Thermal Grease Roundup!

http://www.expreview.com/img/topic/t...grease/511.jpg

We've got LOT of thermal grease. So we decide to compare 16 of them.
We decide to use GPU to do the test coz the die is small,easy to smear it smoothly, installing the cooler is also easier than CPU's.

Spec of 16 thermal greases
http://www.expreview.com/img/topic/t...ease/all31.png

http://www.expreview.com/img/topic/t...ease/all32.png

http://www.expreview.com/img/topic/t...ease/all33.png

http://www.expreview.com/img/topic/t...ease/all34.png

http://www.expreview.com/img/topic/t...ease/all35.png

apply one drop on the middle of the die, and press down the cooler hard to make them spead out.
http://www.expreview.com/img/topic/t...e/DSC_2514.jpg
http://www.expreview.com/img/topic/t...e/DSC_2521.jpg

and here is our test platfrom:
http://www.expreview.com/img/topic/t...ease/pal-2.png

http://www.expreview.com/img/topic/t...ticlean_01.jpg
we use Arctic grease remover to clean up the die and the cooler every time we change the grease.


Final result:
http://www.expreview.com/img/topic/t...se/paste01.png
http://www.expreview.com/img/topic/t...se/paste02.png

AWESOME.

STICKY ! ! ! !

(Although some of the information flies in the face of every other review I've seen to date......)

are they all applied the same way? cause some tims have different ways to apply, and if not applied that way, it'll screw up the performance.

most TIMs have curing dates. mx-1 drops temps progressively for 2 to 3 weeks.

yup thats true most thermal compounds need burn in time the temps were pretty much the same through some of the popular ones so anything is good enough for me.

Quote:

---

Originally Posted by Boogerlad

are they all applied the same way? cause some tims have different ways to apply, and if not applied that way, it'll screw up the performance.

---

yes.you can see in this pic:
http://www.expreview.com/img/topic/t...e/DSC_2521.jpg
we apply one drop on the middle of the die, and press down the cooler hard to make them spead out.

Quote:

---

Originally Posted by Nooc

most TIMs have curing dates. mx-1 drops temps progressively for 2 to 3 weeks.

---

we already consider that in our test. all greases are have use the offical break-in time to "cure" the surface. :D

it *looks* like a good test but i cant read half of the stuff :/

Quote:

---

Originally Posted by Origin_Unknown

it *looks* like a good test but i cant read half of the stuff :/

---

Then just read the numbers ;)
Awesome table there, nice to see AS5 still hanging in there :)

Best Regards :toast:

Quote:

---

Originally Posted by DTU_XaVier

Then just read the numbers ;)
Awesome table there, nice to see AS5 still hanging in there :)

Best Regards :toast:

---

lol why didnt i think of that ? :rofl: