Does anyone know anything about this memory yet? Highest-binned 4GB DDR2 kit out there AFAIK. $170 @ the Egg right now.
Printable View
Does anyone know anything about this memory yet? Highest-binned 4GB DDR2 kit out there AFAIK. $170 @ the Egg right now.
8 layer PCB too :)
It's still too expensive...the 8000CL5D-4GB kit overclocks easy to 1066MHz...and only costs $114 shipped.
My kit of that, and of TeamGroup 1066 2x2, are both en route.
Mind telling us where you got the Team 4GB 1066 kit? I can't find it anywhere. I think I'd prefer Team over G.Skill.
i have read on a lot of places the team kit does not usually even do 1066.. so id imo wait to see more results
Maybe with a particular board but as a general statement I would say that's BS. If the memory is being sold as 1066 then it will run at that speed.Quote:
Originally Posted by zfactor
maybe they are having issues then i dont know.. just a lot of people said that they had problems getting it to run at 1066..
http://www.newegg.com/Product/Produc...82E16820313043
Out of stock now, unfortunately.
2.2-2.3V?????...way too high, G.SKILL can accomplish the same clock speed with 2.0V
yeah but they are also out of stock now in the g skill in 1066's..
Sorry...but this kit can't compete against this!
http://www.newegg.com/Product/Produc...82E16820231145
$110 with free shipping.
The 1000 mhz one is only 6 layers PCB. The 1066 Mhz is 8 layers, hence why it costs more, and it should also overclock more.
But why arent there any reviews on it yet? Cant G skill give out a single review sample?
I'll test it for them :p
Just ordered 2 kits for 8G total from the egg since I just saw they were back in stock today :clap:
I beat you to it! This maximus overvolts the memory, but at 2.1 Volts real and 2.0V bios, I have 8 gigs running at their rated speed. This isn't an overclock, but 8 gigs running that fast is pretty good for the voltage. I finally got this new setup stable in the we hours of this morning, but I may try some tests later. I do know that they will NOT post with 4-4-4-12 at the same speed and voltage.Quote:
Originally Posted by SWFLTrader
6 layers & 8 layers, u wont really see a difference in overclock ( excepting in very high overclock ...)Quote:
Originally Posted by bhavv
http://img518.imageshack.us/img518/8...tstabledc7.jpg
-Testing more tonight
i see 548 so it doesnt seem like they oc much more than the 1000's do.. i missed both these and the team's today this sucks
Are you on the right forum?Quote:
Originally Posted by zEpLm
High overclock is exactly what we look for here. I'll take the 8 layer ram anyday over 6 layers. Except my current ram is fine untill this one falls below £100 (currently £117). Once its below £100 I upgrade and sell :)
Actually I had the impression that these would be good to reach 1200 mhz. If not I wait even longer for the next 2x2 Gb set.
http://img166.imageshack.us/img166/6...erf8560gt6.jpg
Edit: See Below :)
2x2GB 1066PK Auto SPD
5-5-5-15
tRRD:3
tRFC:52
tWR:6
tRTP:3
tRD:8
-3-5-4-6-4-6
2x1GB 1066HK Auto SPD(my 2GB Kit on RMA)
Micron D9GCT
5-5-5-15
tRRD:11
tRFC:46
tWR:10
tRTP:5
tRD:8
-5-5-4-6-4-6
Edit: Orthos Testing at 2.10v Bios ~ 2.224v HMonitor Currently Testing Stable 8:30 blend and counting...
I was expecting this ram would overclock up to 1200 with 8 layer pcb i guess the price isnt worth it getting this model. I was having dilemma between this and crucia ballistix tracer 8500 2gb kit. im go with crucial now:D
2.2v
http://img120.imageshack.us/img120/6...able560qc9.jpg
-2.10v Bios ~ 2.224v Hardware Monitor
-Auto SPD Timings
-Still Stable as I type so its time to increase FSB. :)
UPDATE:Code:DRAM Static Read Control:DISABLED
Ai Clock Twister : STRONG
Transaction Booster : DISABLED
BOOST: 0
Performance Level: 7 ?
DRAM Voltage : 2.10~2.224v Hardware Monitor
DDR2 Channel A REF Voltage : DDR2
DDR2 Channel B REF Voltage : DDR2
DDR2 Controller REF Voltage : DDR2
-Used Auto SPD Timings for all Tests so there is a lot of headroom.
-Tried to push 565 mhz and Orthos Failed under 1 min. Vdimm made no difference pushed to 2.14 Bios Setting.
-Got bored its time to game!
what is the chip configuration on these 64x 8 per stick??
Geil Evo One CL4 can do better than G.Skill 1066 but cost little more.
8-layer pcb also.
http://www.xtremesystems.org/forums/...d.php?t=177363
If you are to buy 2x2GB sticks think if 520+ or 540+ is your goal for 24/7
so as to buy accordingly.
After all these are PK Performance series modules, please don't take my juvenile testing as proof. I discovered more hindrance my board has over 455 FSB, and I never changed the Timings from default. I was just pushing Max Clock on Stock SPD against Bios 0907 with different performance levels. Great sticks, just need legitimate reviews on boards without bugs. :ROTF: