG_8658.jpg

http://www.pctunerup.com/up/results/...0_IMG_8659.jpg

http://www.pctunerup.com/up/results/...5_IMG_8662.jpg

http://www.pctunerup.com/up/results/...7_IMG_8663.jpg

http://www.pctunerup.com/up/results/...3_IMG_8664.jpg

http://www.pctunerup.com/up/results/...9_IMG_8665.jpg

http://www.pctunerup.com/up/results/...7_IMG_8668.jpg

http://www.pctunerup.com/up/results/...1_IMG_8669.jpg

http://www.pctunerup.com/up/results/...1_IMG_8671.jpg

http://www.pctunerup.com/up/results/...3_IMG_8672.jpg

http://www.pctunerup.com/up/results/...8_IMG_8673.jpg

http://www.pctunerup.com/up/results/...4_IMG_8674.jpg

http://www.pctunerup.com/up/results/...8_IMG_8675.jpg

http://www.pctunerup.com/up/results/...2_IMG_8676.jpg

http://www.pctunerup.com/up/results/...0_IMG_8677.jpg

http://www.pctunerup.com/up/results/...4_IMG_8680.jpg

http://www.pctunerup.com/up/results/...8_IMG_8681.jpg

http://www.pctunerup.com/up/results/...3_IMG_8682.jpg

http://www.pctunerup.com/up/results/...8_IMG_8683.jpg

http://www.pctunerup.com/up/results/...2_IMG_8684.jpg

http://www.pctunerup.com/up/results/...6_IMG_8685.jpg

http://www.pctunerup.com/up/results/...5_IMG_8687.jpg

http://www.pctunerup.com/up/results/...0_IMG_8689.jpg

http://www.pctunerup.com/up/results/...5_IMG_8690.jpg

http://www.pctunerup.com/up/results/...9_IMG_8691.jpg

http://www.pctunerup.com/up/results/...3_IMG_8692.jpg

http://www.pctunerup.com/up/results/...1_IMG_8693.jpg

http://www.pctunerup.com/up/results/...8_IMG_8695.jpg


http://www.pctunerup.com/up/results/...0_IMG_8696.jpg

http://www.pctunerup.com/up/results/...4_IMG_8697.jpg

http://www.pctunerup.com/up/results/...0_IMG_8698.jpg

http://www.pctunerup.com/up/results/...5_IMG_8699.jpg

http://www.pctunerup.com/up/results/...0_IMG_8700.jpg

http://www.pctunerup.com/up/results/...9_IMG_8702.jpg

http://www.pctunerup.com/up/results/...4_IMG_8703.jpg

Can't wait for pics mate. :)

I'm looking forward also :D

updated pics

I love it. If you weren't so far away and if I had more space on my desk, I would love to have one. :up:

What fans are those? The black ones with the green blades.

Just aperfect. Great work :clap:

Can we get these in the US ?

Sorry if dumb question but I thought I saw back up in this thread that you are working on that.

Quote:

---

Originally Posted by Polizei

I love it. If you weren't so far away and if I had more space on my desk, I would love to have one. :up:

What fans are those? The black ones with the green blades.

---

nexus,i'm switching to full nanoxia...

Quote:

---

Originally Posted by Buckeye

Can we get these in the US ?

Sorry if dumb question but I thought I saw back up in this thread that you are working on that.

---

hello, still working, by the way,who's interested can send a pm, so i can start make a list,and get quantity needed for US;)

Hey Dimas!
I love it! :worship:
When can we see some pictures with watercooling-kit mounted?
Would be nice to see how it looks with triple rad, cpu, graphic card and mainboard watercooled, pump'n'res.... like the full package...

:up:

Quote:

---

Originally Posted by Fr3akyPete

Hey Dimas!
I love it! :worship:
When can we see some pictures with watercooling-kit mounted?
Would be nice to see how it looks with triple rad, cpu, graphic card and mainboard watercooled, pump'n'res.... like the full package...

:up:

---

hello, one of my customer make a fantastic work on that table, take a look of his integration, my integration on white one will arrive;)
http://www.pctunerup.com/up/image.ph...13182931_1.jpg
http://www.pctunerup.com/up/image.ph...13183320_2.jpg
http://www.pctunerup.com/up/image.ph...13183535_3.jpg
http://www.pctunerup.com/up/image.ph...13183813_5.jpg
http://www.pctunerup.com/up/image.ph...13185539_8.jpg

Nice Pictures, Dimas!
Your friend has got a nice setup there.

Quote:

---

Originally Posted by Dimas

hello, still working, by the way,who's interested can send a pm, so i can start make a list,and get quantity needed for US;)

---

PM sent Dimas :)

These look like they will work well for LN2 benching ?

Quote:

---

Originally Posted by Dimas

hello, one of my customer make a fantastic work on that table, take a look of his integration, my integration on white one will arrive;)
http://www.pctunerup.com/up/image.ph...13182931_1.jpg
http://www.pctunerup.com/up/image.ph...13183320_2.jpg
http://www.pctunerup.com/up/image.ph...13183535_3.jpg
http://www.pctunerup.com/up/image.ph...13183813_5.jpg
http://www.pctunerup.com/up/image.ph...13185539_8.jpg

---

In the first picture, what are the units installed right above the DVD drive with the LCD display on each one ?

Quote:

---

Originally Posted by Buckeye

In the first picture, what are the units installed right above the DVD drive with the LCD display on each one ?

---

i think that are something like a fan bus, to regolate fan speeds;)

Just placed my order for 2 of these and i cant wait.

Super price and super quality :)

holy hell, that looks good
(it would look even better watercooled, though :cool:)

Man... that is epic. I want one NOW! To all the aussie guys on here: Lets start a group buy ;)

Quote:

---

Originally Posted by Dimas

hello, still working, by the way,who's interested can send a pm, so i can start make a list,and get quantity needed for US;)

---

wow, what a great bench!

Looks great!

thanks guys,i've still to traslate the mounting guide in english, hope to have watercooling part before end of week;)

Any news on your watercooled bench table v2?

GREAT WORK M8 :D

Will you find resselers or just sell your self ?

Quote:

---

Originally Posted by Fr3akyPete

Any news on your watercooled bench table v2?

---

got the parts, but still have to find time,couse packing take lot of time, hope before end of week;)