Biostar TP35D3-A7 + Cellshock DDR3 14400 + E6850 , 550mhz FSB stable

Biostar TP35D3-A7 + Cellshock DDR3 14400

I finaly have a good kit of DDR3 to test my Biostar TP35D3-A7 and since last Setfsb update,
It also works fine with this board :)


Biostar TP35D3-A7 (bios 8/23)
E6850 L720A696
2*1go Cellshock (CS3222580 - DDR3 1800 8-7-6-21 2GB-Kit) Thanks to David from ITC Multimedia for the kit
Jetway HD 2900xt
Antec TP trio 550w
HM watercooling (~20°)
vFSB 1.55v
vMCH 1.55v


http://www.pt1t.net/biostar/cellshock_14400.JPG http://www.pt1t.net/biostar/cellshock_14400_spd.JPG

http://www.pt1t.net/biostar/cellshock_14400_config.JPG http://www.pt1t.net/biostar/cellshoc...0_config_2.JPG

http://www.pt1t.net/biostar/cellshoc...0_config_4.JPG

SuperPi 1M , 445*9 1:2 , 890 7-6-5-15 1,9v

http://www.pt1t.net/biostar/40GP_TP3...445_890_c7.PNG

SuperPi 32M , 445*9 1:2 , 890 7-6-5-15 1,9v

http://www.pt1t.net/biostar/40GP_32M...445_890_c7.PNG

OCCT , 550*6 , 1:1

http://www.pt1t.net/biostar/TP35D3-A7_occt_550X6.PNG

OCCT , 500*8 , 1:1

http://www.pt1t.net/biostar/TP35D3-A7_occt_500X8.PNG

Max FSB Coef 6

http://valid.x86-secret.com/show_oc.php?id=248152
http://valid.x86-secret.com/cache/248152.png


Max Screen

http://valid.x86-secret.com/show_oc.php?id=248168
http://valid.x86-secret.com/cache/248168.png

nice looking memory but i am more curious about your TP35D3A7-Dlx. i have one here and was getting no where trying to overclock it. i fought to get 450FSB out of it, even on a newer beta BIOS from Biostar than the one your using.

my CPU is good for 560+ FSB like yours on most any other board so it was definitely something to do with the board. now that i have seen your results though i might have to flash the 08/23 BIOS and see what i can make it do.

BTW, what Performance Level where you running for 500FSB and the 560FSB clocks? TIA and again, nice work with that budget board :up:

Quote:

---

Originally Posted by 3oh6

nice looking memory but i am more curious about your TP35D3A7-Dlx. i have one here and was getting no where trying to overclock it. i fought to get 450FSB out of it, even on a newer beta BIOS from Biostar than the one your using.

my CPU is good for 560+ FSB like yours on most any other board so it was definitely something to do with the board. now that i have seen your results though i might have to flash the 08/23 BIOS and see what i can make it do.

BTW, what Performance Level where you running for 500FSB and the 560FSB clocks? TIA and again, nice work with that budget board :up:

---

with an old bios i allready got 500 fsb stable http://www.overclocking-masters.com/...occt-500X7.PNG

I Think , newer bios doesnt improve fsb but it improves ram and some other voltage bug.

For FSB test , i will test asap this motherboard under cascade , my cpu is 620mhz + on P5kE and DFI LP UT P35 , But those motherboard use higher vpll than biostar, and i ll be good they add this function in bios :) .

If the VPLL is matched with the SB 1.5V, I believe i have the mod for both the TP35D2 and TP35D3...

And under Cascade !

http://www.pt1t.net/biostar/cascade.JPG

Max FSB (not from cpu)

http://valid.x86-secret.com/show_oc.php?id=248446
http://valid.x86-secret.com/ccpuz.php?id=248446

http://valid.x86-secret.com/show_oc.php?id=248449
http://valid.x86-secret.com/ccpuz.php?id=248449

nice love the ram you have :)

How many kits did you try for this ?

Quote:

---

Originally Posted by eva2000

nice love the ram you have :)

How many kits did you try for this ?

---

only one :D

Oh i see.. the word 'finally' got a good DDR3 kit had be wondering how many you tried :D

Quote:

---

Originally Posted by eva2000

Oh i see.. the word 'finally' got a good DDR3 kit had be wondering how many you tried :D

---

Before i had corsair XMS 3 ES 1333 :rolleyes:

That explains it :)

so 575FSB max of the motherboard not cpu ? Man i'm still trying to find a pair of E6850 that do 580+ FSB air/water.. so hard to find :(

Quote:

---

Originally Posted by eva2000

That explains it :)

so 575FSB max of the motherboard not cpu ? Man i'm still trying to find a pair of E6850 that do 580+ FSB air/water.. so hard to find :(

---

my cpu takes 573 in watercooling on dfi and ~627 under cascade.

Here with 1.55v vNb/SB i cant do more.

I see so NB/SB voltage limited on this board :)

Quote:

---

Originally Posted by eva2000

I see so NB/SB voltage limited on this board :)

---

and vdimm :D . i have to look for vmod.

but vcore Rox , and no drop. and this board doesnt squeeze when i prime Quadcore.

ptit isn't that the WR superpi 1M at 4ghz? 12.3secs is FAST :D ;)

Quote:

---

Originally Posted by BeardyMan

ptit isn't that the WR superpi 1M at 4ghz? 12.3secs is FAST :D ;)

---

i know , it is fast ... http://www.pt1t.net/PI/1M_40GP_500X8_P5KE.PNG my best 40gp before testing this mobo/drr3.

an occt on a pentium E2220 :D

1.7v really needed @ 3.6ghz !

http://www.pt1t.net/E2220/E2220_occt_300X12.PNG

Quote:

---

Originally Posted by Pt1t

i know , it is fast ... http://www.pt1t.net/PI/1M_40GP_500X8_P5KE.PNG my best 40gp before testing this mobo/drr3.

---

dammit congrats then, haven't seen anyone faster :up: :D

Love your stile pt1t ;)

Impressive results!

Any mods?

i.e. max dimm is 1.85v(1.5v + 0.35v)

How did you get 1.9v for vdimm ?

Quote:

---

Originally Posted by serangel78

Impressive results!

Any mods?

i.e. max dimm is 1.85v(1.5v + 0.35v)

How did you get 1.9v for vdimm ?

---

1.5v + 0.35v gives 1.91v real ;)

If someone knows the NB/SB , Vdimm and vMCH mod , he is Welcome :p

hmmm 1M Superfast
32M kinda suxorz a little for the settings posted :(
any reason for that

Quote:

---

Originally Posted by dinos22

hmmm 1M Superfast
32M kinda suxorz a little for the settings posted :(
any reason for that

---

Yep , i did 32M just to test stability after the 1M , on tweaked win for 1M all cpuz & other windows open.

Many RT9214s are applied to TP35D3

One of RT9214 is for VMEM.

http://www.datasheet4u.com/html/R/T/...ology.pdf.html

But not sure. :(

Quote:

---

Originally Posted by serangel78

Many RT9214s are applied to TP35D3

One of RT9214 is for VMEM.

http://www.datasheet4u.com/html/R/T/...ology.pdf.html

But not sure. :(

---

yeah, i didn't bother to figure the vmods out because i couldn't get my board to clock well at all but the RT9214 is pretty much everywhere on this board. here is where it is near the DIMM slots:

http://www.3oh6.com/forum_posted/0710/xs/layout-5a.jpg

and another one close to the northbridge:

http://www.3oh6.com/forum_posted/0710/xs/layout-10.jpg

Pin 6 is the FB pin and pin 3 is GND so if you solder a VR to 6 and 3 you should be in business. not sure what the resistance should be though for each, you will have to do some checking. again, i haven't tested or even probed them, just making an educated guess. HTH

nice results!
did you buy it or did itc lend it to you?

Quote:

---

Originally Posted by Pt1t

my cpu takes 573 in watercooling on dfi and ~627 under cascade.

---

thats def a good cpu then, the 6750s i have here only do around 620 under ln2.

Quote:

---

Originally Posted by Pt1t

Here with 1.55v vNb/SB i cant do more.

---

yeah, you def need a vmch mod badly, to get 1900+ stable you need 1.65+ i think.
Did the sb voltage help at all? i always left it at default so far...

max vdimm for this board is 1.95 or something right? too bad...
freak had this board at the awardfabrik ln2 party this weekend, but he couldnt get it to clock well i think. he said with the latest bios all dividers work until 400fsb, after that only 1:2 works. he tried systool but the pll of the board isnt supported yet, maybe itll work with some setfsb or clockgen option...

i think the 400fsb thing is a strap or perf level thing... how is the perf level setting on this board?
close to the max or can you always lower it by at least one level like on the p5k3?

oh and 3oh6, awesome pics and thx for sharing the mod infos, good stuff! :toast:

btw, pt1t, did you try the white slots on the board?
curious if they are better than the first ones like on the p5k3 :D