Here is one example of some of the information lost in the shuffle:
-Check Asus website for bios updates regarding ASUS Maximus Formula and ASUS Maximus Formula SE. Remember there are not removable bios chips for these boards. You use any bios on this forum at your own risk!
-You get better N/S Bridge temps when you remove the factory TIM and apply AS5 Ceramic.
-When updating from one bios to another
RESET YOUR CURRENT BIOS TO STOCK, NONE OC SETTINGS BEFORE FLASHING
-If the fusion water block on the chipset doesn't come off you can use a hair dryer to heat it. Or, you can cool the MB in the frig for a few hours in to chill the thermal compound.
Either suggestion can damage your MB,
you do this at your own risk!
-If you water cool the NB (SE version) it's best to use plastic clamps or worm drive, from
Anandtech
-The black PCIe x1 port is proprietary for the included sound card
-Yes, there is a 1.03G out there
http://www.xtremesystems.org/forums/...&postcount=806
-It maybe worth the time to put a small 40mm fan on the s/b heatsink
-P5E is an excellent board if you are not looking for the features of the Maximus Formula
-Ultra 120 Extreme and clearance from the South Bridge heat sink using a 8800
http://www.xtremesystems.org/forums/...&postcount=920
-SE has option for 3 thermal sensors however you have to buy the thermal sensor cable separate
-Use a 8-pin 12V connector
-In order to get charted voltage results using OCCT, start Everest and go to:
-Preferences
-External Applications:
Enable shared memory must be checked