http://www.corsair.com/news/press_re...aspx?id=447949
Found this today, a little late to the party, but better late then never.
Printable View
http://www.corsair.com/news/press_re...aspx?id=447949
Found this today, a little late to the party, but better late then never.
1142Mhz????....oh yeah baby!
BUT....at what voltage?????........2.3V.......scary!!!!!!!!
4Gb (2x2GB) PC2 - 9136 kit for me please!!
My current OCZ 2x2GB ReaperX PC8000 kit cant even do stated 1000MHZ @ 2.2V (max warrented) let alone the rated 2.1V!!
Having to underclock to 900-5-5-5-18 @2.1V to get em stable!
Was only £76 from OCUK mind! but still expected more
Come on Corsair get em out allready!
At what CL the new DDR3-2000MHz kits?
well they didn't give any info about that it seems, however their 1600 kit has CL 7 with 1.9V and their 1800 kit has CL 7 with 2V. So there is a chance for the 2000 kit to be CL 7 if they are willing to give 2V+ ...Quote:
Originally Posted by Face
Then it will be at 2.2v ;)Quote:
Originally Posted by Den Leiw
when asus get a bios that relaxes tRFC below 42 you will do better. What does auto set on the ram you have now?Quote:
Originally Posted by Psycho_eddie
Ah explains things abit!, its left on auto picks up as 46 tRFC but highest manual option gives only 42!Quote:
Originally Posted by Tony
What can i do? as currently running very slow 900Mhz here allmost lost faith in OCZ completely here :shrug:
There are 3 options:
1)Change motherboard with manual tRFC up to 70 (Abit for example)
2)Wait for a bios update
3)Modify with spdtool the tRFC value
But are those microns, if not, why bother?
Imo, just get some crucial...
Corsair pretty much lost its crown by using cheap ics on their ram,
and offer lousy oc results...
Not to mention corsairs are expensive like hell...
we have an spd that sets 54 by auto, come join the support forum and we we get you setup.Quote:
Originally Posted by Psycho_eddie
ocztechnologyforum.com
Cant find anywhere to download SPD-Z from, seems my defult SPD is 46 on this setting would be needing flash to 54 cant find anything on your forum for this
Post this at the OCZ support forum.Quote:
Originally Posted by Psycho_eddie
Quote:
Originally Posted by Tony