CellShock DDR3-1800 8-7-6-21 Testing!

It's been a long time ( ? maybe for me to say :D ) since I've tested/presented a new DDR3 kit here.
Well, it's 'bout time I do that again :D

This is the very first test with the latest CellShock retail kit, the DDR3-1800 8-7-6-21 2GB Dual Channel Kit ( part # CS3222580 ) rated at 1.7V - 1.9V

Many thanks Sascha ;)

I haven't done any "real" tests yet ( as I had to do some measurements for a high priority review ) but starting from today, I will be playing with them and some other DDR2 & DDR3 kits for the corresponding reviews & roundups.

Just did some tests with those sticks at DDR3-1800 6-5-5-18 1T and the Q6600 @ 3.6GHz ( 450MHz x8 ) to check a just volt-modded VGA.

SuperPi 1M & AquaMark 3 stable @ DDR3-1800 6-5-5-18 1T for a start :)

Time is not tweaked, pure run in a "normal" WinXP installation used for the VGA review already :p:

http://i21.tinypic.com/333aeis.jpg

nice score Bench! :up: what about vdimm?

Looking to buy this ram so this thread will be interesting.

your welcome bill :toast:
good to see that they arent catching dust :D
They run 1800 655? :o
please go easy on the volts and dont fry them! :sofa: :lol:

EDIT: what board is this on?

Asus P5K3 Deluxe ( not modded yes, so no explosion mode :p: )

They seem to do good at 7-6-5-18 as well :D

This weekend they'll be used for my benching with some CPUs and LN2, and in the next week I shall have everything ready for the review & finishing up the roundup after that :D

Ain't gonna lose a single Hz out of them :D

I want to see that vga vmod

Really nice kit you got there :)

DDR3 Memory Kits testing week! Yay!

Just did a quick SuperPi 1M test with this kit...
CPU 3521MHz ( 503x7 )
FSB/DRAM 1/2
RAM DDR3-2012 7-7-7-15 1T Command Rate

1M Score = 14s 343ms

CPUz Validation
Screenshot...not available.
I've captured it in video with my cellphone from BIOS to final SuperPi 1M result.
Gonna upload the video later on ( have to re-encode it, etc )

p.s.1. Everest v420 Memory Read score = 12003MB/s at the settings mentioned above.
p.s.2. Memory was stable for SuperPi 1M/2M ( not all runs of 2M ) and WinRAR Benchmark

More tests later on :)

@saaya & BenchZowner,

Running 2,1 Volt on my pair of sticks on a 24/7 basis. Is this too high 24/7 or is it in your opinion possible to go higher without frying them?

In advance, thanks for all input.

Rob

Quote:

---

Originally Posted by Rob Halford

@saaya & BenchZowner,

Running 2,1 Volt on my pair of sticks on a 24/7 basis. Is this too high 24/7 or is it in your opinion possible to go higher without frying them?

In advance, thanks for all input.

Rob

---

It's still kinda early to say something 100% "safe" about the D9GTR ICs, but from the looks of it, the max safe 24/7 voltage should be 2.0V

Higher than 2.1V for 24/7 doesn't sound like a good idea.
I'm not saying that they'll definitely degrade or die, but it's not the best idea.

p.s. I hope you have the DIMMs cooled by a fan at anything over 1.85V

Some more quick tests:

http://i4.tinypic.com/871rms5.jpg

http://i7.tinypic.com/6y0slrm.jpg

http://i14.tinypic.com/8e0ez60.jpg

Looks good and that kit is really good ;).

keep pushing it.

Yep.......That's my boy....... :D :up:

Looks good, thanks Bill. :toast:

So 3600 450x8 DDR3-1800 6-5-5-18 1T is not even quicker than 3605 450x8 DDR2-1080 5-5-5-15 2T in 1M?

Nice bandwidth though.

Is this a retail kit? Did you spend your money on it, or is it a review sample?

Quote:

---

Originally Posted by fhpchris

Is this a retail kit? Did you spend your money on it, or is it a review sample?

---

Review sample, handed by our trusty friend Sascha ( Saaya ) :)
It's not handpicked neither a cherry-picked review sample, but from what he saw, he told me that it's a Blue Kit that accidentally got those black heatspreaders.

More details, ask Saaya...I'm off to hit the roads now ( yay! )

Nice results!

I am testing an Review-Kit too, but only a kit with black heatspreaders. Sadly my cpu doesn't run with a FSB of 500Mhz. So i can't test the 1000Mhz. Now they are running with 900Mhz @ 7-6-5-15 @ 1,92V.
In the next days i will test my retail kit.

900Mhz @ 7-6-5-15 @ 1,92V tested with Prime

Subtimings: 50-6-16-16-2-8-2-6-16383T

http://www.abload.de/thumb/prime36009007-6-5-159m5.png

Any Super Pi 32M results?

Here another test from me with 4000Mhz. But the Gigabyte is slow. I hope i'll get my Blitz Extreme back soon from Saaya :) Or maybe i will buy from him a P5E3....

http://www.abload.de/thumb/32m4000mhz2ue7.png

i still cant believe you cant select cmd 1t on the gigabyte board 0_o
its a p35 dq6 right? weird... i havent heard about the inability to set cmd 1t before... but then again not too many people use that board.

about the p5e3, wait until im done modding this board, im not too sure itll surive that :lol:

I can't believe it too ;) But i haven't seen anybody with this board and 1T... and i a german forum someone told me, that the DQ6 can't run with 1T.

Here anonter 32M-time with 4100Mhz:

SuperPi 32M:

E6850 @ 4100Mhz / Cellshock DDR3-1800 @ 912Mhz @ 7-6-5-15

http://www.abload.de/thumb/4100mhzspi32m2ng6.png

Everest:

E6850 @ 4100Mhz / Cellshock DDR3-1800 @ 912Mhz @ 7-6-5-15

http://www.abload.de/thumb/everestbenchhbg.png http://www.abload.de/thumb/everestkopier55t.png http://www.abload.de/thumb/everestlesetfy.png http://www.abload.de/thumb/everestschreibq9v.png

:D Perfect timings SeLecT. Just got 940MHz 1T stable with it so far:

http://img340.imageshack.us/img340/3...3ghz32mzs2.jpg

:welcome:

nice! :toast:

Has anybody seen a Performance Level = 4 (my latest archivement) on them yet?.... :D

http://www.hipro-tech.com/images/hip..._860_990_1.png

Rams are at 1T like Memset shows but cpu-z 1.42 can't track them.....Though V. 1.41 works just fine... :)

.

wow, pl4 must be fast, damn :D

Quote:

---

Originally Posted by hipro5

Has anybody seen a Performance Level = 4 (my latest archivement) on them yet?.... :D

http://www.hipro-tech.com/images/hip..._860_990_1.png

Rams are at 1T like Memset shows but cpu-z 1.42 can't track them.....Though V. 1.41 works just fine... :)

.

---

Volts?