The Un-Official Q6600 Chest Pounding Proves Nothing Water Cooled Temp Thread!

I wanted to start a thread to give us water cooled members a place to brag about our low Q6600 temps.
Please report your ambient temp at the time of your testing.

My ASUS Maximus SE. My build thread for all the gory details is located here: http://www.xtremesystems.org/forums/...d.php?t=160606

System cooled on: WaterKegIII Xtreme, D-TEK FuZion CPU water block, D-TEK FuZion Nozzle Kit, D-TEK FuZion Pro Mount, EK-NB S-MAX Acetal Waterblock, Lapped CPU, SB heat sink Enzotech CNB-S1L, MX-2 used for my TIM on blocks, and AS Adhesive on the SB!

Ambient Temp at time of testing was 60°F or 15.5°C for all tests +/- 4°F.

My bone stock 2.4GHz Q6600 for a baseline set of numbers. Run time 35min.
http://img527.imageshack.us/img527/7248/run2px5jr8.jpg


3.6GHz, 35 minutes into OCCT.
http://img210.imageshack.us/img210/223/run4en3.jpg


One shot at 3.7GHz , only minutes away from successfully finishing 1 hour of hard labor. :cord:
http://img46.imageshack.us/img46/1661/run5sf9.jpg


My normal old every day 3.8GHz temps, 1 full hour into Prime95: :up:
http://img112.imageshack.us/img112/5362/run8ql4.jpg


My 3.9GHz temps only 20 skinny minutes into a short Barn Burner Run! .... :sonic:
http://img508.imageshack.us/img508/7388/run9ni3.jpg
Note: I did do a 3.9GHz run for 45 minutes, and cores went up to 53°C.

honestly the thread would be much better without all the pics. i'd rather just see straight temps.

Sounds good. :up:

System pictures removed, but screen shots are required to get full temp credit.

once again.

No 2 h2o systems are ever alike unless your cooling with the exact same eq with the exact length in tubing, with the exact bends cooling the exact cpu and hardware.

So you cant really compare 1 system to another. Hence why we are desperately polling martin all the blocks and eq so he can be a repository of data.

Meaning in setting up and performance of your h2o gear, its totally directed by YMMV depending on how well its looped up.

Ie. how many mounts.. how much head pressure... what fans... what voltage on fans... ambients taken... water temp... ect ect ect..

come on guys... this was a simple request to find the temps that users where getting. If you dont have a screenshot dont reply or post.

Just looking for general Q6600 numbers.... :)

Quote:

---

Originally Posted by wangerin

come on guys... this was a simple request to find the temps that users where getting. If you dont have a screenshot dont reply or post.

---

Thanks! :up:

Quote:

---

Originally Posted by Talonman

Just looking for general Q6600 numbers.... :)



Thanks! :up:

---

dude, repost your temps using CoreTemp
i really don't think Everest is the most accurate application :P
it would be interesting to see the difference

Quote:

---

Originally Posted by Talonman

Just looking for general Q6600 numbers.... :)



Thanks! :up:

---

lol.. maybe you havent noticed... this is XS system. The word general/generic is suposed to be left out on the front home page. :yepp:

coretemps and prime small ffts 1 hours (Atleast) are we looking for 100% stable here?

Personally I favor 1 hour, but in this format, what ever they wan't. The longer the better I supose for more bragging rights. :up:
I would say the spirit of this thread is more toward temps than stability. I just want to be convinced you heated the chips up.
I do know given extended time temps will rise a few more °C than you might see at the hour mark.

Quote:

---

Originally Posted by NaeKuh

lol.. maybe you havent noticed... this is XS system. The word general/generic is suposed to be left out on the front home page. :yepp:

---

But that rule is made in the spirit of testing, and recomendations to members. I believe that to be a needed standard in that case. :)

This is more about pride in ones system, and the water cooled temps they are currently enjoying in thier home environment.
I really didn't want to make this a scientific Q6600 temp grid thread, nor prove anything.
I just would like a spot to let us water cooled folks chirp up a bit about our low temps. :)

If the air cooled members come over for a visit, and we don't have any examples posted of what any water cooled members are getting for temps, how can we let the world know that water cooled boards have the potential to have super temps?

The Q6600 is a pretty common chip now too, and a heat thrower.

It's good for the business to let us brag. ;)

You can pick the format...
Add in any warnings you would like in the OP...
I'm easy going...

I just changed the title to: 'The Un-Official Q6600 Chest Pounding Proves Nothing Water Cooled Temp Thread!' :p:
That might help to clear things up some?

I wouldn't want to misslead the commoners to think they could hit my temps anyway.. :rofl:
The members that run their rig in a 60°F basement like me, are few and far in between I'm guessing? :)

All I ask is that your honest with whatever you post.

Quote:

---

Originally Posted by Janno

dude, repost your temps using CoreTemp
i really don't think Everest is the most accurate application :P
it would be interesting to see the difference

---

I am on Everest version 4.20.1227BETA and believe it to be very accurate with the Maximus SE.
I run Vista64, and don't want to disable my driver signing to run Coretemp.

Quote:

---

Originally Posted by Talonman

I am on Everest version 4.20.1227BETA and believe it to be very accurate with the Maximus SE.
I run Vista64, and don't want to disable my driver signing to run Coretemp.

---

fair enough


not to ruin the fun...
i'll post my temps when i have time to fiddle with the bios:)

Looking foward to it! :up:

any gpu blocks on your loop?

None so far... My nVidia 8600GT is just on air. Will be getting a new card soon. Currently just CPU and NB blocks in my loop.

Taking advantage of this cold Ohio day, I cut Prime loose for an extended run using my 'new improved' normal every day 3.8GHz settings:

My 4 hour error free run using my 3.8GHz settings. Room temp was a brisk 55°F or 12.7°C:
http://img216.imageshack.us/img216/8839/run10yv4.jpg

What else we gonna see...3 hours prime and 20C on all cores... :shrug: :clap:

I don't think I can get them that low, and 55°F is the coldest this basement ever gets! :)

Hoping to see more posts by others too... :yepp:

Note: My Motherboard sensor is always 15°F above ambient on my rig.

Hey Talonman... I'm running Coretemp on Vista X64


I found this at the DriverHeaven forums.

Make sure before you start the actual "CoreTemp.exe", you run "coretemp-startup.bat"


LINK

Quote:

---

Originally Posted by mcoffey

Well done!

Just curious. Do you actualy go down there and use the PC when it's that cold. Or did you move it down there to see how low the temps could go?

Either way, pretty intresting how ambient effects temps.

andyc

---

Yes I do, but ware a ski hat allot!! :) My temp is back up to a balmy 59°F.

Quote:

---

Originally Posted by zlojack

Hey Talonman... I'm running Coretemp on Vista X64

I found this at the DriverHeaven forums.
Make sure before you start the actual "CoreTemp.exe", you run "coretemp-startup.bat"

---

Thanks for the link zlojack!! It works, It works!!!
CoreTemp has officially been added into my Vista64 bit arsenal of utilities. :up:
http://img441.imageshack.us/img441/9671/run11ej4.jpg
Looks like my version of Everest is accurate on the Maximus SE too... :cool:

Nice OC Talonman.


I can't wait to get my WC build underway!

You won't regret it. Water cooling rigs rule!! :yepp:

Best of luck on your build buddy. :)

Hey there Talonman.

My rig:

Q6600@3.6Ghz (400x9) @ 1.40625 (in bios, real life... who knows :shrug: )
Maximus Formula
4GB OCZ 6400 Reaper EB @ 960Mhz (5\5\5\18)... need higher trfc on this board.
8800GTS 512
Auzen Prelude
Assortment of Raptors and other shiz......

My loop has just the cpu (unlapped) and gfx on it. A 50z for the pumpage, Fuzion with quad shizzle, an MCW60 and for some radiator action i went with an MCR320 and a Thermochill HE120 i got cheap off egay. I've also used copper elbows in the loop because i cant stand the kinkage in a mid-tower case (Lian-li PC60) using this lame tygon tubing i got. Temps improved with elbows by the way if you're interested, well for me anyway. Everything is internal.... boy was it a squeeze! Oh, except for my psu (HX620) sticking out the back..... lool.

With an ambient of around 24C, my temps when priming small fft's were exactly 60C on the hottest core down to 56C on the coolest (Coretemp). I noticed that it was easier to pass prime on small fft's rather than blend which needed a few extra notches on the vcore when it got to the 896K test. This rig is 6 hours prime (blend) stable. You'll have to take my word for it as there is just not enough hours in the day for me to sit there watching prime do....... well, not much really. I dont run my fans at full speed (yate loons, HL's and a scythe for the HE) so i could maybe shave a couple of degrees off but i like the quietness and i know i've got headroom for the summer.

I might take my cpu higher, i think its got some more left in her but for now it will do nicely, you can tell i dont like stability testing cant you. Once i deem my rig stable i prefere to game, make music, watch films and look at boobs. Prime and occt just dont have the visual impact to keep me glued to the screen for very long.

Anyways, there are my temps. I hope you likey, eh?

Cheers :toast:

Dan.