E6850 L723A943...in progress

We're limited like always only by ddr...more voltage on it and more mhz on cpu :)
We hope to find some good stix soon! Btw with this crucial we gained a little bit.
http://www.ripping.org/signature.php?cpuid=541
(-171.82Mhz from Wr :))

P5K Vanilla (pcb china, REV 1.02G, VPll,Vdimm,Vdrop,Vcore@OVP)
E6850 L723A943 @ 1.92v
Crucial Ballistix Tracer PC8500 @ 2.9v
VGA S3 Virge PCI
WD Raptor 74Gb
OCZ Powerstream 520W (VIO 3.49v)
LN2 Pot from Little Devil
NB & SB Cooling By Lunasio-Cooling.it
Bench Table By Dimastech
Boot @ 600x9

5741.78 MHZ

http://valid.x86-secret.com/cache/281648.png

Validation HERE

http://www.xtremehardware.it/forum/p....php?n=712&w=o

Looool Here you can see us trying get up temps too low (too much LN2 in da pot :rofl: ) running some spi @ 5640mhz -158° :D
But LN2 won and Coldbug arrived :rolleyes:
http://it.youtube.com/watch?v=6P82x3ALOC8

Nice clock my friend, now, find a new memory and catch the WR ;) ;)

wowwww nice fsb, keep pushing guys :clap:

nice results and always nice to see the setup :)

Your Ballistix 8500 can't do better than 638 5-5-5 at 2.9V??

You must have some very bad samples, mine run close to 690 5-5-5 with 2.55V 1M stable.

Did you try to lower the voltage, perhaps they run too hot?

Quote:

---

Originally Posted by Zeus

Your Ballistix 8500 can't do better than 638 5-5-5 at 2.9V??

You must have some very bad samples, mine run close to 690 5-5-5 with 2.55V 1M stable.

Did you try to lower the voltage, perhaps they run too hot?

---

Do you know the difference between divisors and 1:1 ? :D
With divisors we can get over 700mhz ;) The problem is with 1:1 at this fsb and frequency. Of course we tried from 2.6v to 3v and we can see the better only with more voltage in 1:1...we are waiting for adata 9600 and teamgroup 9600
:rolleyes:

You mean running 1:1 is harder on the memory than with a divider?? :confused:

I don't see how that effect memoryspeed, i can imagine it will be harder on the chipset but not on the mem itself but i'm sure you guys know what you're talking about.

I would have thought it's just fsb running out of breath.

Good luck pushing it. :up:

Maybe you're right,couse we have mch and fsb at stock value :D no mod on it
Btw i'm talking about memory couse pushing up voltage on ddr we gain on fsb and mhz :shrug:
We'll try on week to mod mch and fsb ;) And with 0414 Bios that seem to be the better...now we are with latest

Wow what a frequency ... ! :shocked: :eek: Nice result guys, grab a WR-capable DDR2 kit (:up: :D) and crush the WR ;) All the best ! :)

thats one nice frequency guys nicely done :toast: show us some benchmarks too, wont ya :D

Wow thats a amazing FSB.

Nice job :up:

Thanks All...now we've chipset problems...we'll try to change mobo soon till another mars come back :)

Today we tried to mod vmch @ 1.83v and lower vpll till 2.33v... a little better for our fsb :D :rofl:
http://valid.x86-secret.com/cache/284724.png

Validation HERE

Also max Freq increased to 5781 anyway we're sorry but we don't have validation :rolleyes:
So we tried to do some superpi,timings not so tight but we'll try soon for under 9" score...
Here what we done today :p:

http://www.xtremehardware.it/forum/p....php?n=733&w=o
Stay Tuned!

Really impressive, looks really good, it is an amazing chip you guys have there.

Keep pushing it.

660 fsb?? lol!!

Great job guys