will the Ek Rev 2 Reservoir Base fit with the Alphacool Cape Coolplex Pro 25 External? :confused:
Printable View
will the Ek Rev 2 Reservoir Base fit with the Alphacool Cape Coolplex Pro 25 External? :confused:
Ek Rev 2 Reservoir Base
http://www.chilledpc.co.uk/shop/images/large/ekrev2.jpg
Alphacool Cape Coolplex Pro 25 ExternalQuote:
Technical data:
295ml capacity
Installation height: 250mm
Diameter: 50mm
Two reservoir holder enclosed.
Weight: 250g
http://www.performance-pcs.com/catal...s/15134_01.jpgQuote:
Technical data:
250ml capacity
Installation height: 250mm
Diameter: 50mm
Connection: 2xG1/4", and 1xG1/4" for the lighting module
anyone?
Agreed on the thread pitch, so no workie.
too bad, i'm planning to put a fill port on the coolplex is there any other way?Quote:
Originally Posted by Conumdrum
yes. you could get the trusty drill and drill a hole where you want the fill port, then get a bspp 1/4 (the standard g1/4) tap, and tap a thread there. Lastly, you get your faviourite g1/4 barb and screw it on! tadda! easy fill port on res
Don't be so quick to write this idea off. I just tested my Magicool (Alphacool knock off, if I'm not mistaken) with my EK and it does indeed fit. :up:
Quote:
Originally Posted by bugkalot
Yip, they fit perfect :up:
are you sure? cause i'm going to order it overseas :(Quote:
Originally Posted by coolmiester
The picture below shows a Cape Coolplex 25cm Black Reservoir with an EK-Multioption RES Bottom rev.2 fitted and the original Coolplex top beside.Quote:
Originally Posted by bugkalot
http://www.coolercases.co.uk/images/...k_coolplex.jpg
that you very much! :)Quote:
Originally Posted by coolmiester