Test Systems
Q6600 Go Rev. 4 Core Enable, 4260 MHZ Air.
Dfi X38 T2R/G
1000 Watt silverstone psu.
2x 512 mb ddr2 dual 800mhz ram.
Thermaltake Bettle Cooler.
Printable View
Test Systems
Q6600 Go Rev. 4 Core Enable, 4260 MHZ Air.
Dfi X38 T2R/G
1000 Watt silverstone psu.
2x 512 mb ddr2 dual 800mhz ram.
Thermaltake Bettle Cooler.
Can you please explain to me how your temps can be so low at 4,2 ghz oc?
(I'm a noob at this stuff :) )
Awesome results anyways!
he lives in the arctic maybe =P
but seriously how did you do it?
Very nice :up:
This was the best SuperPi 1MB benchable I can do with my Q6600 G0:
http://pedrorocha.planetaclix.pt/Q6600_4223_Ar.jpg
What is your best SuperPi 1MB benchable speed?
1.163 vcore... wow
Not really, obviously CPU-Z readings where not correct - was near 1.6V if I remember.Quote:
Originally Posted by Nebulus
Of course 1.6v with Air (even with a good Tuniq) are not for 24/7 use but only for short benches..
@Pedro Rocha your cpu good clock:)
very nice clock man, especially for air... im jealous :)
Thanx you all.
ambient temps?
Nice for air but... I thought most G0's with a decent MB can do 4.2GHz? :confused:
That's very near what mine does on stock Intel cooler. With TT120/Zalman 9700, there's no way I can run more than 3.6GHz stable 24/7 though, temps/voltage are ridiculously higher
it's amazing what great coolers there are out there, cold weather aside, the new pipe setup's and great use of lapping, copper and fins are making air cooling much more efficient and viable.
Sweet numbers, got to love that q6600 Go and in the right hands it just sings. Great job!
Over 4ghz on AIR :shocked: :shocked:
The only way those temps are possible on air is if you live in the Arctic as someone stated. Seems you didn't answer the questions of how? What was the ambient temp for this overclock? Also what were your Timings and Voltages? Thanks
could i see memory timings on these by any chance? cuz i'm a whole .5 seconds slower at 4.1ghz on my q6600!
note i've disabled my other 3 cores for this run
http://i7.photobucket.com/albums/y26...st300/12-4.jpg
Impressive, which I have is b3 and I it take the maximum to 3851 oc, but for the bench down to the 3712 everything with cooler stock and with temperature environment of 5 degrees With Air conditioning
Bench NucleaRus Multi Core
http://img136.imageshack.us/img136/2...ton2cp5.th.jpg
OC MAX.
http://valid.x86-secret.com/show_oc.php?id=271611
Regards
This achieved our team,all on air,1.75v for cpu...
http://shrani.si/?9/Me/2F8yAV1A/spi11-312.jpg
http://valid.x86-secret.com/show_oc.php?id=319772
dear jesus... very nice!!! what kind of ambient temps are going on around you.. 1.75 is scary territory to venture into
Temp for super pi was about 76°C...That was with cold air,on window..Ambient was about 2°C and that was hot...This week is another season,but with DFI x38 and only 1 core...
That wasnt max,because he (Razer) have to go home and didnt have more time to test it... That cpu is mine,so we'll see how much will it go... Only barrier is our ambient temperature,all depends on how much will it be cold :D
For 3d mark it is stable with 4200@ 1.6v
And that 1.75 is bios set,so little down
EXpander - show us some PI 1M !!
Great OC youv'e got there
nice results
L737B@4.4Ghz on cold water
http://img247.imageshack.us/img247/5...1m44ghzlw1.jpg
4.35Ghz 3D stable
http://img141.imageshack.us/img141/9804/3dmarkss9.jpg
That's before I figured out teh OCP mod for 8800GT, I could redo it with 900Mhz core easily but I don't OC anymore.
P5k-Pro
Q6600 G0
2 x pc6400 xms2 Corsair (i had to review them)
H20 watercooling
VOLT: 1.7
Fsb wall: 452 :'(
http://www.hwbot.org/signature.img?iid=94833
İntel stock fan 4008 mhz 1.55 vcore