Hey, just thought id post my results on here, because they are pretty xtreme and all.
Scotty1991 | Crucial Ballistix PC2-5300 | DDR-667 (Stock) | DDR-1365 (Overclocked) | 5-3-3-15 (Stock) | 5-5-5-5 (Overclocked) | 2.3 | CPU-Z Verification |
Printable View
Hey, just thought id post my results on here, because they are pretty xtreme and all.
Scotty1991 | Crucial Ballistix PC2-5300 | DDR-667 (Stock) | DDR-1365 (Overclocked) | 5-3-3-15 (Stock) | 5-5-5-5 (Overclocked) | 2.3 | CPU-Z Verification |
Nice Dual Channel clocks man! :up: See how high you can bench and then post here!
http://www.xtremesystems.org/forums/...d.php?t=150389
Hmmm, seems to be a very good Kit of the 5300 BallistiX.
Awesome result ;) - 682,5Mhz @ only 2.3V
my question would be.. is it stable 24/7 at speeds/volts like this???
i am in doubt that a fan could keep these sticks running stable and cool for atleast a few months. i ask this because i also have the aa667's
This is surely not stable, might be Pi 1M stable, but not many more.
If it's 32M stable it would be veryveryveryvery great RAM,
and 24/7 stable is definetly impossible, I think.
They're also a very good pair of the 5300 DIMMs,
these Speeds you normally reach with some 8500 DIMMs,
but there are also only a few with 2.3V at this speeds.
Nice, these look like they could easily be DDR-1200 5-5-5-15 24/7 sticks at very safe voltage. :up:
Im running them 1200 4-4-4-12 atm, stable, but yes, at those speeds above it is 1m stable, Im doubtful of 32M stablility.
As for cooling, I have duel 80mm fans blowing air accross the ram.
680+Mhz @2.3v？
OMG
WoW! nice! :DQuote:
Originally Posted by scotty1991
Very nice.:)
awesome ram whats max orthos stable?
I don't see any screenies. :confused:
How about Crucial PC5300 @ 651Mhz 5-5-4-10 2.45V PI 32Mb run I think these will be for benching :D
http://www.livinglarge.pwp.blueyonde...-4%202.45v.JPG
Have you a screen with Easy Tune for showing the voltage :D
Im not currently running that ram, atm im using 4gb geil ultra 800mhz.
=] My ram is waiting for my new E6750 and Blitz Forumla
Geez, what's going on with speedbinning at Crucial? :shrug:
The PC5300 seem to be even better than the PC8500.
I want my money back! :D
I got my Crucial PC-5300 up to 612Mhz @ 2.3v and 588Mhz @ 2.25v. So far SuperPi 1M stable. I will try with tighter timings and try to run 32M or Prime. Note: the default timings were 5-7-7-24!
-------------------------------------------
Asus P5K Deluxe / E6300 @ 3430Mhz, 1.375v / 4x1G Crucial 10th Anniv. PC-5300 / ATI X1950 Pro / Seagate 320G & 250G / Hec AcePower 420w / AC Freezer 7 Pro / CoolerMaster CM690 case w/ 6 -120mm fans
nice clocking but Crucial 10th Anniv. PC-5300 will surely overclock well, D9GMH chips
yep, the Crucial 10th Anniv. are supposedly handpicked D9GMH, although most pundits claim they are identical to Ballistix. I tested 2x1G of Ballistix PC6400 with this same setup and their default timings were 5-5-5-18 at 490Mhz, while the 10th Anniv. default is 5-4-4-15, with identical settings. This could just be due to the factory default settings, as the Ballistix PC6400 were rated at 4-4-4-15 @ 400Mhz and 5-5-5-18 @ 500Mhz with 2.2v in CPU-z...while the 10th Anniv. have only 200, 266 & 333Mhz (5-3-3-15 @ 1.8v) default settings . They defaulted to 5-7-7-24 @ 612Mhz. I could post but not open Vista at 674Mhz, the next step up in the bios, even with 2.4v. I will tinker more with the settings or perhaps try o/c with only 2G ram.
Cool GMH rams ;) Ur CPU Vid: 1.16X WOW :clap:
10th Anniv. should usually be better than the normal PC-5300 .
As I know CoreTemp 0.95 reads diffrent Vids - or is this only at E2xxx CPUs ?Quote:
Ur CPU Vid: 1.16X WOW
http://img407.imageshack.us/img407/5645/345zw7.jpg
hi , this is 5300 bought in june 2006. 2.1 V here , but not stable...just to show what my kit does paired with a X38 mobo
my Crucial 10th Anniv at 2.45v... in this week i will try for 700mhz club
i have allready done 681 with 2.55v but i dont have ss.....:(
so i post this............
Wow... nice... I think im going to order some tonight. :)\
Ordered! Thanks a plenty guys!