Minsk XTReme mkII (-13*C @ 605W)
Hello
That's chiller for mine good friend PMP . He want to cool using it whole config like :QX CPU (QX6850ES now), 2* 8800 ULTRA, Asus Striker mobo - as You can see quite hot stuff :D. That's second edition of his chiller, first was build on smaller aspera compressor, and small condensor and just can't cope with so huge load :-/ . So I decided to built it completelly new.
Name of chiller is taken from legendary (in Poland) russian refrigerator :D .
Specs :
compressor: Rotary 6826 BTU
heat exchanger: plate HX 12 plates
XV: Danfoss TS2 + Frigomec 0.88l receiver
condensor: 1.9kW cooled by orginal 230V fan
refrigerant : R134a (finally)
case: metal case 46 x 46 x 46 cm, black powder coating
others: electronic controller Dixell XR20C, one 230V fan 250mm on the back of case, Laing D5 pump, Swiftech small reservoir.
http://www.members.lycos.co.uk/piotres2/pmp/3.jpg
Laing D5 + Swiftech res. :D .
http://www.members.lycos.co.uk/piotres2/pmp/4.jpg
http://www.members.lycos.co.uk/piotres2/pmp/5.jpg
http://www.members.lycos.co.uk/piotres2/pmp/6.jpg
http://www.members.lycos.co.uk/piotres2/pmp/7.jpg
http://www.members.lycos.co.uk/piotres2/pmp/8.jpg
http://www.members.lycos.co.uk/piotres2/pmp/9.jpg
Around -30*C with no-load on pure R507 . :)
http://www.members.lycos.co.uk/piotres2/pmp/10.jpg
Power consumption when chiller is cooling liquid , as You can see on pic rotary musn't be so hungy :D .
http://www.members.lycos.co.uk/piotres2/pmp/11.jpg
http://www.members.lycos.co.uk/piotres2/pmp/12.jpg
http://www.members.lycos.co.uk/piotres2/pmp/13.jpg
-13*C liquid on 605W heater :D . Pure R507.
http://www.members.lycos.co.uk/piotres2/pmp/14.jpg
Finish :) .
http://www.members.lycos.co.uk/piotres2/pmp/15.jpg
http://www.members.lycos.co.uk/piotres2/pmp/16.jpg
Chiller has been on one polish ocer meeting in Gdansk :) . There is had been cooling Asus Striker mobo, liquid was around -25*C all the time :) .
http://www.members.lycos.co.uk/piotres2/pmp/17.jpg
But condensation with R507 was too big, liquid was just WAY too cold :ROTF: . So decision to try R507 and 134a blend. Temp on 605W load with that blend.
http://www.members.lycos.co.uk/piotres2/pmp/18.jpg
But for owner...it was too cold still :shocked: . So finally I put pure R134a, temperatures are like +2*C@605W . :yepp:
I hope that owner will post some pics here in future :).
Regards
Peter