MM H2gO 10 lbs of **** in a 5 lbs bag

Just finished building a new rig for a friend / customer. An I thought I would share it with the great people of XS.

I was very hesitant at first with using this case as of lack of information and ideas from other builders. However it did turn out to be very fun and entertaining process.

The case does make for a very tight fit but i feel it looks amazing when all said and done. I hope this thread may clear any questions for others as well help with ideas for anyone thinking of purchasing this MM case.

The water cooling set-up includes the fallowing:
2 x PA120.2
1 x PA120.1
2 x EK R600 WB
1 x Fuzion CPU WB
2 x Laing D5
1 x Dual 5.25 Bay Res

Loop order =
CPU > PA120.2 > VGA's > RES > PUMPS > PA120.1 > NB > PA120.2

Last but not least the pictures hope you enjoy :D

http://i137.photobucket.com/albums/q...Picture031.jpg

http://i137.photobucket.com/albums/q...Picture038.jpg

http://i137.photobucket.com/albums/q...Picture029.jpg

http://i137.photobucket.com/albums/q...Picture039.jpg

http://i137.photobucket.com/albums/q...Picture027.jpg

http://i137.photobucket.com/albums/q...Picture019.jpg

http://i137.photobucket.com/albums/q...Picture026.jpg

http://i137.photobucket.com/albums/q...Picture022.jpg

http://i137.photobucket.com/albums/q...Picture024.jpg

http://i137.photobucket.com/albums/q...Picture009.jpg

http://i137.photobucket.com/albums/q...Picture015.jpg

http://i137.photobucket.com/albums/q...Picture012.jpg

http://i137.photobucket.com/albums/q...Picture008.jpg

http://i137.photobucket.com/albums/q...Picture006.jpg

http://i137.photobucket.com/albums/q...Picture007.jpg

http://i137.photobucket.com/albums/q...Picture004.jpg

wow thats alot going on in a smaller case, great job for sure.. awesome the way you set it all up :)

Looks super!! :up:

That's very great and the title is right :D

Quote:

---

Originally Posted by Xilikon

That's very great and the title is right :D

---

Yes :D

Excellent build
I was playing wheres waldo with your hardrive/hardrives but I cannot find him!

I noticed one problem with this build. The front 220 is either sucking in cold and or pushing through hot air.
If it's sucking in cold air, I would push mesh on the top. Otherwise all the radiator heat will turn this into a heat box

Fantastic job! The symmetry of those water lines is excellent. Frankly, I've got mixed feelings about the back-to-back pumps, connected with elbows, but it sure is aesthetically pleasing! :tu:

Thank you everyone very much for all the great words :)

Here is the happy hardrive....

http://i137.photobucket.com/albums/q...Picture005.jpg

Very Shweeet! Nice build, and fast too!

Wow! (Checking out the manufacturer's website...) I would have never guessed that the case was *designed* for all of those radiators!!! For what it's worth, I would lose those side panels, and replace them with a single piece of formed plexi. :cool:

Edit: Err, I'm not suggesting that you get rid of the I/O panel.

Quote:

---

Originally Posted by zLynk

Wow! (Checking out the manufacturer's website...) I would have never guessed that the case was *designed* for all of those radiators!!! For what it's worth, I would lose those side panels, and replace them with a single piece of formed plexi. :cool:

Edit: Err, I'm not suggesting that you get rid of the I/O panel.

---

Absolutely, This case with the current side panel and top panel i feel is definitely taking a lot away from the inside eye candy. Especially the lower portion of the case as well.

MM should offer different side panels as they do with other cases.

Beautiful job. Excellent work with an excellent case.

One ?: What PSU is used in this? I can see that it's not modular, but I don't recognize the cables. Just curious... because if I didn't know to look for it I wouldn't see it at all, I'm amazed you managed to hide all those cables.

wow! such a clean build, very impressive. bet it looks great in a dark room

Well done mate free internet beer on me:)

Quote:

---

Originally Posted by Fujimitsu

One ?: What PSU is used in this? I can see that it's not modular, but I don't recognize the cables. Just curious... because if I didn't know to look for it I wouldn't see it at all, I'm amazed you managed to hide all those cables.

---

I'm going to venture a guess.

The cabling suggests that its a ToPower-made unit. If you look at oneof the pictures of the rear of his case, the PSU fan says that its a Tagan. My guess is that its a 900, 800 or 700 watt model because its a regular sized PSU.

OP, you need to teach me! I can't even manage to get my setup inside a Mozart TX:ROTF: :shrug:

BoostFed,

That is an awesome job and the build is stunning!

Shouldn't you cover up the Thermochill fins at the back because they are quite fragile ?

Utterly stunning execution.

Job well done.

Quote:

---

Originally Posted by IanY

I'm going to venture a guess.

The cabling suggests that its a ToPower-made unit. If you look at oneof the pictures of the rear of his case, the PSU fan says that its a Tagan. My guess is that its a 900, 800 or 700 watt model because its a regular sized PSU.

---

Quote:

---

Originally Posted by Fujimitsu

Beautiful job. Excellent work with an excellent case.

One ?: What PSU is used in this? I can see that it's not modular, but I don't recognize the cables. Just curious... because if I didn't know to look for it I wouldn't see it at all, I'm amazed you managed to hide all those cables.

---

The PSU used is a Tagan 1100W unit as seen here,

http://www.performance-pcs.com/catal...ducts_id=20534

Quote:

---

Originally Posted by clone38

Well done mate free internet beer on me:)

---

Cheers :toast:

that very kool man. post your clocks and temps!

Quote:

---

Originally Posted by IanY

BoostFed,

That is an awesome job and the build is stunning!

Shouldn't you cover up the Thermochill fins at the back because they are quite fragile ?

---

I'm with you on all that. Amazing build (I wanna make a tiny watercooled PC sometime!) and I would put something over those fins in the back. Even just some wire ring grills would help protect it.

Woa that looks like a very nice build I like how the mobo sits on that plexiglass like that

Great job :up:

Let me add to the congratulations ... and beautiful pictures too! Love the clean build.

The only thing I'm not sure about on that case is having the I/O panel on the side ... guess it will work okay for some desktop arrangements, but it's a bit strange.

Very nice job man nice and clean and in a small package. I can some what under stand your title. I myself am working on a U2-UFO Duality with about everything in 2's with Phase its driving me crazy trying to fit everything and slow going as I want it to look good. Again man great job.