O.K., so I would like see the highest FSB you're getting with your Q6600 G0 and actually able to at least get in Windows! Please post Mobo, PSU and Ram and the FPO/BATCH Number. And if possible, a screenshot or even CPUZ Validation. Thanks.
Printable View
O.K., so I would like see the highest FSB you're getting with your Q6600 G0 and actually able to at least get in Windows! Please post Mobo, PSU and Ram and the FPO/BATCH Number. And if possible, a screenshot or even CPUZ Validation. Thanks.
System:
- Intel Core 2 Quad Q6600 L725A903 7/31/07 pack date G0
- CPU cooling = Swiftech G4 Storm/Thermochill 120.3/MCP655
- NB chipset cooling = Radiical Chipset Block/Corsair Cool single 120mm fan Rad/MCP350
- Asus Blitz Extreme 0804 bios
- 128MB Gainward FX5200 PCI
- 2x1GB OCZ PC3-14400 Platinum - DDR3-1800 rated at 8-8-8-27 at 1.9v
- 500GB Seagate 7200.10 SATA on SATA1 Port
- LiteOn 165H DVD Burner
- Sony FDD
- 1KW OCZ ProXStream
- WinXP Pro SP2
6x493FSB 3:5 1T
Here's some benchmarks back on 6x cpu multiplier @493FSB to start with. This time I changed command rate on memory as well from 2T to 1T.
http://fileshosts.com/intel/Asus/Bli...151_all_tn.png
http://fileshosts.com/intel/Asus/Bli...5m27s860ms.png
http://fileshosts.com/intel/Asus/Bli...ndwidth_tn.png
http://fileshosts.com/intel/Asus/Bli...nebenchr10.png
Sandra XI SP2
Buffered
http://fileshosts.com/intel/Asus/Bli...em-buff_tn.png
Unbuffered
http://fileshosts.com/intel/Asus/Bli...-unbuff_tn.png
450Mhz FSB
L726A
EVGA 680i SLI A1
Antec TPQ 850w
http://valid.x86-secret.com/show_oc.php?id=239025
Not to thread crap, but the FSB is going to be more limited by the mobo than the chip itself, as I'm sure my FSB will go higher on a P35 chipset.
You're not, it's always good to know results with different hardware combo.Quote:
Originally Posted by CraptacularOne
why only Q6600 G0?
http://img377.imageshack.us/img377/8...fsbcpuzkl2.jpg
http://valid.x86-secret.com/show_oc.php?id=224345
Q6700 G0 L724A
P35-DS4
Giga-EZ 1000w
515FSB dry ice
500FSB air
:D
^^^ Very Nice and good Point, but said Q6600 G0 because that's what most of us are running. Also please don't be lazy, please post your setup. Thanks.
Everything you need to know is in my sig below.
http://img410.imageshack.us/img410/489/530ne1.png
just running 401 for 24/7 use. the extra amount of voltage to the chipset needed for 450 isnt worth the gain imo. I cant tell a diffrence day to day
Q6600 G0 L723A730
Evga 680i
OCZ 700w
OCZ PC2-6400 Elpidia IC
450-465~ max fsb (so far..)
CPUZ Valid:
http://valid.x86-secret.com/show_oc.php?id=239834
Other info:
http://www.xtremesystems.org/forums/...&postcount=265
500X7 Prime95 small FFT 30mins
http://img161.imageshack.us/img161/6...95smalltd2.jpg
500X8 Superpi32M passed
http://img105.imageshack.us/img105/8...66strapqe4.jpg
:yepp:
450 was the highest for me (8x450). See my post in the Q6600 overclocking thread. However, this was a stable speed.
No voltage bumps required for anything other than the CPU.
Q6600 G0 L723A674- yeah nicepun it's your chip :yepp:
Gigabyte P35-DS4 bios F6/ wc- Apogee GT
max FSB:
http://img182.imageshack.us/img182/7218/maxfsbfi3.jpg
http://valid.x86-secret.com/show_oc.php?id=239901
max freq:
http://img211.imageshack.us/img211/6721/maxfreqfd7.jpg
http://valid.x86-secret.com/show_oc.php?id=239907
Motherboard : DFI P35
RAM : Cellshock 9200
CPU : Q6700 L720A988
Cooling : Water, Laing,Mora,Alphacool NexXxoS XP Rev.2.0
http://www.abload.de/thumb/max_fsb_q6700brf.jpg
http://valid.x86-secret.com/show_oc.php?id=239645
Nice to see quite a few people with 490+ FSB. Keep them coming!!!
Merc/12.469s/P5K Deluxe/Core 2 Q6600G0 @ 4050MHz/5-5-5-11 2T (540MHz)/Water/09-10-07
http://img181.imageshack.us/img181/7...469sxe4.th.jpg
Everyday overclcok is 3600 Mhz at 400MHz FSB, 1.46v Vcore.
this my Q6600 L724A858 with thermalright 120 xtreme...:) :)
http://valid.x86-secret.com/show_oc.php?id=241962
http://img.techpowerup.org/070913/488.jpg
Hi guys!
here's mine, though the problem is that two cores were disabled?
http://i196.photobucket.com/albums/a...eukph/4952.jpg
can you help me out here?.. The funny thing is that I could not boot at 470 but boots at 465.. also boots at 490 with only 2 cores.. I did not disable them.. TIA for any help and tips.. thanks!
Specs are in my sig.. thanks..
You have 500x9 stable on P5K vanilla :eek: Can you give me a shoot with speedfan Vcore graph/charts/ opened and running Prime with over 1.55v. I'm i the only one having problems with this board:rolleyes: Voltage regulators are crap whet it comes to heavily load and they droops me down down and down until prime crashes:mad:i.e. when i set even 1.5 or 1.6v under continuous load with Prime Vcore drops even under 1.4v and when Prime crashes it goes up again:(Quote:
Originally Posted by DFI pit bull
On topic:
470x9 max benched on water MP05LE
720B035 Vid 1.2625v
http://img440.imageshack.us/img440/1...4968ug1.th.jpg
Edit: Mine is also Vdroop modded
500x9 is not 100% stable, however i am able to play games for hours @4.5 and run a few benches, i've never been into stabilty only max oc. I don't seem to get any droop on my p5k, if anything the vcore slightly increases under load:DQuote:
Originally Posted by DStealth
Can't give you any screens atm as i'm at work on nightshift, will try tomorrow if i have time.
I will modify my mach2 soon hopefully i'll see 4.8 on this chip. One more thing i'm well happy with my max oc (4630Mhz) as I only paid £50 for my mach unit which is a lot less than most watercooling kits.
My highest was 475 x 9.....
I wasn't able to get it 100% stable tho.... It's 100% stable at 450 x 9
~Mike
9x511MHz , 1.69V Max. Super PI 1M Benchable speed *FSB Limited Chip :(*
- Q6600 G0 , L721A814 , 07/31/07
- Mouse Pot Rev.3 @ LN2 ~ -120C
- DFI LP UT P35-T2R , BIOS 8/23
- 2x1024Mb D9GMH Corsair C3DF
- SilverStone OP1000 , 1000W
http://img490.imageshack.us/img490/8254/11125th5.jpgQuote:
Voltage Settings
CPU VID Control: 1.6000v
CPU VID Special Add: 110% (?)
DRAM Voltage Control: 2.49
SB 1.05V Voltage: 1.217
SB Core/CPU PLL Voltage: 1.75
NB Core Voltage: 1.61
CPU VTT Voltage: 1.60
Vcore Droop Control: Disabled
Clockgen Voltage Control: 3.60v
GTL+ Buffers Strength: Strong
Host Slew Rate: Weak
GTL REF Voltage Control: Disable
x CPU GTL1/3 REF Volt: 115
x CPU GTL 0/2 REF Volt: 115
x North Bridge GTL REF Volt: 115
WOW... My board is FSB limited.. two GO's, and a B3 max out at ~450MHz FSB.... Are all the DFI boards looking this nice?
Quote:
Originally Posted by Gorod
here's mine :D
highest fsb :
cpuz validation : http://valid.x86-secret.com/show_oc.php?id=244367
http://valid.x86-secret.com/ccpuz.php?id=244367
highest on 9x multi (aircooling) :
http://img231.imageshack.us/img231/7...termarkkh0.png
cpuz validation : http://valid.x86-secret.com/show_oc.php?id=244389
tnx :)