can ya say 5Ghz Quad!!!

Printable View

Show 100 post(s) from this thread on one page

11-09-2007, 02:24 AM
dinos22

Yorkfield in the house fellas > warmup under SS phase > can ya say 5Ghz Quad!!!

OK so i finally was able to get a nice toy (on loan from Ms. Intel Australia :) thanks for that). These will be short and sweet bench sessions and fingers crossed it all goes well before final LN2 soon.

Note: this chip is as hot/cold as E6750 or E6850 CPUs i've tried :cool: :D >>> i mean WTF 1.76V benching 3DMARK06 at 4.84GHz and maintaining around -46C on evap loaded until it gets to CPU tests and clonks out around -44.3C heheh

http://img409.imageshack.us/img409/4...teppingts0.jpg

Test Configuration:
Gigabyte X38-DQ6 DDR2 Motherboard (F6a bios)
Intel Core2 Extreme Quad QX9650
2GB DDR2 Corsair Dominators PC10000
Single 8800GT PCIe 2.0 512MB Graphics Card (Stock cooler)
Corsair HX620 Power Supply
Blackbox 1HP Rotary SS
80GB Samsung SATA Hard Drive
Windows XP Pro 32bit

CPUz 5GHz
http://valid.x86-secret.com/show_oc.php?id=265522

http://img221.imageshack.us/img221/939/cpu5003vk8.png

Hexus PiFast 19.31 @4.8Ghz

http://img48.imageshack.us/img48/187...4818mhzmu5.png

Aquamark3 = 273,146 :eek: with 4846Mhz on CPU and 712/999 on 8800GT

http://img208.imageshack.us/img208/4...846mhz7ds0.png

3DMARK01 = 84,042 :woot: 4.8Ghz and 700/999 on 8800GT :cool:

http://img134.imageshack.us/img134/8...42600mhdn3.png

32M wPrime = 8.484s

http://img149.imageshack.us/img149/1...4818mhzwl0.png

32M SuperPi = 9m 53.500s @4818Mhz 602Mhz on RAM 4-4-4-8 2.42v

http://img232.imageshack.us/img232/8...0s4818mcn6.png

1M SuperPi = 9.438s @4890Mhz 611Mhz on RAM 4-4-4-8 2.42v

http://img80.imageshack.us/img80/535...pi9438szn6.png

this is just a little warmup for some of the things i will be doing with this little sucker in the next few weeks :cool:

i can also bench at higher clocks....i think i was doing 1Ms around 4970 or so from memory and 32M stopped half way around 4.9xGHz heh
11-09-2007, 02:25 AM
dinos22

some more runs below :)

Quote:

Originally Posted by dinos22

did some more last night check it out fellas :D

some at 4.8GHz :D:D:D:D

http://img251.imageshack.us/img251/1...04600mhzz7.png

http://img204.imageshack.us/img204/6...81600mheu1.png

http://img520.imageshack.us/img520/7...46600mhqx8.png

http://img101.imageshack.us/img101/8...86600mhdk6.png

Quote:

Originally Posted by dinos22

and then some past 4922-4973GHz :D

http://img152.imageshack.us/img152/8...953mhz7hm8.png

http://img257.imageshack.us/img257/7...6627606jv8.png

http://img526.imageshack.us/img526/7...6387610rv8.png

http://img524.imageshack.us/img524/4...6703610ye5.png

http://img208.imageshack.us/img208/8...9650497in6.png

Quote:

Originally Posted by dinos22

also figured out how to get those extra ~45-50MHZ FSB out of the CPU

Static tRead Value =9 ;) on Gigabyte boards :D

http://img526.imageshack.us/img526/1...6stablenc3.png

Quote:

Originally Posted by dinos22

yeah that's fair enough

DRY ICE RUNS....

i had an unproductive run due to motherboard OVP problem with selecting 1.9v in bios (mobo refuses to boot in 90% instances)
another issue is vcore drop & droop >> all up at 1.9v selected in bios i get ~1.79v load :( in windows so i spend a million hours troubleshooting and in the end the board just wouldn't boot at those volts any more so just gave up

i have a modded DDR3 board coming in so there won't be any more of such problems

at the end of the night i did a quick 1M and Aquamark3 runs

man i wanted to see sub 9 second Pi for some long :D

SuperPi: 8.969s
QX9650@ 5150MHz 1.79v load
DRY ICE (k|ngp|n Dragon Evo 2.4 pot)
-70C on the pot > -63C on CPU but it's a bit whacky i think probablt -57C whacky because it was showing -79C/-80C on stock clocks in bios

http://img520.imageshack.us/img520/7...674c09ahk3.png

Aquamark3: 280,988
QX9650@ 5150MHz 1.79v load
DRY ICE (k|ngp|n Dragon Evo 2.4 pot)
-70C on the pot

http://img215.imageshack.us/img215/1...675449ffb4.jpg

i did some nature and Lobby low runs as high as 5160 just haven't put together any scores LOL
with stable volts on CPU at 1.85v load this chip would easily bench 5.2Ghz on DICE

.....

aaaaaaaaaaaand some more :D

did some more Single Stage last night with Gigabyte 8800GTS 320MB GFX Card

I have to say this is the best card i've ever seen man....OCs like crazy on stock air.....i benchmarked as high as 729/1890:eek: /1000

picked up some World Records with it too and others were close but not close enough :D

Test Configuration:
Gigabyte X38T-DQ6 DDR3 Motherboard (F2 bios)
Intel Core2 Extreme Quad QX9650
2GB DDR3 Corsair Dominators 1800 CAS7 (Damn Corsair makes nice RAM :D)
Single 8800GTS PCIe 2.0 320MB Graphics Card (Stock cooler)
Corsair HX620 Power Supply
Blackbox 1HP Rotary SS
80GB Samsung SATA Hard Drive
Windows XP Pro 32bit

here is what SuperPi with lovely Corsair DDR3 dominators looks like at 5Ghz :D

http://img165.imageshack.us/img165/1...pc14400ed1.jpg

http://img80.imageshack.us/img80/111...pi9031sok0.png

http://img210.imageshack.us/img210/5...5b2e44bvi0.png

http://img152.imageshack.us/img152/6...5b3f398sl1.png

http://img259.imageshack.us/img259/4...5b47bf3wu2.png

http://img49.imageshack.us/img49/695...5b4ebc4si9.png

http://img516.imageshack.us/img516/5...5b55403ml2.png
11-09-2007, 03:24 AM
1Day

That is some sweet benching Dino:) enjoy your new toy.:up:
11-09-2007, 03:31 AM
dinos22

Thank you 1Day :D
i will :)
11-09-2007, 04:08 AM
RLM

Unbe:banana::banana::banana::banana:inlievable:up:

RLM
11-09-2007, 04:12 AM
Richard Dower

Y'all should be using Vista to do these kinda tests though.
11-09-2007, 04:20 AM
BNDMOD

Goodd very good.... i wait mine chip :d nice score... i wait for result with 8800 GT SLI :d
11-09-2007, 04:21 AM
dinos22

who seriously benches vista :s

i can understand PCMARK05 but rest is just suicide
11-09-2007, 04:23 AM
BNDMOD

Yeah.. who bench into vista.... i think a few guys :s
11-09-2007, 04:33 AM
newls1

Dinos22...........I wish I had the "contacts" that you seem to have. I wish I could get an "ES" to test, hell even if I have to send it back, it would still make my YEAR!!!
11-09-2007, 05:28 AM
hipro5

Heh, heh, heh.....You :banana::banana::banana::banana::banana:...!......ONLY 1.744VCore...... :p: :D
11-09-2007, 05:56 AM
metro.cl

Keep pushing it :)

LN2 is a must!!!
11-09-2007, 06:03 AM
dinos22

Quote:

Originally Posted by hipro5

Heh, heh, heh.....You :banana::banana::banana::banana::banana:...!......ONLY 1.744VCore...... :p: :D

damn it hahahaha :D

OVP on mobo kicks in at 1.85v on this board lol so needs to go to my mates at Gigabyte for their engineers do remove it like the others ;)
11-09-2007, 06:03 AM
dinos22

Quote:

Originally Posted by metro.cl

Keep pushing it :)

LN2 is a must!!!

thanks Filipe
of course of course :D
11-09-2007, 06:08 AM
Speederlander

How stable is it at those levels? Can you prime for an hour at 5 ghz with the phase?
11-09-2007, 06:12 AM
dinos22

Quote:

Originally Posted by Speederlander

How stable is it at those levels? Can you prime for an hour at 5 ghz with the phase?

no
it was crapping out at 4.84Ghz 3DMARK06

why would you prime with exotic cooling dude that makes no sense at all :confused:
11-09-2007, 06:40 AM
Aldy402

wow Im gonna call my educational intel contact right now!
thanks for the benches DINO,can you do a 3dmark06?
11-09-2007, 07:03 AM
Charles Wirth

Not a bad start but you gotta pick up that bus more and probably kick over to DDR3.

1.76v is a lot for single stage. Hopefully it is a solid 1.76v.

Any bandwidth screenshots?
11-09-2007, 07:12 AM
dinos22

Quote:

Originally Posted by FUGGER

Not a bad start but you gotta pick up that bus more and probably kick over to DDR3.

1.76v is a lot for single stage. Hopefully it is a solid 1.76v.

Any bandwidth screenshots?

Hi charles

this CPU :banana::banana::banana::banana:s itself at anything over the 408MHz FSB :(

Gigabyte has a droop on their boards so 1.8 becomes 1.76v under load as far as i remember now

i don't really do bandwidth shots because i never use it and means nothing in my routines. I let my memory tweaking show through SuperPi primarily and then others memory dependent benchmarks that are revolving around HWBOT entries firstly and then other interests i have

the X38T-DQ6 hasn't shown up on my doorstep today as it was supposed to so no DDR3 this weekend
11-09-2007, 07:24 AM
ante_ante

Nice scores ^^

What do u think about the F6a bios ? Have u tried some other bios ?
11-09-2007, 07:26 AM
dinos22

Quote:

Originally Posted by Turbodream

Nice scores ^^

What do u think about the F6a bios ? Have u tried some other bios ?

i just jumped from F3 to F6b which was the latest beta bios

F3 i benchmarked that nice E6750 past 600MHz FSB which i had to knock back to around 570 or something on this bios :( bit since F6b supports penryn i haven't got a lot of choice
11-09-2007, 07:44 AM
vanovich

nice work dinos ,looking forward to seeing it under ln2.
11-17-2007, 03:51 AM
MorGo7h

Give it some ln2 :D
11-17-2007, 04:24 AM
dinos22

next weekend i promise :D

got some more numbers tonight though :)
11-17-2007, 04:35 AM
nachthymnen

Great start Dino!!!:D

OT:
Next week I'll receive mine and I'll put immediately under my 1HP SS:D
Do you think it's possible to close the 1M over 5/5.1Ghz under phase?
Mine is capable of those temps with an E6850 @ 1,42V in idle:
http://www.pctunerup.com/up/results/...4_Immagine.jpg

Congratz again for the start!:clap:

Show 100 post(s) from this thread on one page