Post your 45nm Quad OC with full BIOS settings + volts + temps

I have my x3350 up and running. I am to 3.6ghz(450x8) so far, and want to see how my settings, volts, and temps compare to others.

This thread:
-Post full hardware full hardware specs(sig or otherwise)
-Post OCs that you have yet to see fail, and have primed for at least a few hours
-Post Bios Settings
-Post Temps
http://x025.uploaderx.net/x/450x8_3.6ghz_stable.jpg
If image fails, try going here: http://x025.uploaderx.net/x/450x8_3.6ghz_stable.jpg
(For some the embedded image it was not working for me at first, but is now? idk...)

CPU Feature->
Thermal Management Control: Disabled
PPM(EIST) Mode: Disabled
Limit CPUID MaxVal: Disabled
C1E Function: Disabled
Execute Disable Bit: Enabled
Virtualization Technology: Enabled
Core Multi-Processing: Enabled

DRAM Timing-> 5,5,5,12

Voltage Setting->
CPU VID Control: 1.25
CPU VID Spedial Add: Auto
DRAM Voltage Control: 2.12
SB Core/CPU PLL Volage: 1.51
NB Core Voltage: 1.617
CPU VTT Voltage: 1.598
Vcore Droop Control: Disabled
Clockgen Voltage Control: 3.45
GTL + Buffers Strength: Strong
Host Slew Rate: Weak
GTL Ref Voltage Control: Enabled
CPU GTL 1/2 Ref Volt: 115
CPU GTL 0/3 Ref Volt: 115
North Bridge GTL Ref Volt: 115

Genie BIOS Settings->
Clock VCO divider: Auto
CPU Clock Ratio: 8x
CPU N/2 Ratio: Disabled
CPU Clock: 450mhz
Boot Up Clock: Auto
DRAM Speed: 400/800
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled

maybe indicating FPO/Batch# & Packed date would also be helpful :)

FPO/Batch# may not help. :) But anyway:

X3350 @ 3.80GHz (475 x 8)

CPU features:

C1E on/off (doesn't matter)
SpeedStep on/off (doesn't matter)
All other settings on except for CPUID Max Limit.

BIOS settings:

Clock Over-charging Mode: 0.80v

CPU volt: 1.3625 (1.320-1.336v real, 1.280 - 1.304v under max load. Vdroop modding effects wearing off so... I guess this is to be expected. :) I'll try modding again soon, though)
CPU volt ref: 0.63x
PLL volt: 1.58v
FSB Term volt: 1.32v
NB volt: 1.55v
NB volt ref: Auto
SB volt: Auto

RAM:

Kingston HyperX 950MHz dual-channel 4-4-4-12
DRAM volt: 2.36v

Motherboard: ASUS P5E-VM HDMI
CPU cooler: Thermaltake Big Typhoon (no VX)
Case: Antec 900

Temps as reported by Real Temp:
Idle: 19/17/17/17
Load: 46/44/42/42 (using Prime95 small FFTs)

Temps as reported by CoreTemp:
Idle: 32/31/29/29
Load: 60/58/55/55

CPU VID: 1.1250v

Voltage requirement for different clocks (stable):

333 x 8: 1.105v
400 x 8: 1.120v
450 x 8: 1.225v
475 x 8: 1.304v
490 x 8: 1.358v
500 x 8: 1.422v (can only validate and/or run a quick SuperPI 1M)
505 x 8: ???? (POSTable at 1.368v)
510 x 8: ???? (POSTable at 1.398v)
520 x 8: ???? (POSTable at 1.412v)
525 x 8: ???? (POSTable at 1.444v)

Edit: 530 x 8: board hangs before it completes the boot. :p My guess: this thing can go much much higher... probably up to 540.

Yea, let's see some batch #'s. My x3350 arrived today.
Batch #: L803A756
Pack Date: 03/06/08

When my mobo gets here, I'll post results.

FPO/Batch #: L803B196
Pack Date: 03/13/08

Mine was fairly recently packed. I got the chip on the 20th, so I'd say... exactly a week after I got the chip. :) Lovin' her so far! Quad @ 490MHz stable? Count me in! :up: